Kenwood kitchen machine: working with attachments

Wow !!!! Class! And if there is no rubbing, as I understand it, can you grind cookies and cottage cheese in a food processor? I never added cottage cheese to potatoes)))

Most likely, this is how grains will be felt
Grains of cookies are nonsense, but it is better to take plastic cottage cheese, without grains.

I never added cottage cheese to potatoes)))

Try it, no worse than with butter, but at the same time you don't feel so much like a glutton, there is even an illusion that you are eating very healthy food

This is most likely a spare drum for the AT643

No, not an option for AT643. I have this nozzle, I don't really use it, but this thing in the photo is definitely not for it))
And if it is for a meat grinder ... interesting. Maybe then 643 is not needed separately

And if it is for a meat grinder ...

No, it won't work with a meat grinder either. There should then be a long pin like on a meat grinder auger.

Kenwood AW20010006

This is for the small bowl.
You can also fit under a large one, but the pin is still thinner.
Would like with the right pin.

And not in a hurry, because I have an unexpected waste - a new monitor instead of a broken one.

So:

Or maybe a recipe?

Or maybe a recipe?

For the recipe, pictures are needed, but I did everything quickly, so there are no pictures.
And everything is so simple that it seems that a separate recipe is not needed.
However, if I do it again (I will definitely, but when), I will try to take a picture and arrange it.
Or at least tomorrow, when everything is fine, I will take a photo of the finished one - there will be something to demonstrate the recipe. True, I did not decorate

[Olga VB]

Olga VB, for the recipe, you can also have the final photo.
Step-by-step photos, it is always good, but not all recipes have it.

Because I am interested in cottage cheese, but I will not do it tomorrow, but I will be lost.

I have my own cottage cheese, it is not grainy, but cookies, I think you can chop the processor, and then as it is written

[about]

I also have my own curd, it is very plastic, but I still passed it through a sieve just for the company with cookies - I could not do it.
This is from kefir ice cream.
And if you cook it, or if you do not make it from a store kefir, but from your own, then the cottage cheese turns out to be denser, although not grains, but it is better to wipe it all the same through a sieve for greater uniformity and airiness.
Here, of course, you can just chop the cookies, especially if you make them without nuts - then the grains of cookies will just replace the nuts. Only the taste will be a little different - so what!
True, this also gets the processor dirty, so a sieve is better - with baboutthe greatest benefit to the end result.
Okay, tomorrow I'll try to do

[Olga VB]

Olga VB, I don't have a sieve
And sourdough curd.

Yes, and I am for the recipe !!! You should definitely try! But I will also not do it now, maybe on a diet

[Vlad_Ru]

No, it won't work with a meat grinder either. There should then be a long pin like on a meat grinder auger.

Vlad_Ru, yes, to the AT950A meat grinder and a free-standing MG510, so that doubts disappear, look at the photo

There are such ones for Bosch, only with a limiter made of transparent plastic. Probably Kenwood's innovation. Look at KU.

And I'm for the recipe!))

There is a video on YouTube about this (?) Attachment. The number is the same, but the name is different.

[Skazi]

Skazi, Galya, yes, it's all the same. The Germans call it an addition to the AT950 meat grinder attachment and for freestanding Kenwood. Thanks for the video, I like this thing)))

What a good thing!
Interestingly, is there such a thing by 955?
Where is such a treasure given and how much?
Now this low-speed grater is practically unnecessary

[Olga]

Olga, on CU give. But the price is not humane for one drum.
But how to cut the slices? In low speed they are, but here it is just a grater.
On the contrary, I'm staring at 643.

[Peter Push]

Peter Push, Yes, I agree! was wrong thinking it instead of the auger.

But how to cut the slices?

So slices can be used both on a high-speed one and in a processor, but you can't rub nuts there. And the price, yes, not very pretty.

And the price, yes, not very pretty.

Dear stakeholders! This is new, soon there will be discounts, and if you also buy something for the company)))

[Peter Push]

Peter Push, on the KU near the nozzle it is written: Listed since: April 2012. It does not seem that this is a novelty. And the video is old too.

And if you look at the manufacturer not Kenwood, but Jupiter, then the drum is much cheaper. However, I do not know if he will stand on Kenwood.
🔗

And there is another one, without a picture, but the number is the same and the name contains the word Kenwood. And also cheaper.
🔗

Here on the first link you can see that there is not just a drum, but also an auger inside. And then I did not understand, due to what there is something rubbing.
It's a pity, of course, that there are no characteristics - neither the diameter of the drum, especially the part that is fixed with the nut of the meat grinder, nor the square of the auger, so just look for these characteristics or the real owners somewhere.
Here's an interesting pricing: KitchenAid has a drum with a plastic casing and the nozzle is the cheapest, and for Kesha without a casing it is the most expensive.

Please do it separately, because often you want to get the result "the same"

Olya, if I don’t find such a recipe, I will definitely do it, but, to be honest, I am also stopped by step-by-step photos, but on the other hand, I can “get stuck” in important details

step by step photos stop me too

So, you are ...
You don't take the wrong examples from me, you take the right ones!

Perhaps some of you will come in handy

Olya, thanks! It will be very useful, I make the cottage cheese myself, I will try to make it in the processor, it is not known when my hands will reach the sieve, so I walked around, recently I also bought a sausage syringe, a great thing, Miranda urgently needs to run into the subject and carry a "thank you"

You don't take the wrong examples from me, you take the right ones!

I'm a photographer, like a sieve from a dog's tail (C)

I'm a photographer, like a sieve from a dog's tail

Sisra!
But that doesn't excuse us

Olya, I, after all, made these "potatoes" - I liked mine, but especially those that are not fat! Instead of syrup, there was Tiramisu topping and a Dairy cookie, so the taste is not authentic, but magic phrase the rest is all according to the recipe!
Thanks for the idea ! You can add milk powder, rub the chocolate, and chop and roll coconut flakes, make small sweets.

You can add milk powder, rub the chocolate, and chop and roll coconut flakes, make small sweets.

Well, yes, I do that sometimes.
It all depends on the amount of cocoa, on the dryness of the cottage cheese, on other components - and each time a new taste is obtained.
And if you roll the candy in cocoa, it's almost a truffle!

Hello everyone. Here you will laugh at me But I will not buy another Kesha 096 tomorrow I will go for the AT 320 chopper And all because I found a display case for 2200 r)))))) I'll go tomorrow and see if I’ll take everything, I have an order in reserve worth))))))))))) Another would be to find a bowl)))

[Pandochka]

Pandochka, bowls were not on sale, in my opinion.

[Pandochka]

Pandochka, bowls were not on sale, in my opinion.

Eh, so you have to buy with Kesha))))

Good day! Can anyone tell me what Kenwood's policy is regarding the sale of baits? Those that are on sale in internet stores of household appliances such as mvideo, media market and the like, are they remnants of a former luxury? And will further sale of attachments be carried out only through the official store? I want to order a car at the beginning of August, but now vague doubts began to visit me, and suddenly after buying a car I will have to add. attachments (meat grinder, sieve, multi-chopper) buy at exorbitant prices

[Pandochka]

Pandochka, see that this display case contains at least a couple of spare jars. In Eldorado, they are very incomplete. And so that the gasket is in place.

[Pandochka]

Darkusha, Elena!
Good day! Yes, you wrote everything right! In retail chains, the leftovers are being sold. The cars themselves will be sold only at the office. site, but I think the attachments can be found on the Internet, only at what prices In this thread they wrote about it.

Pandochka, see that this display case contains at least a couple of spare jars. In Eldorado, they are very incomplete. And so that the gasket is in place.

Uhhhhh I am, damn it, I'll be very upset then (((
Thanks for the info, I will definitely take it into account. And the gasket is meant in the cover with a knife?
There are also such attachments:
1. Attachment for cooking tagliatelle KENWOOD AT971A - 4139 rubles.
2. KENWOOD A950 meat grinder attachment - 3 689 rubles.
3. Nozzle for cutting with cubes KENWOOD MGX400 - 3599 rub. (showcase sample)
So I'm thinking of looking at them too, although I don't know how it should be in the original



Who has a nozzle in cubes, tell me how difficult it is to wash it by hand?)))) Let's say, for the sake of a small salad, you use it, or is it easier to cut with a knife than to get-attach-cut-disassemble-wash the nozzle?))) Simply, I in the store I will look at the display case, if the nozzle is in good condition, why not buy it for 3600 r instead of 10000 r. And what may be wrong in it, what to look for during examination? Advance merci !!!!

[Pandochka]

Pandochka, in a display case, anything can be wrong. Maybe she was falling.
Or someone bought it, it turned out to be a marriage and substandard, handed it over, they put it on the window.
Or which screw was removed, you will not immediately understand.
Noodle cutters are wildly squeaky. For good reason, put it on a car and try it, but there may not be a car in the store.

A little salad, and a lot too, for me personally, it is much more convenient to chop it into a round with strings. But this is my personal IMHO. For preparing your vegetables in the freezer, yes, it's a good unit, but for the sake of salad, for me, so many body movements have to be done with a nozzle.



With cups of a chopper on my blue eye in Eldorado, they proved that since the nozzle is written, in the singular, then one piece should be sold - a glass with knives. Without any jars and lids.

[Twig]

Twig, here I am of the same opinion))) So I will not bother and buy too much for now, which may not be useful at all) I just think that the price of 7000 r is too high for a shredder! So there is also 2 weeks for a return, and I will order the machine tomorrow (on Wednesday they will already be delivered), I can also try the grinder attachment (if I don't see any obvious flaws).

With cups of a chopper on my blue eye in Eldorado, they proved that since the nozzle is written, in the singular, then one piece should be sold - a glass with knives. Without any jars and lids.

But this is cool))

Prices are certainly overpriced!
For 7 thousand it is easier to buy a separate coffee grinder. Even two.
Or a meat grinder. For 8 thousand, in addition to the meat grinder attachment, you can buy a separate unit and not force Kesha. This unit may even be called Kenwood and will be suitable as a nozzle for Kenwood. And also meat grinders come with a cube cutter right away. With the one that is sold separately as a nozzle. For a price lower than buying these attachments separately.

[Twig]

Twig, exactly!!!
I have a Boshevskaya meat grinder, it works quite well for myself)))) But I want a cubic carver, but so that it is not very troublesome. I have an alligator, it's fun to cut it, but it's still not a machine gun. I have not seen a meat grinder with a cubic cutter in one, you have to climb in the internet.

Sitting at the dacha, 200 km from Moscow, I ordered myself a nozzle for 096. I didn't leave such a car at home, I took it with me. Now every day I rejoice at my purchase. The last thing I ordered is the AT320 at the Mediamarket. True, only on July 7 they will be brought to the post office and they will have to go to Ivanovo. But I decided to combine business with pleasure = go to textile stores. Rather, I deliberately ordered a receipt there. In Vladimir it would be closer.
I was surprised that in some online stores, where there were nozzles at an affordable price, suddenly everything disappeared right away! I took my attachments to Premium Electronics. The last one I bought was even sent by mail to the village. Then I planned to buy something else from them at their price. But then I go to them just to look, and there is not a single nozzle left. I had to order glasses in the Mediamarket.

I want to buy an AT 941a mill for grinding almonds into flour. For purchased flour, questions and doubts about its purity (will it be watery?), Grinding almonds in the AT 320A grinder is not convenient. But I found restrictions on the use of AT 941A for nuts and coffee. Who uses this attachment, please tell me why it is not suitable for nuts, or maybe it can be used for this purpose? Does anyone have any experience with other methods of making almond flour? I would be grateful for your answer.

[Yutan]

Yutan, in MediaMarkt they ordered a display case with 3 glasses for 3200 r? I did not find any other options there.

After I wrote on the forum, I decided to go to mvideo, was there last week and saw attachments for Kenwood (meat grinder, cube and chopper). They had the same attachments in their online store, but today the grinder was no longer there. So I went to have a look. shredder 3190.

I want to buy an AT 941a mill for grinding almonds into flour.

ABOUT! I remembered. How could I forget?

At the master class, Alice talked about the mill and what almonds do in it.

Coffee, sugar, raw nuts, and other oil-containing ones are really not allowed.
But dried / roasted almonds become dry and can then be (and other toasted nuts). Alice said that she has been doing this for a long time.

Five times she asked about it, in the end she laughed, they say, as if she was doing this, and offered to come with dried nuts and try on a master class machine, if I'm so afraid of ruining my mill.

Does anyone have any experience with other methods of making almond flour?

I did it in a regular coffee grinder several times. Only the nuts are best kept in the freezer for at least half an hour. I took out in parts and ground a little, and with pauses. The coffee grinder works for 5-10 seconds, a break, then again. Sift the resulting flour through a sieve, grind large pieces.
Before freezing, nuts must be well dried.

Yesterday they gave me the cache from the repair.
Replaced his gearbox and hook.

[Tan_ch]

Tan_ch, Hurrah

And why the reducer? Was he wrong, too?

took a new sealing rubber on flexi from the service today.
for attachments, the same warranty applies.

Girls Miranda and Tan_ch thank you for your reply. I also did it in a coffee grinder, but if you need to process a lot of almonds, then this is very routine. Nuts that are well dried and chilled in the freezer can still turn into gruel in a coffee grinder (if grinded for a long time).
Miranda, a very interesting and detailed review of the nozzle. Thank you. But still I'm still thinking, I'm not sure what I will buy.

[Tan_ch]

Replaced his gearbox and hook.

Tan_ch, I am also happy for you, the renovation took so long, but Kesha is already at home and it makes me happy. Was not only the hook to blame, but the gearbox as well? What was wrong with him?

Miranda, Peter Push
Thank you very much for your participation
The service center accepts and gives away lovely girls who only draw up the documents and can see the status of the repair order, the diagnostics are carried out by engineers who cannot be talked to. At first, it was supposed to replace the hook (two weeks if available in a warehouse in Moscow, or 2 months if you had to order in Italy), when I called a week later, the service center employee said that the problem was more serious, the master made an order not only for the hook, but and on the gearbox, while, according to her, there are usually gearboxes in a warehouse in Moscow, as a result, the gearbox was replaced by June 26, and the hook came on Wednesday, but the opportunity to pick up Kesha was only on Sunday, I myself do not drive, but by public transport it is beyond my power to drag him.

Hello girls! They brought me a multi-chopper and a 930 sieve-wiper today.
Happy as an elephant!
Paid 6380 (3190 apiece), delivery is free.
I ordered it for Kenwood. RU

[Marinuly]

Marinuly, Congratulations!!!!!!!!!!!! Super!!! Thanks for the tip, I will also order there, I won't even go to Eldorado to watch)))))))))))))))))))) Is everything complete, as it should be?