Wildebeest
Quote: Wildebeest
By the way, I began to roll out the dough for pies in a flower with a round stick-rolling pin. I'll show you tomorrow.
And here is my promised stick-rolling pin, its length is 25 cm, diameter is 2-2.5 cm, it is very convenient for me to work with it.

🔗
Helen
Quote: Wildebeest

And here is my promised stick-rolling pin, its length is 25 cm, diameter is 2-2.5 cm, it is very convenient for me to work with it.

Molds for making balls from meat (meatballs, meatballs, etc.)
and where did you buy it?
Wildebeest
Helen3097, Lena, I didn’t buy this one, but I left it from something. I can't even remember what it was before. I have a disease - to leave round sticks. And now it came in handy for me.
In principle, you can buy a mop stick and saw off the desired length, there is a suitable diameter.


Added Thursday, 31 March 2016 10:11 AM

Girls, now I went to Ali and saw the painfully familiar stick-rolling pin, but the price swelled



It is only 3 cm longer than mine.
I went to measure my stick from the mop - 97 cm, it is enough for three such rolling pins.


Added Thursday, 31 March 2016 4:51 pm

Today I went to our hardware store, there is a mop stick for only 140 rubles.
galchonok
Finally, I got my shape with Ali and decided to cook the simplest balls in it in order to understand the principle of how much to put in the molds, how much and how to lubricate them so that it is easier to take out. Before the preparation itself, I asked my husband to drill holes on the bottoms of large cells - thanks to Irina Irsha for the advice! In the end, I liked it! I will experiment further, including sweet and snack options.
That's what I did

Chicken-rice-cheese balls with mozzarella (in a mold for making balls) (galchonok)

Molds for making balls from meat (meatballs, meatballs, etc.)
prubul
galchonok thanks for the recipe, how beautiful, they are so tender !!
Selection of recipes
page 42 Vesta potato, meat (no recipe)
page 52 NataST cake potatoes (description page 53)
p. 52 Helen3097 crab sticks with red caviar (no recipe)
p. 56 Reina chicken breast with cheese and fenugreek (no recipe)
page 57 gala10 Hedgehogs with a secret (there is a recipe)
p. 62 MariV Cheese balls with potatoes (there is a recipe)
page 67 Marina22 Filled potato balls video
p. 70 Premier curd cheese with herring and Borodino bread
p. 70 kykysik1107 potato with herring
p. 70 kykysik1107 curd-cheese-egg-crab in a sprinkle of paprika. dill
p. 71 kykysik1107 fruit icecream
p. 72 Rada-dms Curd balls with tasty and healthy fillings (there is a recipe)
p. 72 julia007 Branded meatballs of three types of meat (there is a recipe)
p. 73 MariV falafel
p. 74 Mandraik Ludmila Lenten sweets: Halva (recipe available)
] P.74 MiLizard Scottish eggs (dietary) (recipe is)
p. 76 galchonok Chicken-rice-cheese balls with mozzarella (recipe is)
If you missed anyone, I'm sorry, write me
galchonok
Elena,! I liked the form very much!
Marina22
And yesterday my husband drilled holes on the large halves of the molds. We will continue to experiment
prubul
Happy holidays to all! The post ends, we are waiting for new creations in our form !!!
Molds for making balls from meat (meatballs, meatballs, etc.)
mirtatvik
Quote: Vesta

It seems that everything was noted by who is taking whose.
Potato balls with Almete cheese
Molds for making balls from meat (meatballs, meatballs, etc.)
Molds for making balls from meat (meatballs, meatballs, etc.)
meat with cheese
Molds for making balls from meat (meatballs, meatballs, etc.)
Molds for making balls from meat (meatballs, meatballs, etc.)
dinner-I ate
Molds for making balls from meat (meatballs, meatballs, etc.)

For some reason, the meat products turned out worst of all - from the halves they jump out perfectly, but do not stick together
I read somewhere on the Internet (the same form was discussed) that you need to add a little vodka to the minced meat, then everything will mold well. I don't know how true this is.


Added Friday 03 Jun 2016 02:49 PM

Quote: NataST

Potato cake !!!
Molds for making balls from meat (meatballs, meatballs, etc.)
Molds for making balls from meat (meatballs, meatballs, etc.)
Very nice! Are they inside with a surprise?


Added Friday 03 Jun 2016 03:18 PM

Quote: Irsha

and why then this adapt ...
no-it is necessary to achieve handless formation, otherwise money is down the drain
I don't want to stain my hands with minced meat, you can roll neat balls and hands, and even faster
that's what I thought - it is necessary drill holes in halvesso that there is no sticking of minced meat

meatballs with holes

Molds for making balls from meat (meatballs, meatballs, etc.)

here's a job for my husband again - a drill in his hands
Idea for those who do not have a meatball mold. Take the meatball machine (as in the photo above) and fill both halves with minced meat.
We squeeze the holes with a bottle of iodine (I checked it, everything fits), fill it with a filling, stick it together, slightly remove the excess minced meat. Let's start making a new meatball.
Olekma
Quote: galchonok
Finally got my form with Ali
And please give a link to Ali, to this form.
prubul
Quote: Olekma
And please give a link to Ali, to this form.


it's on Ali
DJ
Girls, on which side of the form, the top half or the bottom, do you need to make a hole, and what diameter?
galchonok
Larissa, on my molds there are 4 mm holes on large balls, that is, on those that do not make a depression
Molds for making balls from meat (meatballs, meatballs, etc.)
Natalia K.
Girls who want triple cutlet girls. They appeared right here, at a good price.

🔗


Yes, a lot of interesting things have appeared there ...
natushka
Natalia K., but the store is reliable? I wanted to see Delivery and payment - does not open.
Natalia K.
natushka, in this store, girls ordered forms for balls. Read the topic.
Jiri
Quote: Natalia K.
Girls who want triple cutlet girls. They appeared right here, at a good price.
I want to! But after all, there you need to collect an order of 10 pieces, you can have different products, who else wants?
IvaNova
Jiri, I want to. But you need to calculate how much will come out with delivery and count. Yes, think)))
E.V.A.75
Quote: Helen

and where did you buy it?
Usually they put this in raviolnitsa
akkkula
Who in St. Petersburg to give a mold for a chocolate?
Veronica
Quote: Wildebeest

Girls, why are you so worried about the size of the mold?
In general, lately I have been drawn to everything small: I bought the little ones of multicooker, began to sculpt small pies for 2-3 bites
Molds for making balls from meat (meatballs, meatballs, etc.)
with the help of such a device
Molds for making balls from meat (meatballs, meatballs, etc.)
Girls!! Tell me what this mold is called, and where you can order it !!!! I already dream of her !!!
Repeat
Veronica, this form was discussed in "Kitchen Trivia" a few months ago. On mine it says "Form for making khinkali". Naturally made in China. Only here I can not give a link, unfortunately. I bought in local city joint purchases, paid very little.
Helen
Veronica,
Veronica
Thank you very much! Thanks to Helen, found and ordered on Ali ... now you need to look for reviews here, how to use it ...)))
Ava11
Hi to all amateurs !!! I have such a thing! Can anyone tell me if it is possible to make balls with filling in it. Meat turned out very quickly 16 pieces.
Molds for making balls from meat (meatballs, meatballs, etc.)
Antonovka
Veronica,
Catch the link to the form

Ava11
Antonovka, Lena, Thank you!
Svetlenki
Meatball lovers, but not meatball lovers! ATTENTION!!! Look what I found!

English name "Sushi Balls, Xshuai® Rice Ball Molds Sushi Balls Maker Mold Spoon Kitchen Cooking Utensil Tools Set"



Video how to use under the spoiler



Miranda
Svetlenkiwhat a funny thing!
How many in the world adapt
Kara
Quote: Svetlenki
Video how to use under the spoiler
So I'll cook meatballs for half a day
Svetlenki
Quote: Kara
So I'll cook meatballs for half a day

Well, yes, they would have made 5 pieces ... But there the diameter for the soup is larger ... It's still meat balls a la meatballs, when there are 5-6 pieces per serving
Quote: Miranda
what a funny thing!
How many in the world adapt

Yes, the Chinese are thinking in the right direction - let them invent the perfect ball rolling machine for meatballs
To love
Ava11, Alla, I have such a thing, I bought it in the store in the Top shop department
🔗
Type in search: Form for cooking meatballs with filling
I use such a mold and make potato and rice balls for garnish)
eta-007
Admin, Tanya! If someone has already compared these two devices, please delete this message.

So, Ladies, I bought two such molds at Ozone.
Molds for making balls from meat (meatballs, meatballs, etc.)

(I thought to buy one, but Ozone showed "an attraction of unheard-of generosity": the purchase amount was 215 rubles. And my hamster squealed: "We must urgently braaaaat !!!!")
Molds for making balls from meat (meatballs, meatballs, etc.)
Today I compared "which one tastes better."
I decided to start with the most basic. Cutlets with mushrooms.
First the balls:
Molds for making balls from meat (meatballs, meatballs, etc.)

You need to put a little more in the upper mold so that it crawls out a little along the edges, otherwise the "ball" does not fall out.

Molds for making balls from meat (meatballs, meatballs, etc.)

They are so beautiful!

Molds for making balls from meat (meatballs, meatballs, etc.)

Now the burgers, my home people called them "Cutlets for boys", for the size:

Molds for making balls from meat (meatballs, meatballs, etc.) Molds for making balls from meat (meatballs, meatballs, etc.)

This is already in visual comparison:

Molds for making balls from meat (meatballs, meatballs, etc.)

Roll in breadcrumbs. Please note that the bottom of the burger vents can be removed - it is very convenient to take out the cutlet: the shape remains.
Molds for making balls from meat (meatballs, meatballs, etc.)Molds for making balls from meat (meatballs, meatballs, etc.)

One ball was specially flattened to the state of a normal cutlet.

Molds for making balls from meat (meatballs, meatballs, etc.)

Fried in a pan, although there was a thought - to be done so to the end - I'll start Tortilla!
Then I decided: next time - definitely!

Molds for making balls from meat (meatballs, meatballs, etc.)

And here, finally, the result: "boy" and "girl" cutlets.

Molds for making balls from meat (meatballs, meatballs, etc.)

Because of the frying, the "girls" cutlets have acquired the shape of meatballs, but all are smooth and beautiful.
And the cutter:
Molds for making balls from meat (meatballs, meatballs, etc.)

Summary: both are good. Although the burger device is more convenient with a removable bottom and ease of getting the cutlet. The boys liked the burgers more, because they also have more toppings!
But in balls you can come up with a bunch of recipes, not only cutlets, but even salad with balls will be very cool!
Coffeeberry
eta-007, Sveta, you are a giant! 👍🏻
And ball balls with filling can be baked in a keypop, so that they keep their shape.
eta-007
I have no keypopsnitsa ... And there it seems to me the balls are smaller ... These 5.5 -6 centimeters come out.

All recipes

© Mcooker: Best Recipes.

map of site

We advise you to read:

Selection and operation of bread makers