MariV
Oh, virgins, you scare, really! We need to promote our own - that's not inspiring me!
Tatiana_70
(Oh, virgins, you're scaring me, really! We need to promote our own - that's not inspiring me!) I wanted to quote and answer. Doesn't come out yet. My answer is this. A very cute device. Well, again. All the same, not for cutlets. Pizza! Yes! bakery products! Yes! But not wet. Take care of your devices.
Mikhaska
I, too, are slowly starting to worry about the frequent breakdowns you girls have! But, after all, during the preparation of pizza, the steam from Princesa is joking - Mom, don't cry! And condensation drips!
MariV
Tatiana_70I’m not talking about that - I have been using my princess and herbola since autumn; but short circuits are not encouraging.
Yes, condensation is flowing with might and main!
Tatiana_70
It seems to me that the condensate should be monitored. Having unpacked the whole princess, my husband, looking at the wires, appreciated them very well. Only the heating sensor and its bare ends. And the rest is a beautiful marquise- Everything is good, everything is good.
MariV
How is it, let me be curious, to follow this condensate? When the cooking is in progress, and the steam sometimes comes down, it is better to keep a little at a distance - you can burn yourself great.
A.lenka
Quote: Byaka zakalyaka
otherwise I'm trying on the price has already increased 2.5 times
Marina, she is now at 3.450 ozone. If you order from a mobile application, the discount is 500 rubles for the first order. Either you can use Thanks from Sberbank, or bonuses from MTS. You can save a little.
With my memory (and I have been tracking the Princess not so long ago, with NG, probably) prices floated from 4,200 to 3,150. So now it's more or less normal
price.
afnsvjul
Girls! So what about the bare wires? Or maybe you can immediately climb in and somehow fix it before it burns out?
Mikhaska
Well, maybe insulate it with high quality?
A.lenka
Quote: Mikhaska
And condensation drips!
Mikhaska, Irishka, where is the condensation dripping from?

Quote: MariV
When the cooking is in progress, and the steam sometimes comes down, it is better to keep a little at a distance - you can burn yourself great.
MariV, Olya, I’m thinking ... When I was frying in Princesk, steam was pouring out from under the front part, and plus / minus 5-7 cm on the sides from the front part. Maybe you should put a Teflon mat rolled into a roll under these places from below? To prevent steam from entering the bottom, but not to disturb the ventilation of the bottom?

I am also worried about the fate of the Princess, but after two, in my opinion, unsuccessful frying, I only bake in her now.
Mikhaska
A.lenka, zayush! And, here, right from under the handles of the lid on the table and dripping ... True, on the table ... BUT, this does not mean that moisture does not leak between the frying surface and the Princess's body ...
A.lenka
Mikhaska, Ira, I understand ... I don't have such a problem, because when cooking in the Princess I always put a Teflon rug on the bottom surface of the stove. And since I have it in size larger than the Princess (somewhere about 5 centimeters peeking out from the front, left, and right sides), then the condensation does not drip. Maybe he has time to evaporate from the surface of the rug? In principle, this is one of the options for solving the problem of condensation flowing between the lower frying surface of the stove and the lower part of the body. Are there sensors and wires there?

But I emphasize again: I basically only bake on the Princess.

I will add. I've seen enough creepy pictures on YouTube with burnt bodies of mini-ovens and spoiled countertops - now I'm putting a silicone mat under the Princess when cooking. Just in case...
Linadoc
I, as the first user in Russia Princeski, do not know what to say. Once untwisted, checked, found nothing.I fry everything - pizza, and pies, and potatoes, and cutlets, and fish ... right ON THE COVER WITHOUT EVERYTHING. Maybe I'm doing something wrong, that it has been working for me since June 2014 3 times a week under different conditions and under different loads without problems?
vernisag
Maybe the first batch was of higher quality? And then they began to drive ...
Ipatiya
Girls, what are you talking about? Manufacturers have been doing this for a long time. They are specially put into the structure, materials, etc., so that after a certain time the device will become unusable. And even expensive equipment has a limited resource. So that we endlessly buy. Is it expensive to install a high-quality thermal sensor? How about bare wires? Even pizza is scary to bake. And then you might think the baked goods don't float. In such a limited space, it still hovers, and pizza with an open filling especially.
Babushka
Quote: MariV

How is it, let me be curious, to follow this condensate? When the cooking is in progress, and the steam sometimes comes down, it is better to keep a little at a distance - you can burn yourself great.
I use Princesses mainly for baking. I noticed that when it happens, when it is not, and when the lid is opened, it tries to drain onto the hinges of the lid. There is a crack at the junction of the hinges. I try to remove moisture there immediately first. The greater the horizontal backlash, the larger the gap and the greater the chance of moisture ingress. There is an idea to make a gasket from a piece of Teflon mat.
Vishenka999
Quote: A.lenka
If you order from a mobile application, the discount is 500 rubles for the first order. Either you can use Thanks from Sberbank, or bonuses from MTS. You can save a little.

If you order from a mobile application and add a coupon with an MTS bonus - they will add up - no one knows?
balabolka
And the princess was returned to me from the service with the diagnosis "the malfunction was not confirmed." And indeed, she corrected herself, bakes until she misbehaves
Sergey Kornilov
As for shopping: I think it's better to wait another week, by March 8, discounts will begin, including at OZONE.
Irrashine
girls, and somebody bought this: 🔗
and how does it differ from princess, besides size and variety of shapes?
Manna
Irish, here take a look
vernisag
Quote: Manna
Irish, look here
Manyun, why are all the pictures gone?
Manna
I don’t know (perhaps the addresses have changed), and I cannot fix it without the help of the Chief - there is no longer any possibility for editing
A.lenka

Girls, I wrote in Nordic, I duplicate it here too. there is already activated 500 bonus points from MTS on Ozone. I can order you a Princess or something else from 3.000 rubles (with a discount of 500 rubles) to your address. The offer is valid for 2 days. Then the points will expire.



Points are added.
Irrashine
In general, I looked and realized that these manunks are suitable for me for the sea, when I don't really want to cook, and the dishes are someone else's and in general, and then everything is ready. would be a little cheaper if I took it without looking. And I'll think about it again. after all, I took my princess for 2300, and here a manunka for almost 4
Irrashine
Eh .. Alenka, where have you been before)) I just ordered 4 thousand yesterday ..
kirch
A.lenka, points would be useful to me. I want to order a Travola dryer
A.lenka
Irrashine, so you can probably refuse and order a new one ...
I canceled orders a couple of times when I forgot about the discount.
vernisag
Quote: Irrashine
and here a manunka for almost 4
It seems like 2,490 rubles it costs
A.lenka
kirch, Lyudmila, write in a personal all the data. Is it more than 3,000 for sure? If less then the discount will not be given ...
Irrashine
Quote: vernisag

It seems like 2,490 rubles it costs

WHERE? I did not find it on ozone, I found it in some home store, there it is 3,990, but it’s some kind of action now and it’s 3,590, but so that 2,490 .. I could buy right away)
kVipoint
Irrashine, in the technopark, too, 2490 rubles. worth 🔗... I looked where you live, they may not be delivered to you (((
Irrashine
Quote: kВipoint

Irrashine, in the technopark, too, 2490 rubles. worth 🔗... I looked where you live, they may not be delivered to you (((

the main thing is that they deliver to Krasnodar, and from there I already have a channel
vernisag
Quote: Irrashine
WHERE?
Here's a tut
Andreevna
Oh, girls, this looks like it and threatens us Well, I should definitely stop the oven in the princess, well, at least for a while
Pizza makers Princess 115000, Travola SW302T, Fagor MG-300
kil
Andreevna, +1, I don’t have beads, I don’t wear them, in short, nothing fit in AAAbche
vernisag
Alexandra, are you guiding my photo stupid? and in general tama is all about me ...
Mikhaska
Quote: vernisag
and in general tama is all about me ...
What is it about you? It's me, just getting off my tire! In, Sashulka! Already began to work part-time as a paparazza!
vernisag
Quote: Mikhaska
It's me
You’re all skinny, you saw my figure there
Seven-year plan
And about me tooooooooeeee !!!!!!! ..... ,,

What???!!!! What are you doing ??? !!!!!!
Seven-year plan
Irina, Irrashineso 2490 is a Brand!
And there are only three plates!
And according to your link, a completely different device, very similar!
And with six plates!
I wonder how it is covered? High quality?
afnsvjul
Quote: Seven-year
What???!!!! What are you doing ??? !!!!!!

All urgently to Tatiana-Zhirafka in Temka for slimming !!!!!!
Irrashine
Quote: Seven-year

Irina, Irrashineso 2490 is a Brand!
And there are only three plates!
And according to your link, a completely different device, very similar!
And with six plates!
I wonder how it is covered? High quality?

yes, I already understood when I looked. But one to one! I wonder who took a copy from whom? I wish I could read the reviews ..
Seven-year plan
Irina, so Brand took it off !!!
They just released them! Still raw ...
Read how the girls cooked there!
Not yet impressed at all!
And when I just saw it, soooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooaaaaaaak !!!
But now I'll wait ...
Mikhaska
Quote: Seven-year
so Brand took it off !!!
In-in !! I also jumped at first: how good it would be to have one in addition to the Princess! And, then she looked, read ... And calmed down a little and even slightly disappointed ... Ah, that would be of help in cooking for one or two in a fast way!
Andreevna
Quote: Mikhaska
Already began to work part-time as a paparazza!
Yeah, part-time job for Toka's pensions, I first spared myself
comeliy
Girls, I also noticed that when the lid is suddenly opened, the condensate flows into a small hole in the mount between the lid and the bottom of the stove. Previously, after use, I inserted a cloth napkin deeper into this hole with a toothpick and turned the oven on its side. The napkin was absorbing moisture and was sufficiently wet. And now I slightly open the lid with a wooden spatula and wait for the moisture from the lid to evaporate. Since the lid is hot, the condensate evaporates very quickly, then I open it completely.
afnsvjul
Quote: comeliy
And now I slightly open the lid with a wooden spatula and wait for the moisture from the lid to evaporate. Since the lid is hot, the condensate evaporates very quickly, then I open it completely.

Natalya, you can do this at the end of cooking, but when you look in the process to see if it is ready or not and then close it again, it still drips off
Vesta
Yesterday I tried to bake this cake
https://Mcooker-enn.tomathouse.com/in...on=com_smf&topic=159683.0
and something didn't work out for me, I kept it in Princesk for 25 minutes (the pie was in a metal mold on the rug), the top didn't even brown at all, I had to bake it in the oven ...
Last week I fried stuffed pancakes, the day before yesterday I fried cutlets, and I had to turn this and that so that it was rosy on both sides ...
Here they wrote that the top is frying and you have to cover the rugs, but I do not have enough heat.
Song
Quote: Andreevna
part-time job for pensions
What is the pension, what are you girls? The scholarship is!

All recipes

New recipe

© Mcooker: Best Recipes.

map of site

We advise you to read:

Selection and operation of bread makers