Kitchen machine Kenwood (2)

I read somewhere about tm. that a person, purchasing Kesha for himself, acquires a mania for buying attachments
Here I sit and search ...

Make a risotto, simple and delicious. I even saw a video recipe in the cache on YouTube

I read somewhere about tm. that a person, purchasing Kesha for himself, acquires a mania for buying attachments
Here I sit and search ...

and I already, frightened that the computeruniverse would stop shipping to Russia, paid for the contents of the basket
There I had two rolls for the dough (970 and for tagliolini), At512 and a high-speed slicer. But I have 84th cache, so the slicer is the right thing for me.

And why did they such scoundrels stop making deliveries to Russia?

wrote that this is some kind of error, so I just opened my basket, everything is fine, there is delivery.

Girls, as I understand it, scratches still appear on Kesha's coating over time, since the glands rub against the glands, they bump ..
On such scratches, then the paint will not peel further, does it show itself in any way? Or will it be necessary to do something about it?

Girls, could you post a photo of the original warranty card for Kesha, so that when buying, you could check that this is really an official guarantee and a white delivery! Respond who has!

Must have DeLongy guarantee with country-wide addresses and seller's stamp

Thank you Olga!

I understand that scratches still appear on Kesha's coating over time,

Mine is almost 2 years old. I use it regularly. Not a single scratch ... I can't even imagine where they can appear on the case ...
Well, in the nests, yes ... There are stripes. But these are not scratches. And you can't see it from the outside, since the specials are closed. fuse plates ...

[Natalia]

Natalia, and the place where the bowl is inserted (with induction) - after all, you insert the bowl and turn it so that it stalls on the protruding clamps, constant friction is obtained of the metal on the coating?

[Violin]

Violin,
no. There is no friction there. The bowl is inserted into the grooves ... It does not touch the body too much.
There is a gap. Induction is from below, not from the sides ...
Why a snug fit?
Even along the bottom of the groove where the bowl is inserted, there are no stripes ... There are small ones in the nest for the combine ... but the paint is all in place. Not on appearance, nor on speed ... practically new! Here you cannot find fault with the quality!

[Natalia]

Natalia, I realized thanks!

[Olga]

Olga, I made your porridge today in Kesh - everything turned out to be lumps, stuck to the bottom - I took it according to the recipe, only semolina 90g, not 100 ...
What did I do wrong?

Svetlana, it is difficult for me to answer why you did not succeed, since it is not clear how exactly you did it.
Let's try to figure it out, just let's go to do it directly into the topic of the recipe itself.

[Olga]

Olga, yes, of course, something I didn't immediately think ..

Here's a plan:

Only mine is even thinner and without a slot.
I bought it at FixPrise, there are 2 or 3 pieces. included, I don't remember.

And they brought me such 2 pieces as a gift along with Keshka. I usually cut dough for bread in butter on them, it's very convenient.

and I already, frightened that the computeruniverse would stop shipping to Russia, paid for the contents of the basket
There I had two rolls for dough (970 and for tagliolini), At512 and a high-speed grater-slicer

Marina, I also want to buy Kesha and some nozzles in this store. Have you already bought there? You can contact you for advice. This will be my first experience of ordering from a download. shops.

[panarino]

panarino, they do not send the cache to Russia. or are you not in Russia?

Marina, I looked carefully, there is no delivery to Russia for some models, but what I need, like order, and you will be happy. I checked in, filled the basket and everywhere the green light is on. No refusals are written anywhere.

[panarino]

panarino, great then, throw it into the basket, and then everything is like in a regular online store, the delivery address, then the card data.
I myself ordered there for the first time, so I'll see how quickly the order arrives before the New Year.

deliver everything that weighs less than 20 kg (the maximum total weight of the parcel) - although in fact they came to me heavier than stated on the website

Tell me, have you introduced a price threshold for parcels from abroad yet? I heard they wanted to make up to 250 euros

Girls - on a nozzle-cube for 999r. We don't have it in the city, but it is in Surgut and Kurgan. But if any of you (those who need one) have friends / relatives in these cities, they can order it for you.

Girls, if my coveted Kesha brand goes under the order (waiting period 3-4 weeks), and everything else is in stock), Will they dismember the order or send everything together when the time of the combine itself comes up?

[panarino]

panarino, I think they will agree on this with you.

It remains to find someone in Surgut.

[Katerina]

Katerina, can you look in the branch "Bakers, unite" in Surgut or Kurgan of one of the girls?

I made a biscuit and made a custard, it turned out just amazing. Kesha rules!
Svetlana, I think, by analogy with custard and semolina porridge is cooked. I first mixed all the ingredients with a whisk, then I dressed St. gray nozzle and turned on 100 degrees, speed 1. A homogeneous consistency turned out. When the cream has cooled down a little, I add soft butter and mix with a whisk.

Kesha tried with the staff))))

Marina, you could do everything at once with the same attachment.
For example, for a custard I take one of 3 - the one that just comes to hand first or is simply more expedient: K-shku, Flexible or a whisk.
And for porridge, and for some other purposes, I even beat the whites. And then I mix in butter, flour, and so on.
Especially K-shka is universal in this sense. And it is convenient to clean it, nothing gets stuck in it, like in a whisk. I only switch the speed and temperature back and forth.
The result is always the same. So there is no point in getting all the attachments dirty in one go.
IMHO

[Olga]

Olga, you probably answered Marina?

Olga, the goal was to test all the attachments in action, and I liked it very much!
I'll try next. just make everything K-shkoy)))))

I read and read 170 pages and now I decided to write. Maybe someone will come in handy.
Long tossed between Kenwood and the Kitchens. And at first she wanted the most powerful ones. And 2 weeks ago we went to Auchan (we do not live in Russia) and saw Kenwood KMC570 at a discount. I told my husband that I probably want this one after all. And he took it right away and bought it.
At first I began to worry, that's not powerful, everyone here has 1400 watts, but the volume of the bowl is small, there is no one socket, but it will be vital to me, and so on, and so on.
BUT NO! Girls, if someone's finances do not allow, do not suffer, BOLD BUY such a car. If I asked, my husband would buy an expensive one, but why?
I kneaded the dough on dumplings great, though I did it in a glass of water, but we don't need it anymore. For the fruit pie, the pastry is gorgeous! I still look at him as if enchanted.
A 4.6L bowl for a family of 2 adults and a small child, plus guests, is enough. Personally, I don't need more. Even when the son grows up it will be enough. If I always baked 2 pies at a time, kneading the dough with my hands, because the bowl is 6 liters, I still won't bake anymore.
I don't need a socket for a food processor, I will buy another high-speed grater and that's it. In the kit we have a glass blender and a meat grinder. The meat grinder grinds in the same way as the old stationary (by the way, also Kenwood), only quieter. I did not notice any difference in grinding speed. But the glass blender, I still do not understand what I can use.I grind soups with immersion and pour them into a glass, and then I don't see the point back.
In general, ideally, in my opinion, it was necessary to buy a bare CM and then buy only a meat grinder and a high-speed grater. But this is my personal opinion, which is based on my personal needs.
P.S. Yeast dough for 2 pies, in my performance it is 1.5-2 cups of liquid, after kneading it takes a little less than half the volume of the bowl. But I have not yet whipped the proteins, which, as they say, jump out of the bowl. Check))

Tell me, pliz, what is better to buy, otherwise I study for 2 full days and get completely confused.
If 010 and 020 - the difference in price is only $ 50. (020 is more expensive naturally) - embarrassed that 020 is too big
084 is more expensive than 010 by 200 dollars. - Is the induction of an overpayment of $ 200 worth?

[tarinatania]

If 010 and 020 - the difference in price is only $ 50.

tarinatania, 010 are naked, and sometimes with attachments - the price is different, depending on the configuration.

(020 is more expensive naturally) - embarrasses that 020 is too big

Tatyana, it does not look big at all, in a bowl of 6.7 liters, a useful volume of 3 liters

084 is more expensive than 010 by 200 dollars. - Is the induction of an overpayment of $ 200 worth?

And here it depends on what you plan to do on it - to cook. For example, I have never met induction anywhere, I decided for myself - that this is something new for me, yet unknown, expanding the horizons of my culinary and culinary activity - why not try it, since the price turned up good. IMHO.

010 and 020 - I look at naked, I will pick up the nozzles myself
020 costs $ 50. dear 010 - both naked
probably worth taking 020?

[tarinatania]

tarinatania, under such conditions, this is the most profitable option, because not only the size of the bowl is larger, but also + 100W to the engine power.As one of the girls told me rightly that you can put a smaller volume in a larger bowl, and not in a smaller one. $ 50 in this difference is very little.

084 is more expensive than 010 by 200 dollars. - Is the induction of an overpayment of $ 200 worth?

Definitely yes !!! We have this overpayment of at least $ 500!

Definitely yes !!! We have this overpayment of at least $ 500!

I join the rave reviews, induction made cooking a lot easier for me!)

I join the rave reviews, induction made cooking a lot easier for me!)

I just can't put everything together
Where does induction help so much?
custard cream - I do it once a year
in steamer mode - does the steam come out strongly? do you need to put under the hood?
yogurt probably won't work in it if the temperature jumps?

If you can, list a few types of work that induction greatly simplifies
I have already ordered the 020 model, and the induction for $ 150. it turns out more expensive. Now it's all in doubt if I need induction
Before the morning you need to make a decision.

1.Steaming - or is it better in a double boiler?
2. yoghurts - possible?
3. spaghetti is there to boil it, stirring at the same time? isn't it very long? or easier on the stove
4.do not make yeast bread
5.If you fry in it, does it smoke a lot? do you need to put under the hood?

Well, today, before going to school for my daughter, I managed to knead and bake a biscuit, made a custard.
Upon arrival, I quickly made cherry jam with jelfix (a layer for the cake).
And I didn't have to stand at the stove and interfere, everything was done by Kesha and Shteba.

If you rarely bake, use a simple food processor.

[Tatyana]

Tatyana, In the cache, induction is convenient for those recipes where constant stirring is required: sauces, dough for eclairs, custard, etc. I also often make risotto.

[tarinatania]

tarinatania, in my opinion induction is not a mandatory option at all. Having Kesha with induction, I do not often use it. Well, somehow I like cooking on the stove more. And this is despite the presence of a multicooker and other equipment.
As for the steamer, the bowl is quite small, there is very little you can do, but it will be too small for a large family. I make steam cutlets or pumpkin for a child. The bowl is closed with special protective covers and not much steam comes out into the kitchen, which is a plus. I think there is no point in cooking spaghetti. Although possible, of course. You can not put any stirrer, then the sound will be, but in fact will not interfere. I think yogurt is possible, but in my opinion it is not very convenient. When frying, it does not smoke much, again there are protective covers.

Hello girls! Yesterday I tried to make mashed potatoes, whipped with a K-shaped nozzle.For some reason, I still have lumps. I had to bring it to the required condition manually. Can someone share a secret of what I was doing wrong?

[polisher]

polisher, try not whole potatoes, chop a little into pieces and beat with a whisk with butter and hot milk. Do not beat for a long time, so as not to get a paste.

[ZEElena]

ZEElena, Thank you. I'll try this. That's why I chose the K-shaped one, because I was afraid to get paste.

and it is better not with a whisk, but with a nozzle for soft mixtures, the one with a rubber pad on the sides, and then you can throw the whole potatoes.

[Kara]

Kara, Need to try! So I thought that I probably chose the wrong nozzle. And choose the maximum speed?

Not necessarily, at 2-3 speeds everything will work out fine. If you beat at high speed and / or with a whisk, you get a floating puree, watery, even if you add neither milk nor potato broth. Mine don't like that.