kykysik1107
Quote: Ipatiya

kykysik1107, bravo! What a fantasy!
This is all thanks to you !!!
Ipatiya
kykysik1107, it is unlikely. Fantasy and creativity are purely individual, your own. And the mold is just a device. For some reason, it seems that then you will do with pens no worse, or better than on a mold.
kykysik1107
Quote: Ipatiya

kykysik1107, it is unlikely. Fantasy and creativity are purely individual, your own. And the mold is just a device. For some reason, it seems that then you will do with pens no worse, or even better than on a mold.
The fact is that I bought it only because the pens did not work at all. Now you need to come up with different recipes, both salty and sweet, and you can surprise your guests!
m0use
kykysik1107, Iiiiiira, killed on the spot! Here are the pens! And mine is still hanging on a carnation, it's a shame!
shurpanita
Ipatiya, Svetochka, it’s impossible to pick up the form in time ...: girl_red: can a student courier eat to the Strogino metro station?
Ipatiya
shurpanita, alas! There are no such acquaintances. But we can cross somewhere.
prubul
kykysik1107, Irina thanks for the masterpiece. This is who will come up with a new sweet recipe for us! : oops: And how are those. what does paprika taste like?
prubul
So I doubt beautifully of course
kykysik1107
Quote: prubul

kykysik1107, Irina thanks for the masterpiece. This is who will come up with a new sweet recipe for us! : oops: And how are those. what does paprika taste like?
To be honest, I haven't tried it myself, and my husband doesn't really like paprika, so he took it off. It may even be better to simply tint some ingredient and roll in it. For example, remove cheese or a layer from crab sticks, and for sweet ones, peel, cocoa, grated chocolate, colored coconut, or powder for cakes.
kykysik1107
Molds for making balls from meat (meatballs, meatballs, etc.)
Since I ate salty balls, and apple pie for sweet, I had to think about the task for the form. Yesterday I made ice cream, the recipe for which I came across five times a day.
Grind 8 tangerines with a blender and pass through a sieve, add 400 gr 20% (I had 30%) sour cream and 1 can of condensed milk, mix everything well and put in the freezer for an hour, stir again after an hour, then again and again. Leave it overnight. In the morning, you will have a delicious popsicles. I don't have a special spoon for ice cream, and I decided to use a mold, but you can already see the result!
Premier
Quote: kykysik1107
Well, you can already see the result!
Offset, Irina, for desserts!
kykysik1107
Quote: Premier

Offset, Irina, for desserts!
Thank you!
kykysik1107
Quote: kykysik1107

Molds for making balls from meat (meatballs, meatballs, etc.)
Since I ate salty balls, and apple pie for sweet, I had to think about the task for the form. Yesterday I made ice cream, the recipe for which I came across five times a day.
Grind 8 tangerines with a blender and pass through a sieve, add 400 gr 20% (I had 30%) sour cream and 1 can of condensed milk, mix everything well and put in the freezer for an hour, stir again after an hour, then again and again. Leave it overnight. In the morning, you will have a delicious popsicles. I don't have a special spoon for ice cream, and I decided to use a mold, but you can already see the result!

And here's the cake itself, but that's a completely different story.
Molds for making balls from meat (meatballs, meatballs, etc.)
Tanuhka
Girls, I'll get in with advice. My girlfriend ordered such a mold for Ali, a long time ago, about a year ago, she says it is very difficult to pull out balls, both meat and rice, and I don’t know what she did there. So, my husband made small holes in the hemispheres, right in the center, and everything began to fly out with a bang. If you need a photo or details, I will clarify. And she also said that it is necessary to moisten them with water, and not with oil, with oil it sticks even worse. Or straight stuffing with wet hands and in shape. And she does not take out the finished balls, but knocks with a mold and everything flies out.
evk79
Ipatiya, Selena paid for one of my molds, so she now has one. There is one more mold to attach.
Marina22
Quote: Tanuhka
She said that it is necessary to moisten them with water, and not with oil, with oil it sticks even worse. Or straight stuffing with wet hands and in shape.
I don't know how with minced meat and rice, I haven't tried it myself yet. But with potato dough, water will not help. Before I began to lubricate with oil, I also tried it with water, it did not help.
It is necessary, probably, "by typing" to adapt to each product.
We have little experience yet, but we will learn
We will experiment and share our experience here.
prubul
Irina here is a clever girl. And what a beautiful cake. How did this drawing come about?
Natalia K.
Quote: Tanuhka
So, my husband made small holes in the hemispheres, right in the center, and everything began to fly out with a bang. If you need a photo or details, I will clarify.
Tatyana, of course you need to. We all need
Irgata
Quote: Tanuhka
So, my husband made small holes in the hemispheres, right in the center, and everything began to fly out with a bang


drilled give the balls better and also began to dip the forms into water before stuffing the minced meat and sprinkle a little with breading, bounce really better

drilled well, my husband drilled with a thin drill, then sanded the burrs, everything is smooth
Premier
I had an idea for wetting instead of greasing, but it shattered to dust the first time the molds were washed. I saw that the water slides off them remarkably without lingering. But the option with laying out the minced meat with wet hands looks quite viable.

Quote: Marina22
It is necessary, probably, "by typing" to adapt to each product.
But I agree with this! Girls, do not drop the topic, if you have worked out something sensible, write.

My son and I have already agreed to drill the holes. The question is in diameter. Irshawhat do you suggest?
Irgata
Quote: Premier
The question is in diameter
husband said - drill 4 mm
I didn't take a chance anymore, because the plastic is hard, it suddenly breaks, and everything was drilled so beautifully

about water - I dip the mold in a flat container with water, then sprinkle it with breading, it doesn't get very wet, but there is dusting
kykysik1107
How everyone was eager to buy molds, there was a queue, and no one was posting the recipes: girl-th: Where are you, owners?
Ulyala
And I overslept everything !!! I ordered an order, and that's it. And I forgot (((And now I look already got everything!
Premier
Irina, Thanks for the quick response. I also figured that it would be necessary to 4 mm, but I was afraid and offered my son a 3-ku. Now I will urgently "change my mind" for him.
Ha, he's a sensible boy, I hope he himself will guess the whole assortment to bring ...

Quote: kykysik1107
As everyone was eager to buy molds, there was a queue, but no one was laying out recipes
Everyone is in the bushes ... They are waiting for the piano to crush them!
Vaughn, even Admin is silent, and she also received a mold ... Probably, she is preparing something grandiose to kill us all on the spot.
Admin
Quote: Premier


Vaughn, even Admin is silent, and she also received a mold ... Probably, she is preparing something grandiose to kill us all on the spot.

Oh, girls, don't be equal to Admin Admin all rags, bags, garbage, sometimes nowhere to turn I promised everything, but nowhere to do, nowhere to turn fully
I'll rake it up with repairs, then I'll connect to you. And you do ... do I constantly go to the site and spy on you, I also wonder what happens in the molds
Premier
Quote: Admin
And you do ... do
Well, that's it!
julia007
Molds for making balls from meat (meatballs, meatballs, etc.) Molds for making balls from meat (meatballs, meatballs, etc.)

I made ordinary meatballs according to this recipe https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&topic=440272.0 turned out great and jumped out right away, and I was already getting ready to pull them out. I put a piece of cheese in one serving, everything is fine too. I think this is due to the fact that the mince from the egg became slippery, so they jumped out.
Irgata
Quote: kykysik1107
and nobody uploads recipes
they are, only in the subject are scattered

yes, there are some special recipes - everyone does meatballs, meatballs, minced meat is the same
we also cook rice on sushi, only different molding
behold round off cake-potatoes interesting
potato balls - also simple - mashed potatoes with an egg and filling

you can, of course, open a separate Temka - no longer with purchases of ball-making
Premier
Quote: Irsha
you can, of course, open a separate Temka
Reasonable.
Wildebeest
Irsha, Ira, maybe it's better to put the list of recipes on the first page ??
Irgata
girls ...I don’t know how to do this, maybe someone who knows will take
yes, it's easier to open a new topic so as not to get confused in Sberbank accounts
svetlana61
Girls, thank you very much, I received the package, everything went well! Everything was packed super!
Ipatiya
List of participants in the joint venture of forms for meat balls.

Moscow:
1) Antonovka - 1 piece +
2) baba Valya - 2 pieces +
3) Borisenok - 2 pieces +
4) Bullet - 1 piece +
5) VitaVM - 1 piece +
6) Dana15 - 1 piece +
7) DJ - 1 piece (Fofochka) +
8 ) ElenaBK - 1 piece +
9) Irina F - 2 pcs (Borisenok) +
10) Kokoschka - 3 pieces +
11) Lyusenka - 1 piece +
12) Maria1983 - 1 piece (by mail) + V 200 rubles + 33 rubles (package - 203 rubles, packing - 30 rubles)
13) Chubby - 1 piece +
14) Joy - 2 pieces +
15) Tancha - 4 pieces +
16) Ulyalya - 3 pieces +
17) Umka19 - 1 piece +
18) Fofochka - 2 pieces +
19) ShuMakher - 2 pieces +
20) avk - 2 pcs +
21) eva10 - 1 piece +
22) Galin - 1 piece + and selena - 1 piece +
23) fugaska - 2 pieces +
24) ginura - 4 pcs (Dana15) +
25) kill - 1 pc (ShuMakher) +
26) Lettera - 2 pieces +
27) marlanca - 3 pieces +
28) motoxxx - 2 pieces +
29) natalisha_31 - 3 pcs (Helen3097) +
30) NataST - 3 pcs +
31) Nira - 1 pc +
32) Rada-dms - 2 pcs (Bullet) +
33) Rada-dms - 2 pcs Tiraspol (Bulia) +
34) shurpanita - 1 piece +
35) Skazi - 1 piece +
36) Sneg6 - 2 pieces +
37) Svettika - 1 piece +
38) Vei - 1 pc (baba Valya) +
39) Vesta - 4 pcs +

Total: 72 pcs

St. Petersburg: general parcel by mail (parcel - 405 rubles, packing - 150 rubles) balance 45 rubles
40) Anna1957 - 1 piece (m0use) +
41) Wildebeest - 1 pc (m0use) +
42) burunduchok - 2 pcs (m0use) +
43) kykysik1107 - 2 pieces +
44) Mist - 1 pc (m0use) +
45) m0use - 1 pc (m0use) + V 600 rub
46) SvetLanaSSh - 4 pcs (m0use) +
47) Marfusha5 - 2 pcs (by mail separately) + V 250 rubles + 70 rubles (shipping - 246 rubles, packing - 70 rubles) balance - 4 rubles
Total: 12 + 2 = 14 pcs

Krasnoyarsk: general parcel by mail (parcel - 457 rubles, packing - 150 rubles)
48) glasha - 2 pcs +
49) Lady with @ - 5 pcs + 407 rbl
50) Premier - 5 pieces + 200 rbl
51) Zena - 2 pcs + V
Total: 14 pcs

Murmansk: general parcel by mail (parcel - 246 rubles, packing - 70 rubles) the rest of 34 rubles transferred to the phone
52) Bridge - 1 piece + V 140 rub + 70 rub
53) Nicoletta - 1 piece + 140 rbl
Total: 2 pcs

Nizhny Novgorod: general parcel by mail (parcel - 278 rubles, packing - 120 rubles)
54) Wildcat - 1 piece + 67 rbl
55) Tashenka - 2 pieces + 131 rbl
56) solmazalla - 3 pcs + V 200 rub
Total: 6 pcs
Novomoskovsk (Tula region): general parcel by mail (parcel - 211 rubles, packing - 70 rubles)
57) MamaAnya - 1 piece +
58) kirch - 1 piece + V 200 rub + 81 rub
Total: 2 pcs

Other cities:
59) ElenKo - 1 unit Kstovo Nizhny Novgorod region + V 210 rubles + 26 rubles (package - 206 rubles, packing - 30 rubles)
60) Jiri - 6 pcs Ulyanovsk + V 300 rubles + 91 rubles (shipping - 271 rubles, packing - 120 rubles)
61) Irina Tarasova - 1 unit Nefteyugansk +
62) Zamorochka - 1 piece Voronezh (by mail) + V 200 rubles + 36 rubles (package - 206 rubles, packing - 30 rubles)
63) Lyubanich - 1 pc Novosibirsk +
64) svetlana61 - 1 pc Petrozavodsk + V 270 rubles (package - 240 rubles, packing - 30 rubles)
65) cvezu - 2 pcs Aleisk +
66) Jenealis - 1 pc Sochi + V 200 rubles + 100 rubles (package - 238 rubles, packing - 30 rubles) balance - 32 rubles transferred to a phone number
67) julia007 - 1 pc Samara + V 185 rubles + 85 rubles (package - 238 rubles, packing - 30 rubles) balance - 2 rubles
68) KLO - 4 pcs Rostov + V 350 rubles + 50 rubles (package - 284 rubles, packaging - 90 rubles) the remainder of 26 rubles
69) Melena310 - 2 pieces + V 300 rubles + 19 rubles (package - 249 rubles, packing - 70 rubles)
70) Lara1 - 2 pcs Surgut + V 300 rubles + 30 rubles (package - 254 rubles, packing - 70 rubles) balance - 6 rubles
71) Natalika_1 - 1 piece Omsk + V
72) prubul - 4 pcs Lipetsk + V 440 rubles (package - 246 rubles, packaging - 90 rubles) balance - 104 rubles transferred to the phone
73) SmiLena - 2 pcs Volzhsky + V 185 rubles + 131 rubles (package - 246 rubles, packing - 70 rubles)
74) svbone - 2 pcs Rostov (Yaroslavl region) + V 350 rubles (package - 211 rubles, packing - 70 rubles) the rest - 69 rubles transferred to the phone
Total: 32 pcs

Total: 142 pcs when ordering 121 pcs

P.S. The list is in alphabetical order, including cities.

Jenealis
Irsha, gave her husband an assignment to drill holes tomorrow, the question is, do you need to drill both halves, or on one side?
Irgata
in both halves, by analogy with the meatball

Molds for making balls from meat (meatballs, meatballs, etc.)

Rada-dms
Quote: kykysik1107

How everyone was eager to buy molds, there was a queue, and no one was posting the recipes: girl-th: Where are you, owners?
And I'll post it now, since reproaches and suspicions have gone! I'll go and do something special in it!
Rada-dms
Here, everything worked out without any problems! The main thing is not to spare the oil when lubricating.
Help yourself to your health!

Curd balls with tasty and healthy fillings (mold for making balls or without it) (Rada-dms)

Molds for making balls from meat (meatballs, meatballs, etc.)
Florichka
Olya, well done! As always, beautiful and intelligible.
kykysik1107
Quote: Rada-dms

And I'll post it now, since reproaches and suspicions have gone! I'll go as a specialist in it, I'll do something!
Class! The beauty!!!
evk79
Ipatiya, Galin paid for my last form. Move it to her, please.
prubul
Selection of recipes
page 42 Vesta potato, meat (no recipe)
page 52 NataST cake potatoes (description page 53)
p. 52 Helen3097 crab sticks with red caviar (no recipe)
p. 56 Reina chicken breast with cheese and fenugreek (no recipe)
page 57 gala10 Hedgehogs with a secret (there is a recipe)
p. 62 MariV Cheese balls with potatoes (there is a recipe)
page 67 Marina22 Filled potato balls video
p. 70 Premier curd cheese with herring and Borodino bread
p. 70 kykysik1107 potato with herring
p. 70 kykysik1107 curd-cheese-egg-crab in a sprinkle of paprika. dill
p. 71 kykysik1107 fruit icecream
p. 72 Rada-dms Curd balls with tasty and healthy fillings

prubul
Girls 2 days without an Internet. I wrote to Chef with a request to put our recipes on 1 page, maybe not there: girl-th: no answer
shuska
Quote: prubul
I wrote to Chef with a request to put our recipes on 1 page
It is more logical to transfer posts related to the joint venture to another topic. For this there is a special section for joint purchases (and not to arrange a dump in one topic). And leave this topic for the exchange of information, experience and recipes.
solmazalla
Something the girls of Nizhegorodka do not want to take their molds from me
Tatiana27
Girls, if there is a free mold, I can redeem it.
Mila1
Quote: Tatiana27

Girls, if there is a free mold, I can redeem it.
Tanya, here https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&topic=450123.0
Tatiana27
Ludmila, thank you, I'm just from there - it's already sold there. I was sent here.
mur_myau
Where is the subject of the joint venture? Did not find.
SvetLanaSSh
Elena, the JV topic has already been closed. You just have to wait if someone sells their mold.
Vesta
Or try to order from this store

🔗

All recipes

© Mcooker: best recipes.

map of site

We advise you to read:

Selection and operation of bread makers