Ni-nuka
Girls, I have a problem! The cartoon has lived with me for about two months, I can’t get enough of it. And yesterday I managed to scratch the bowl with a wedding ring (I smeared it with oil before baking). We got 3 such scratches 2-3 mm long. On a golden day - so black, I discovered today. Upset, not hands, but hooks! ..
Well, now you have to change the bowl? (And this is after she praised her assistant on a "friendly" site - she jinxed it)
Ksyushk @ -Plushk @
Ni-nuka , very deep scratches? If possible, take pictures of them and show them. Elena will tell you, looking at the photo, whether it will be possible to continue using the bowl or not. And don't be discouraged ahead of time.
Vasilica
Elena, I will quote myself
Quote: Vasilika

Here I read, observe, and there were some conclusions. It seems to me that a lot of condensation flows down precisely because the lid does not open completely and therefore some of the liquid that should be retained in the rubber rim simply overflows the plastic storage (sides) and flows down inside. I almost always (especially if I cook soups) a lot of condensation, of course I catch it when I open the lid (and risk getting scalded by the steam) with a napkin, but I still have a little time to leak out. Then, when I take out the bowl, there are always droplets on the wall, I also wipe it with a napkin. And please do not confuse condensation that drips off the lid with condensation on a cold bowl. I personally never put the bowl in the refrigerator, after washing, I always wipe it dry and put it back in the cartoon (I don't have much extra space in the kitchen).
They also gave advice to check the level of the table, I already wrote that Brandik put it in the same place where the lacuchin used to be. But I decided to check, put a napkin under the front legs and when I poured oil, it became clear that now the level had shifted (the oil was glass closer to the far wall of the bowl), but the condensate was really not so fast trying to fill the saucepan.
As I already wrote, when I open and catch myself, there are really droplets inside. But I am afraid that if the condensate does not get wet, then suddenly a lot will flow and something will close in the cartoon, and the children still
Vasilica
Quote: Ni-nuka

Girls, I have a problem!
Well, now you have to change the bowl?

Do not worry, what Brand is good at is the availability of spare pots, when I bought a multi, I immediately ordered an additional bowl, very convenient
Manna
But I'm all so hopeful for a stainless steel Elena, nothing has become known about it yet?
Elena Br
Quote: Vasilika

Elena, I will quote myself :) As I already wrote, when I open and catch myself, there are really droplets inside. But I am afraid that if the condensate does not get wet, then suddenly a lot will flow and something will close in the cartoon, and the children still
Don't worry, it won't close. The electronics in this model are higher. And the wires that are connected to the heating element are insulated very reliably.

Quote: manna

But I'm all so hopeful for a stainless steel Elena, nothing has become known about it yet?
Manufacturers cannot yet offer us a stainless steel bowl for MB 37501.

Manna
Quote: Elena Br

Manufacturers cannot yet offer us a stainless steel bowl for MB 37501.
Oh, what a pity. And this is yet? Or is this even unlikely?
Dusha
Hello Violet! Buy the Brand, you will not regret it, I have been using it for a month and I am very glad that I made the right choice. Before that, I read for more than a month wherever you can find reviews about Panasonic and the Brand. Many people who have used Panasonic, then acquire the Brand and praise it more. During the time I bought MV, I didn't cook at all on the stove.The only thing I regretted was that I hadn't bought the second bowl right away.
Phi @ lka
Dusha

Good evening, tell me, what is your model? Have you identified any flaws in the use process?
JIucu4ka
tell someone, and the cartoon in the complete set with potholders still with the old lid: well, in the sense of "oblique" it will not be there?
vernisag
Quote: JIucu4ka

tell someone, and the cartoon in the complete set with potholders still with the old lid: well, in the sense of "oblique" it will not be there?
There was the first batch with potholders and the lid there opened smoothly, and now they come with two steamers and a lid, they wrote so it will be with a tilt ...
Phi @ lka
Hurrah! Today I accidentally found out that they bought me a cartoon Brand 37501 as a birthday present. That's it, the problem of choice is solved, now I'll wait for the present.
JIucu4ka
Quote: vernisag

There was the first batch with potholders and the lid opened there smoothly, and now they come with two steamers and a lid, they wrote so it will be with a tilt ...
fine! Thanks for the quick response! So I will get it without a slanting lid and what kind of steamer was it? top or bottom?
vernisag
So, and from the first batch there are no longer cartoons on sale ... now everything is with two pairs. and an oblique lid ...
JIucu4ka
Quote: vernisag

So, and from the first batch there are no longer cartoons on sale ... now everything is with two pairs. and an oblique lid ...
they send me a cartoon today, they said potholders according to the configuration, did they cheat the steamer?
vernisag
Well, we can lay around where since the new year ...
Ivanovna
Hello everybody! Please tell me, now what if all the toons 501 will have a slanting lid, or can you wait as before with a straight line? I wanted to send my nephew to Ukraine for his birthday.
vernisag
Well, take it, there is nothing terrible there, there is not a big slope of the lid which does not interfere with the cooking process
Melisa72ru
Today, almost a month and a half after receiving MV, I cooked buckwheat ... (I remind you that I have MV with a slanting lid).
I threw 1 cup of buckwheat, 2 water and another piece of butter, put some salt, put Buckwheat and left, wandered for two hours ... I came, buckwheat has been heated for a long time ...
She opened it, easily pushed the buckwheat aside ... Warmed up the main course, added buckwheat and had lunch. Spreading buckwheat, not boiled, did not burn anything. In general, the test for buckwheat is passed.

Testing multicooker Brand 37501

and closer
Testing multicooker Brand 37501
Lerele
This slanting lid does not interfere, the pan comes out without tilting. That is, you do not need to tilt it to pull it out. I haven't read it yet, I didn't even pay attention.
Ksyushk @ -Plushk @
LereleHave you met Brand after all? Congratulations ! I wish you a long, fruitful, tasty friendship with him!
vernisag
But I still broke my lid ... Testing multicooker Brand 37501 Testing multicooker Brand 37501
irman
Quote: vernisag

But I still broke my lid ... Testing multicooker Brand 37501 Testing multicooker Brand 37501
Irish, it's not for nothing that you complained about her. What a pity.
Ksyushk @ -Plushk @
Quote: vernisag

But I still broke my lid ...

Iraaaaaaaa, did you want to correct her? It's a pity how.
vernisag
I poked it, poked it and poked it in general ... I thought the spring was just tight ... For that now it opens well ...
Maribu
That's how great it is when people are more positive. Well, who else is the lid in the way? ..
lobacheva
Quote: Lerele

This slanting lid does not interfere, the pan comes out without a slope. That is, you do not need to tilt it to pull it out. I haven't read it yet, I didn't even pay attention.

But for me, in order to take out the pan, it still SHOULD be tilted, or it clings to the middle of the lid, where the hole is. And these are not whims but a fact.
And there is enough positive in us, otherwise they would have returned the cartoon a long time ago, otherwise we are preparing. We get used to it quietly, after another multi, where can you go, the family needs to be fed.
vernisag
Quote: Irman

Irish, it's not for nothing that you complained about her. What a pity.
Quote: Ksyushk @ -Plushk @

Iraaaaaaaa, did you want to correct her? It's a pity how.
Don't cry girls, well, it's my own fault, I'm always going to fix everything myself ...
lobacheva
Quote: vernisag

But I still broke my lid ... Testing multicooker Brand 37501 Testing multicooker Brand 37501
So now, in order for the lid to open well, you need to unscrew it and sharpen these pins, which interfere, so to speak, modernize-adjust. But I was already starting to unscrew it on the sly and was afraid.
Is she now cooking just as well, or has something changed?
vernisag
I have not cooked in it yet, there are wires sticking out of the holes ... I think the condensate will get there or not ...
vis
Quote: Lerele

This slanting lid does not interfere, the pan comes out without a slope. That is, you do not need to tilt it to pull it out. I haven't read it yet, I didn't even pay attention.

If the lid is tilted, how can the pan come out without tilting?
My lid tilt is strong enough, it interferes.
I also tried to bend it all, but it feels like it is rigidly fixed, there is no spring.
Vasilica
Wow!!! I also want to open mine all the time a little harder (I think it can stretch), now I won't, otherwise I'll break it too. And I would be afraid to cook, all the same the wires are visible, suddenly what will close.
Manna
Quote: vernisag

I have not cooked in it yet, there are wires sticking out of the holes ... I think the condensate will get there or not ...
Irish, in theory ... a silicone gasket presses the lid along the edge of the bowl, and during cooking, condensation should not fall into those spontaneously formed holes. But this is in theory ... But in practice I don't know how it will be ... And, probably, when you open the lid, moisture can now get there - the lid now opens completely ...
vernisag
So I showed you the girls so that you do not repeat my mistakes. Do not bend the lid, do not break, figs with him with this slope ...
vernisag
Quote: manna

the silicone gasket presses the lid along the edge of the bowl, and during cooking, condensation should not fall into those spontaneously formed holes.
Manna, I thought so too, but I always open the lid with a rag in my hand and immediately wipe it off.
Vasilica
Quote: vernisag

So I showed you the girls so that you do not repeat my mistakes. Do not bend the lid, do not break, figs with him with this slope ...

Thank you, sorry for your cartoon. Interestingly, the service will be able to replace the cover, although of course this is not a warranty case
lobacheva
It seems to me, too, that the condensate should not get into it during cooking. After all, there is a rubber stopper-seal along the edge of the lid, it should fit snugly to the saucepan. So, for reasons of reason, condensation should not pass outside this ring. only when you open it if, but also like it shouldn't get, if you wipe it right away. But this is my personal opinion
Phi @ lka
Oh, what a pity for your cartoon. But the service will surely be repaired and will be as good as new!
Elena Br
Quote: vernisag

But I still broke my lid ...
During cooking, steam should not enter, but when the lid is opened, it can. I recommend contacting your service center to replace the cover. Otherwise, this defect may lead to damage to the multicooker.
Lerele
It can be seen that the lid is tilted less, 4asha enters without tilting.
Lerele
Quote: Ksyushk @ -Plushk @

LereleHave you met Brand after all? Congratulations ! I wish you a long, fruitful, tasty friendship with him!
I’ve already been robbed, I’m looking again, but I’m more needed because I’m waiting for an opportunity from Russia.
Favorite
I bought 37501 from a new batch to relatives as a gift. I could not resist, climbed in to see everything - touch - test. Sloped lid. But the bowl is removed normally (with a slight tilt, but, as far as I understand, no one fills it to the brim, even the soup is not cooked to the last rice, so in my opinion there are no catastrophic changes. I'm afraid my husband will not agree to another cartoon .. ...
Ksyushk @ -Plushk @
And today I also have some kind of riot on the ship. For some reason, the countdown in the PAR mode began immediately, and not after boiling. It boiled when there were 4 minutes left before the end of the program (put PAR - Vegetables). What? I don’t understand how
Luysia
Did you pour cold water?
Ksyushk @ -Plushk @
cold. true a lot, under the maximum.
Vadim Solynin
Quote: vis

If the lid is tilted, how can the pan come out without tilting?
My lid tilt is strong enough, it interferes.
I also tried to bend it all, but it feels like it is rigidly fixed, there is no spring.

The pan can be pulled out without tilting. For all doubters, we will shoot a video.
Quote: vernisag

I poked at it, poked and poked at it in general ... I thought the spring was just tight ... For that now it opens well ...

Please don't break the covers !!! There are special projections that limit the opening angle.
Luysia
Quote: SVP

The pan can be pulled out without tilting. For all doubters, we will shoot a video.

A very good idea!
Luysia
And we have for dinner today Hawaiian chicken cutlets :

Testing multicooker Brand 37501 Testing multicooker Brand 37501

Ksyushk @ -Plushk @
Luda, chicken with pepper and cheese?

Or is it yellow corn?
Luysia
Corn cutlets with sweet pepper, delicious. I will definitely post the recipe tomorrow, today I am lazy.

All recipes

New recipe

New Topics

© Mcooker: best recipes.

map of site

We advise you to read:

Selection and operation of bread makers