Kitchen machine ProfiCook MKM-1074

[Ekaterina25]

Ekaterina25, you understand German. look at what you found on YouTube to clean the bowl

[ladulenjka]

ladulenjka,
Lowering the temperature didn't help. Well, that means I'll try like the lady in the video. Since it burns, we will wash
Danke schön

[Ekaterina25]

Ekaterina25, you understand German. look at what you found on YouTube to clean the bowl

I liked the baking soda how it washed.
But it doesn't stick to me in that amount.

I would be in her place, remove the remnants of food, and then boil it with soda.

And I also wash with soda, easily and comfortably. But it does not often burn. For example, when I fry onions and carrots, I turn on 90 degrees - nothing burns.

[Masha]

Uh, I read everything The video is true,Mashahas not yet revisited. But I will master this quietly. I subscribed to your channel, I will watch a movie about a PC on vacation.
Mash, you remember, I wanted to buy a soup cooker. But I never bought it. And then I waited for the exit and test entoy car. Now I don’t know. Everything seems to be tempting, there are many functions. And you just praise it so much that you immediately want to run and buy. But, Christmas trees, I need it or not ... that is the question. How many of us there are such doubters.

P. s. yesterday the child watched a movie about sausage with me. This morning, looking at the one on the table, he said: "This is not the one that you showed yesterday!" And where can I get "that" now?

I am very happy with this car. Dough on dumplings 40 seconds and ready !!!!! The same amount for brushwood.
This is from what I did yesterday)))

[Ksyushk @ -Plushk @]

Ksyushk @ -Plushk @, Ksyusha, what can I say, who bought, then everyone seems to be happy)
It is clear that there is no perfection. Eno has many advantages: it does not jump on the table top, it is powerful, the price is good!
The minus is not big that it burns, but you can cope with this.
In short, a good machine)

And let's make the sausage!
I'm going to make another video about ham))

[Mash]

Mash, one thing stops me - it's that he needs a permanent place on the table. If I had it, I would have bought Thermomix a long time ago. Only this slows down.

And I will close the sausage shop until autumn. Yesterday I folded everything up and put it away.
This drawing attracted my child, the beef blotches are bright. I mainly from chicken, make different parts, there is no such pattern.

[Ksyushk @ -Plushk @]

Ksyushk @ -Plushk @, yes, a place is needed. If it is removed, then you will not use it.
And you can also make a little bit of a chicken, but it will not be so bright.
If you mix white meat and meat from legs))

Yesterday I was kneading dough for pizza in TM, because it jumps around the table like crazy.
He has no suction cups and rides on my tabletop as if on ice. Stood all 8 minutes beside him.
And in the PC there are suction cups and it does not move anywhere during mixing.
But I had to drive away TM yesterday, otherwise I stopped using it, only my PC is constantly at work.
And when the equipment is out of work, it's not good, like a car that no one drove for a year

[ladulenjka]

ladulenjka,
Lowering the temperature didn't help. Well, that means I'll try like the lady in the video. Since it burns, we will wash
Danke schön

you are welcome

I liked the baking soda how it washed.
But it doesn't stick to me in that amount.

I would be in her place, remove the remnants of food, and then boil it with soda.

Maria, how did you insert the video from YouTube? teach

[Valentine]

Valentine, where you write a message look up where the icons are.
You will see the YouTube icon you press
you get these bindings and insert a link from YouTube between the brackets

[Valentine]

Valentine, where you write a message look up where the icons are.
You will see the YouTube icon you press
you get these bindings and insert a link from YouTube between the brackets

Thank you! so easy to fool!

I have an emergency! Beat the whites onto a biscuit and, at ninth speed, scatter two butterfly attachments into small pieces and into which knives. The bowl itself flew off, one might say, into a non-working position and silence ... That's it .. Where can you get such nozzles now? Probably, I myself am to blame, it was not necessary at the ninth.

[Olga]

Olga, what are you !!!!
You can't !!
With a butterfly, only 4 speeds are possible !!!
In the same place he writes in the instructions and on the nozzle itself !!!

And in Thermomix only at 4 speeds max !!

[Masinen]

Masinen, yes, she was so stupid. I wanted to do everything faster and completely flew out of my head. I gave myself a small shock !!!! I'm surprised myself ...

Does the harvester itself work?

[Masinen]

MasinenYes, Masha, it works. The knives were so strong that they shredded the attachments to pieces. This is a lesson for me so that I do not rush. And it can be seen that the protection worked, as the bowl flew into a non-working position. Now I will make the noodle dough ...

Nozzles, if only in the service to buy.
Or on an Amazon from Germany, if any.

on Amazon I only found for "Rosenstein und Söhne",
🔗
and
🔗
they are very similar to ours. I was looking for myself, because I forgot to remove the nozzle and decided to clean the bowl by scrolling with water. but my nozzle is alive, but it's all scratched. I used speed 5.

[Valentine]

Valentine, I think it will do.
And at 5 it is impossible)

[Valentine]

Valentine, I think it will do.
And at 5 it is impossible)

I just didn't think about it, and since the PC was still hot above 5, it didn't turn on and that saved

Thank you girls, I'll try to order there. The noodle dough came out good. I like how Profikuk kneads any dough, here he is a big plus. Let's learn from each other's mistakes

[Masinen]

Masinen, but my TM does not jump with any dough kneading, and when the berries are frozen in it, I think because it is on my dishwasher covered with a transparent, puffy lining-protection. In Leroy Merlin bought covering surfaces. TM adheres well to it with its legs when I wipe it under it, and it also rises with this oilcloth

my grief is not abundant !!!!!!! The nozzle flew off the knife and as a result, the knives cut both nozzles in half !!!!!!
Now I am also in line for these accessories.

[Natasha]

Natasha, and you?
I remember it flew like this on Orson and I check 100 times to see if it sits normally.

[kolobok123]

kolobok123, I experienced it last week !!!

Well, I put the attachment on the knives, on top of the butterfly. Turned on and they jumped off and knives on the part
Olya, have you already ordered them?
Maybe together?

[kolobok123]

kolobok123, need to look for where to order? I haven't found it yet. If I find out something, then I will definitely write. I also had both nozzles to fly apart, but I "" exceeded the speed ", higher than 4 it was impossible

and I don't even know what to use the butterfly attachment for ... so there is a new one))) And so with my abilities I would have destroyed it long ago

p.s. My husband continues to improve the ventilation system, ordered some kind of resistor from ebay. Wants to configure two fans to run simultaneously. One 12-volt one is not enough (((So far, the device works without a rear grill

[Anya]

Anya, you can use a butterfly for whipping proteins.
Eggs with sugar on a biscuit. Beat the cream.
Butter with sugar, well, etc., etc.))

Links to all recipes on the first page.
If you have lost anything, then we are looking for the topic in the first post)

today I made mashed potatoes from mashed potatoes here is the result
slightly changed the proportions: 750g peeled potatoes, 250ml milk, 30g butter, 1 tsp salt and to taste of pepper and nutmeg. this time interfered with a butterfly attachment for 20 seconds, speed 4. The PC was shaking, but he resisted

Hello everyone. I reread the whole topic and decided to buy, while I was waiting I decided to ask you a few questions.
I had a sad experience with a cheap analogue, if they didn’t write about it, the knife broke while grinding frozen fruits. I watched the video about ice cream 4 times. It seems to grind without breakdown, closing my eyes in horror I will try.Or are there any restrictions? I am very afraid to break the knife again. And here's another question about mashed potatoes. Cook directly in milk? And then how to put on a bow tie? Still hotter? God forbid it flies

[Irlarsen]

Irlarsen, copes with freezing perfectly. His knives are very sharp.
Of course, you do not need to overload it and then it will work properly.
I cook mashed potatoes in a little water and the potatoes turn into mashed potatoes along the way ..
Or you can boil potatoes in a basket, then put on a butterfly and pour in milk and whip mashed potatoes.
Speed ​​limits with butterfly, max 4 speed.

So I, from my sad experience with ladymaxx, am afraid to make a mistake, I took the instructions into account ..... What does it mean to overload the car? For example, according to your video about sausage. Ground the minced meat chicken, pork, beef. That is, 3 downloads in a row. This is normal? Or do you need some breaks?
Why am I so boring? As a sapper, I have no right to make a mistake, not to make repairs, I live in a country where they don't sell nifig. I'm taking everything from Russia, after reading the forum. I've been reading for about 7 years, but I don't write.
So far, the multicooker has successfully brought the molds and the stem DD2. Now I will have two dreams for now: a ham maker and a Teflon bowl to the staff

[Irlarsen]

Irlarsenon the contrary, it is better to load 500 g of meat several times and grind)
But I do not recommend more than 500 grams. There is no need to take breaks.
Those he can perform several different works without interruption.
And overload is too much food, you don't need to put it in at a time.
There will be examples of norms in the instructions, but I reduce sometimes)

Thank you for your answers, I will try !!!!! Another question, to knock butter for cream with a butterfly along with a knife attachment? Should it be very soft or will there be nothing for the butterfly?
The knives on my Ladymaxx broke so quickly that I didn't even have time to try the butterfly, although I did everything strictly according to the instructions. But this machine, fortunately, was on sale around the corner. The knife flew, the money was returned, I bought a new rhinestone, the knife flew now for the third time grinding strawberries (the first 2 succeeded, and I did it not in a row, but once a day), I returned the car and finished the experiments
Now I've read horror stories about butterfly slipping off knives ........

[Irlarsen]

Irlarsen, mount the butterfly on the knife attachment.
I whipped the butter quietly for the muffins. She must be dressed until it clicks and everything will be fine)
And the knives will definitely not fly))))
I drove her from the very beginning and in full. 1 time, almost all day, she did something to me. As a result, it just warmed up, but remained alive))
In short, I checked the device for durability))

I read you like a novel, by God !!!!!! and the video was all reviewed by both yours and Tanyuli
It's so nice that it was you who answered me, otherwise I, like a partisan, sit in the bushes, although I have simply been living on a bread maker for a long time and a Boshik cube cutter and vacuum cleaners with a scrubber and a Panasonic bread machine ....... and recipes

Eh, it's time to go out to the people of their darkness

[Irlarsen]

Irlarsen, thank you))
Yes, it's time! We have a friendly and warm team here
So, write, ask!
I will always help as much as I can))

Yes, I put all links to recipes for PC on the first page.
If you need to look at something, then just click the link and you are in the right place in the topic)

[Irlarsen]

Irlarsen, durability is good if the device itself is without problems. Maria chases him and nothing ... But when I tried to grind two squids, it burned out ... but TM and 6 grinds without problems ...

[Liubov_Liubov]

Liubov_LiubovBy the way, I talked to my husband about your proficiency. He says that there is nothing complicated there, and it will most likely be repaired in any normal household appliance repair shop (not one where only boards can be changed).
The construction is very simple there.

[anna_k]

anna_k, Really? There, on the motor, the winding is completely broken (copper wire). Is it being repaired? The service said that only by replacing the motor, which are not available and others will not work.

[anna_k]

anna_k, Really? There, on the motor, the winding is completely broken (copper wire). Is it being repaired? The service said that only by replacing the motor, which are not available and others will not work.

If you can, throw me a photo in a personal, my husband will look and tell you for sure whether it's realistic to fix it.But it is precisely about the winding that he said that it is being restored. But this is done in a regular service, where there is equipment for soldering wires, etc.

[Anya]

Anya, it is possible to carry a motor to any construction market where construction tools are repaired. They wind motors there)

Masha, Lyuba needs this)))
My motor is stable and works without jambs))))) At least something did not break

Yeah, Love, you need to go to the construction market)))

Cool!!! I'll try it on the weekend! Thank you!