Kitchen machine Kenwood (2)

I think my message will not interest those who can order equipment directly from Germany.

The prices I indicated are one third lower than the official representative (kupikenwood dot ru) and are not speculative. I bought in a Russian online store, sell at Russian prices and for Russian rubles. I do not impose my offer on anyone. But I don’t do charity work at this forum either.

If you, Kolich, have the opportunity to go to Germany, then please, grab the Römer Trifix car seat, it is also three times cheaper there, it is very necessary.

P.S. In order not to flood. I no longer comment on my message and answer only on the merits of the proposal I made to people who were really interested.

you have to be an idiot or live in the 6th century BC. e. to think about buying a thing in another country, you have to go for it

you have to be an idiot or live in the 6th century BC. e. to think about buying a thing in another country, you have to go for it

Kolich, you are probably a specialist in online purchases and a very good person, it's a pity that the culture of communication is not enough. Interestingly, in real life you, as a real man, at the first conversation use the word "idiot" in relation to the interlocutor. Yes, worthy of the conduct of a twenty-first century man

Guys, don't swear. I also looked at the prices in the inter. stores, they are not lower than the data. But I can’t order abroad, I don’t know how - and it’s scary to send money (very big for me) to no one knows where. I really need a kitchen. processor to kenwood chief titanium and high-speed, but it turns out more than 8 thousand rubles. while I'm sitting, maybe when they will bring to us

Guys, don't swear. I also looked at the prices in the inter. stores, they are not lower than the data. But I can’t order abroad, I don’t know how - and it’s scary to send money (very big for me) to no one knows where. I really need a kitchen. processor to kenwood chief titanium and high-speed, but it turns out more than 8 thousand rubles. while I'm sitting, maybe when they will bring to us

there is nothing wrong with that, all parcels are insured by the paypal system, if you make a transfer through it, but since we live in the Russian Federation, the easiest way is just it. therefore, if the goods do not arrive (and this may happen, well, we take 1% of the case, since the RF POST does not like these goods, she has a mania for apple products, so they disappear from the parcel in a% ratio of 50k50), then we put the case in the paypal, and all the seller's money immediately freezes for the amount of the purchase, and then it is not your problems that he insured it or not, in a month the reference point for you is the money back on the card, or maybe even earlier it all depends on the paperwork system. there is nothing wrong with that and you certainly don’t send money to your grandfather's village anywhere !! throw out those little houses of the 90s ... we live in the 21st century.

Kolich, I probably stayed at 20m (old). For me, all new terms are like gibberish. There is no card either. The old computer was given away for uselessness, here is a little tyk-myk. Anyway, there is no particularly urgent need, just like everyone wants.

[ALL]

Today I took out all my tips and ran them again for testing.
I can say so. The attachments are good ALL! And I just "got stuck" when I said that there are those that are not very good! It is especially good that everything is included. No need to run and look for something else.
Even those that I supposedly have a defect (blender, ice cream maker), you can pick up keys for them. In a blender, load 2-3 slices of tomato, keep the ice maker in the freezer longer and load fewer ingredients.Yes, and in a meat grinder, use only a large grate, but pass the meat through the meat grinder twice.
By the way, before that I had our Russian Ratep meat grinder (the one with high power), that grind much better than the Kenwood one, even stationary, and it costs very cheap stationary, somewhere like Ken's nozzle.

Lyi, which means I also have a meat grinder with a defect (just not clear which one). All one to one - the old meat grinder (+ vegetable cutter attachment) and the power 3 times less is much better. Do you have an AT 640 attachment? How is she?

[natushka!]

Lyi, which means I also have a meat grinder with a defect (just not clear which one). All one to one - the old meat grinder (+ vegetable cutter attachment) and the power 3 times less is much better. Do you have an AT 640 attachment? How is she?

natushka!
No, you and I have a meat grinder without a defect. Unfortunately, this defect is embedded in the program itself. I have a stationary meat grinder, but it is also suitable for my KM 020. Now I have completely adapted to it and I do not notice this defect. As I wrote earlier, I use only a large grate and, when necessary, I pass it twice through a meat grinder, the minced meat is the same as on a fine grate.
I have the AT640 attachment, I can't say bad words, it's good, but I don't use it often. I grind a small amount of food in the bowl of an immersion blender, the one with knives, and shred using a low (or high) speed shredder. See for yourself what you have in stock and what you want to get. By the way, the bowl in the AT640 is very small.
I see you have a vegetable cutter for the old meat grinder + if there is a submersible blender (you cannot do without this for making lazy mayonnaise), then do you need AT 640. And if there is no submersible blender, then look it might make sense to buy a submersible blender, their cost is practically is the same. Compare
hand blender

Quote: natushka from Today at 16:24
Kolich, I probably stayed at 20m (old). For me, all new terms are like gibberish. There is no card either. The old computer was given away for uselessness, here is a little tyk-myk. Anyway, there is no particularly urgent need, just like everyone wants.

You will get used to everything and study, if there is interest, because of the principle, I don’t buy anything in the Russian Federation, from things, since the quality is zero (only outbid profits), and if the quality is here like Dior things in the USA or Europe (I mean brand-free quality more or less things), but about any technique, you still definitely need to buy over the hill, you get a very large amount .......

[Kolich!]

You will get used to everything and study, if there is interest, because of the principle, I don’t buy anything in the Russian Federation, from things, since the quality is zero (only outbid profits), and if the quality is here like Dior things in the USA or Europe (I mean brand-free quality more or less things), but about any technique, you still definitely need to buy over the hill, you get a very large amount .......

Kolich!
Well, now we will know who to contact for help if something lights up to buy on foreign sites. I have a problem with this too.
For a very long time I licked my lips on a 3.5-liter slow cooker on e-bey, I even bought a "Kukuruza" card and put money on it. But, in the end, Victoria helped out, who bought it for me in Ukraine, and now I'm waiting, she should come.
Now, please, everyone.
Perhaps someone has such a metal grate for cutting meat in a meat grinder into pieces. They used to be ubiquitous. Just be sure to try on the Kenwood meat grinder, as it is of non-standard sizes

🔗Buy expensive.

[Lyi,]

I have the AT640 attachment, I can't say bad words, it's good, but I don't use it often. I grind a small amount of food in the bowl of an immersion blender, the one with knives, and shred using a low (or high) speed shredder.

Lyi, can you advise on low and high speed shredding, please. Is it worth buying both or one is enough. Which one is the best for shredding cabbage? The speed of processing is not important, the more important is the quality of cutting and ease of use (assemble, disassemble, wash)), as well as in which of them the loading window is wider. Please wait for an answer.I already asked this question in the topic of attachments, but it was ignored, or maybe no one has both.

Wider throat in low speed, but I did not cut cabbage in it. Disassemble and wash in the same way. Shinny cabbage in high speed when needed for pickling. And a little bit - you can use a knife.

Wider throat in low speed, but I did not cut cabbage in it. Disassemble and wash in the same way. Shinny cabbage in high speed when needed for pickling. And a little bit - you can use a knife.

Thank you! The wide neck attracts .. it is a pity that we did not try cabbage in it .. And why do you usually use low-speed? Does she cut vegetables normally?

For chocolate and hard cheese. That is, for products that are difficult to rub.

Understood, which means that high-speed is better for vegetables

[Lyi,]

Lyi, can you advise on low and high speed shredding, please. Is it worth buying both or one is enough. Which one is the best for shredding cabbage? The speed of processing is not important, the more important is the quality of cutting and ease of use (assemble, disassemble, wash)), as well as in which of them the loading window is wider. Please wait for an answer. I already asked this question in the topic of attachments, but it was ignored, and maybe no one has both.

Deep!
In my opinion, the loading window for both shredders is the same. One is just a square, the second is an elongated oval. See for yourself
🔗
🔗
🔗
I use both attachments: low-speed when cooking every day (borsch, salads), it is easier to wash, put clean. High speed on workpieces. But, yes, they repeat each other even in terms of output patterns.
If you take a high-speed one, take the AT340. When I bought, there was also some old model with a narrow neck.

girls who use citrus press? no one has come across the fact that the centrifuge begins to unfold out of the nest, that is, for a while everything was okay, but now it has become impossible, you press the spit with a half of an orange, you look, the plate has gone to unfold, turned around and continues to spin as usual (but already it is not in the nest fixed and in this regard, vibration is obtained) .....

[Lyi]

Lyi!!!
Thank you very much! Now I can see everything, finally)
Now I want low speed again!
Lyi, but tell me more please your processor is in demand? What are you using it for? Well, I think so, if salads-borschik are in low-growth, then what is in the processor?

[Lyi]

Lyi!!!
Thank you very much! Now I can see everything, finally)
Now I want low speed again!
Lyi, but tell me more please your processor is in demand? What are you using it for? Well, I think so, if salads-borschik are in low-growth, then what is in the processor?

Deep!
Low-speed, simpler, almost eternal (metal), but minus slow, it is bad to make workpieces on it.
High-speed-zip, zip, take away the ready-made, very easy and quick to make blanks.
Do you mean the processor AT640 combine? If yes, then read the answer in my post 1227 of 08/12/2012. That is, I practically do not use it, although there are no complaints about it.

Girls, I have 10, the meat grinder is excellent. Moreover, there is something to compare. Separate there is Kenwood. Only there is no reverse in Cash. Yes, as in the store on the tray will not be, separate worms. I am lazy, I cut large pieces, and I don't cut the veins too much. As for the cabbage, it's more convenient to use a special grater. T .. to. You will have to cut it into pieces beforehand to stuff it into the neck. I bought myself a high-speed one. Very quick to assemble, easy to clean. As for the processor, I would buy a separate blender. The money is the same, there are more functions (I already have it, from my own experience I speak)

Deep!
Do you mean the processor AT640 combine? If yes, then read the answer in my post 1227 of 08/12/2012. That is, I practically do not use it, although there are no complaints about it.

I'm sorry! I read and even quoted! It is clear that AT640 is good, but in the presence of low- and high-speed graters, it is not in demand.

Girls, looked about blenders (for comparison with the AT 640 attachment and its price), but did not find them to perform the function of the grater that is in the Kenwood attachment. Or I'm dull. Here again to you.

[Natushka]

Girls, looked about blenders (for comparison with the AT 640 attachment and its price), but did not find them to perform the function of the grater that is in the Kenwood attachment. Or I'm dull. Here again to you.

Natushka, in post 1226 you wrote that you have an old meat grinder with an excellent VEGETABLE CUTTER (grater) attachment.
Therefore, I suggested that you use an old vegetable cutter instead of AT640, since it is good, and buy a blender.

Yes, I wanted to give this meat grinder, there is no place to put it (kitchen 2x2.3) there is a bread maker, a combine, and the multicooker is already on the table - it is very inconvenient, but pulling it out (meat grinder) and putting it on the mezzanine.

[Natushka]

Yes, I wanted to give this meat grinder, there is no place to put it (kitchen 2x2.3) there is a bread maker, a combine, and the multicooker is already on the table - it is very inconvenient, but pulling it out (meat grinder) and putting it on the mezzanine.

Yeah,Natushka, you did it ill-considered. You already had a good meat grinder and vegetable cutter, but for some reason you bought a meat grinder one of the first attachments and again want a vegetable cutter (AT640).
Maybe it's not too late to return the meat grinder attachment back, and instead buy a dough sheeter, leaving the old meat grinder and vegetable cutter? This is my all-time favorite. Maybe because I really like dumplings? Or any other attachment that you don't have?
But don't be discouraged if you have all the attachments - it's not bad at all.

The meat grinder was included, you will not hand over)). I don’t want a dough rolling machine - I don’t do much, I’ll roll it out with my hands, dear. I want a high-speed one, and AT640 for small volumes of salads. Here is the problem with the attachments - they do not import, there is also an extra overpayment via the Internet - it is hard to retire.
And you want less space and more functions.

turned out to be an extra meat grinder, which is included with the combine? And what about the "flea market"? Even though it is used, but this is iron, nothing will be done to it. Try to sell at two-thirds of the price.

The meat grinder was included, you will not hand over)). I don’t want a dough rolling machine - I don’t do much, I’ll roll it out with my hands, dear. I want a high-speed one, and AT640 for small volumes of salads. Here is the problem with the attachments - they do not import, there is also an extra overpayment via the Internet - it is hard to retire.
And you want less space and more functions.

Natal is taking a coffee machine with a Delonghi Esam 6900 seal, at the same time I can throw the AT640 into this package and already upon my stay I can send you your attachment by the transport company.

AT640 and upon arrival I can send you your attachment by the transport company.
Thank you, I'd love to. Just a question - How much will it cost? Not cloudy? Isn't there AT340 (high-speed)? Oh, sorry, it seems to be impudent, heavy and voluminous.

[Kolich]

Kolich
And I would not mind ...

then you need to find out what you want first))))) just do it very quickly, because on the next week she will go to me already, now we are just waiting for a spare part (nest) for my Kesha, otherwise she got smashed .... (( (and the nozzle from the citrus juicer turns over for me.

AT640 and upon arrival I can send you your attachment by the transport company.
Thank you, I'd love to. Just a question - How much will it cost? Not cloudy? Isn't there AT340 (high-speed)? Oh, sorry, it seems to be impudent, heavy and voluminous.

no, it's not sky-high, for sure and cheaper than our local hucksters, just decide what you want)) and do not hesitate, write on what you need to find out the prices ...

no, it's not sky-high, for sure and cheaper than our local hucksters, just decide what you want)) and do not hesitate, write on what you need to find out the prices ...

Yes, I want both. So - what will happen. I saw prices in online stores: АТ640 - from 2000 to 2500 rubles. AT340- 3200-5000 rub. the range of prices is quite large, and which of them to believe

Yes, I want both. So - what will happen.I saw prices in online stores: АТ640 - from 2000 to 2500 rubles. AT340- 3200-5000 rub. the range of prices is quite large, and which of them to believe

Well, yes, across the Russian Federation, I found prices of 2500 at640 and at340 4000 ...
it remains only to find out in Germany how much they will cost and how much delivery will be released ...

Well. Kolich, and approximately how much will be delivered from you, maybe you know? I am a complete layman.

[Kolich]

Kolich Thank you!
We talked with a natushka, but I did not know that this attachment did not fit me, there are only 3 nests in my car.
The model of my Premier Major KMM760 car.

Nobody has got it yet
Kenwood Dice Cutter MGX400?

Well. Kolich, and approximately how much will be delivered from you, maybe you know? I am a complete layman.

the burgers are out now, so the answer will be accurate on Monday

[Kolich]

Kolich Thank you!
We talked with a natushka, but I did not know that this attachment did not fit me, there are only 3 nests in my car.
The model of my Premier Major KMM760 car.

that is, alas, will not work? ((((

Nobody has got it yet
Kenwood Dice Cutter MGX400?

useless, it will appear only probably closer to the end-middle of autumn, and then only in our countries of "ASIA" and as I understand it will not be anywhere else ...

Yesterday we were in Mediamart, we were told that the nozzles for cutting into cubes will appear in a month and a half. We live in Omsk.

probably about them ... although I did not ask the name of the new nozzle. Wait and see.

In general, things are like this, my friend in burgerstan does not have such attachments in stock, but you can order them from another Internet store, together with delivery by mail it will cost 7050 rubles two attachments
AT340
AT640

Finally mastered the forum As a result, I settled on Kenwood KM 070.
Somewhere deep inside I understand that induction heating is most likely overkill, but I can't do anything with myself - I want this particular model. It's like Ferrari among Mercedes :))
The only thing that is somewhat confusing is the size of the device (I don't have as much space as I would like it to be, especially above the car). We will of course think about what can be done, but Kenwood KM010 would be more suitable for me. But many on the forum noted that in some moments when kneading the dough, the bowl is just a little missing. Therefore, I decided to "play it safe" for the future and take the "older" model. Well, here I couldn't take my eyes off the beauty of 070 :)
We plan to be in transit for 2-3 hours in Kiev and have time to buy this miracle. The prices there seem to be adequate.

However, many questions immediately arose:
1. Do I understand correctly that all attachments (in the bowl nest and not only) from the 020 (023) model are suitable for the 070? It seemed to me that in the pictures the 070 has a slightly different bowl. Will the AT 445 (potato peeler) work?
2. Immediately I decided for myself that I needed a second bowl. There are various options for sale on English-language sites (with and without pens for the Major). Somewhere in Russia, and in particular in Moscow, can you buy an additional bowl? And do you think the bowl from Major will fit the 070 model (will be used only for dough, cream and other things without induction)?
3. And yet I did not fully understand which high-speed cutting is better than AT998A2 or AT340? Of course, dranniki are interested, everything for sauerkraut and julienne. The latter seems to be more modern and takes up less space. But if there is an AT640 processor with 3 disks in the package, how relevant are these shredders? And where in Moscow can you buy disks for AT640 (dranniki)?
4. What is the size of the freezer bowl for the Major ice maker? Height, diameter? Will it take up a lot of space in the freezer?

A potato peeler will do and many others will do.

Marihuna
It is not so easy to buy KM 070 in Kiev in 2-3 hours. You need to know in advance where it is. Personally, I have not seen him alive, I suspect that it may be on Petrovka in the Megamarket, there is the largest selection but also prices .... It's another matter on the Internet. You can find an online store that has self-pickup, order in advance. Then already and come directly to them at the address (payment on the spot)

TaTa, we do so - we book in advance at a point convenient for us on the route. Like 100% promised that the machine will be.
I have never seen the device itself, only in beautiful pictures.
I just proceed from the fact that the price in Moscow is comparable to the complete (juicer, meat grinder, AT 640 and blender) KM010. Of those nozzles, by and large I would need a meat grinder (the rest would still be bought). And since the difference in price is very scanty, and the KM 070 is a head and a head, hence the decision to buy the latter. The funny thing is that a complete KM023 costs 5-6 thousand rubles more than a KM 070, which I don't understand at all, since the difference is the price of just 2 nozzles, especially since the AT 640 is already included in the 070.

Could it be that counterfeits are being sold in Ukraine? Because 070 comes from Germany for at least 45 thousand. This is what it turns out - Ukraine is ahead of the rest of the world at prices or what?

Ahhh ... Well, then, you're doing the right thing. I don't think these are fakes, rather contraband

Tovarischi, dear ones help with advice !!!
Today I tried to find out where else I can book this Kenwood KM 070 machine in Kiev and here I got this answer "... Regarding Kenwood KM 070: the buyer's answer: this is not a new product - this is an outdated model, they will no longer be available. A new line has been released. ... ".
What is the result - some sellers just sell the leftovers at slightly reduced prices? And what happened in return? Lord, we did not even see this miracle in our eyes, but it was already removed from production: ((((
And what to do now - I do not know - to buy, not to buy. It seems to be tuned in already, but I don't want to take an outdated model. Well, I don't want to. Moreover, in Moscow, if something is not accepted in the service, such a model is not certified in Russia.
In short, one disorder. What is this my gift for DR turns out with a "rancid" aftertaste or something :( "
+ received a weirdest message today from a service center where I was unsuccessfully trying to find an extra bowl for Cooking Chef KM070. Well, to my request - are the bowls suitable from Major to 070 I received the answer literally "... Such a bowl is suitable only for Major, but it will not be in height for you on Chef!
And I did not find a suitable one for Chef ... "
How can this be? The bowls are the same in volume for both !!! So the attachments (AT 445 potato peeler and AT 957 ice maker) will not work either? And I have already ordered the very same attachments for the Major ((((. It can't be that they don't fit: (((Maybe in the service center something was confused? Maybe with the 010 model?) For the alleged purchase of Cooking Chef KM070

Kolich, how are you? Does everything fit?
And maybe, thanks to your connections in Germany, you can find out what all these restless Kenwoods have released instead of the 070 model? This unprecedented miracle is already on sale somewhere?

In general, I am in some confusion and confusion ... Take - do not take ... Time - only a week to think. On the other hand, while the husband is ready to sponsor this "gift", can he just forget about everything and just enjoy the purchase?

I found that KM 084 and 086 seem to have come to replace: (I wonder how much they cost?

She reassured herself :)) Judging by the presentation of 089 - well, no differences, at least outwardly, but what's inside? Nobody knows, and I don't want to know

The only problem is the attachments - in the rollers, well, nowhere have I seen ice cream made in such machines or peeled potatoes: (Maybe they really don't fit?