once
Power blender PB1550HTD / RD


The powerful PB1550HTD High Speed ​​Blender will take its rightful place in your kitchen. Thanks to the 1300 W motor and 6 sharp stainless steel knives, located at a certain angle, chopping occurs at a speed of 30,000 rpm and as a result ready meals: mousses, purees, sauces, cocktails retain more nutrients. The 2 liter jug ​​is made of modern and durable material - triban. The blender has 5 preset programs: smoothie, jam, ice crusher, turbo and heating.



Oursson PB1550HTD blender specifications

Power consumption, W 1300
Volume, l 2
Measuring cup, piece 1
Chopping knives 6
Operating mode indication Yes
Rotation power adjustment Yes
Stirring Yes
Shredding Yes
Turbo or Pulse Yes
Ice crushing Yes
Smoothie preparation Yes
Product height, mm 267
Product width, mm 231
Product depth, mm 190
Product weight, kg 2.9

Equipment

Measuring cup 1 pc.
Cover 1 pc.
O-ring 1 pc.
Blender jar 1 pc.
Pusher 1 pc.
Knife block 1 pc.
Electric motor unit 1 pc.
Operation manual 1 pc.
Warranty card 1 pc.



Oursson PB1550HTD blender device

Oursson PB1550HTD. Powerful high speed blender

1. Measuring glass
2. Cover
3. O-ring
4. Blender jar
5. Knife block
6. Device case
7. Control panel

Description of blender Oursson PB1550HTD



Before using for the first time, do one cooking cycle in idle mode, pour water into the blender jar. Then wipe the body of the device with a dry and soft cloth. Wash the jug, lid, pusher, measuring cup and stainless steel knives with warm water and some dishwashing liquid.

Before assembling or disassembling the device and / or disconnecting the attachments, make sure that the device is unplugged.



Operating procedure:

1. Plug the appliance into a power outlet. Move the ON / OFF button to the "I" position. The indication of all buttons and display on the control panel will light up, a beep will sound, then the device will switch

into standby mode. To exit the standby mode, lightly press the START / STOP button, the indication of all buttons and the display will light up.

2. In standby mode, place the jug on the motor unit as described.

3. Add prepared ingredients to the bowl. Do not fill the jug above the MAX mark. Place the lid on the jug.

NOTE: Ingredients should not exceed 2/3 of the jug.

4. Select one of the preset modes and press START / STOP once.

5. You can set your own parameters for rotation speed and running time. In standby mode, press the button, use the rotary switch to set the desired rotation speed, press the button again. Repeat steps to set run time. Press START / STOP once. The mixing / grinding process will start automatically. Press START / STOP again once to shut down the blender.

Note: If ingredients stick to the sides of the jug during chopping / mixing, use the pusher. The pusher can be used to stir ingredients during chopping / mixing. Do not use a stirring stick for more than 30 seconds.

6. Detach the blender jar from the appliance body as described. You can open the jug lid after the jug is removed from the motor unit.

7. Turn the switch on the bottom of the instrument case to the OFF position. Unplug the device from the socket. Then you can disassemble the device.



The device is equipped with overload and overheating protection. If overload or overheating occurs, the device will automatically stop. Unplug the device from the socket. Let the appliance cool down for 45 minutes. Then you can continue using the device.
When grinding hard ingredients, do not use the appliance for more than 1 minute. Let the appliance cool down for at least 5 minutes.
The maximum permissible time of continuous use of the device should not exceed 2 minutes. After that, the blender should be turned off and allowed to cool for at least 3 minutes. Do not use the appliance without water or ingredients.



Cooking recommendations

It is recommended to cut the ingredients into pieces no larger than 2x2x2 cm before cooking. The maximum amount of ingredients is shown in the table for reference purposes. Follow the directions in the recipe book.



Cleaning and maintenance
Wash the jug, lid, pusher, measuring cup and stainless steel knives with warm water and some dishwashing liquid.

Wipe the body of the instrument with a damp cloth. Never immerse it in water because of the danger of electric shock.

Dry all parts thoroughly.















All recipes

© Mcooker: Best Recipes.

map of site

We advise you to read:

Selection and operation of bread makers