Multicooker Yummy YMC-506

It's okay (it's just that the rules of the forum prohibit multicitation)

And with non-stick cooking bowls for these models are not?
If you will allow me, a little advice - thoroughly wash the bowl (you can even use the hard side of the sponge, if it is not new) so that the pores of the coating do not clog, otherwise everything can begin to stick to it very soon

Oh, thanks for the advice! How long will the bowl last, approximately?

So far there are no bowls for them, since the model is completely new! But I will be buying another cup soon, just from a different manufacturer, fits perfectly!

It is difficult to say about the timing, for someone such bowls begin to stick after a few weeks, and for someone they serve for a year or two

It is difficult to say about the timing, for someone such bowls begin to stick after a few weeks, and for someone they serve for a year or two

You know, for now, pah-pah, everything flies! I hope this will continue

So far there are no bowls for them, since the model is completely new! But I will be buying another cup soon, just from a different manufacturer, fits perfectly!

Which bowls fit this mule? And please write down the dimensions of your own bowl

Which bowls fit this mule? And please write down the dimensions of your own bowl

They come from Redmond, I tried both Teflon and ceramics! Is it for you to measure and write? I'm just at work, no way

Virgo, I just draw your attention to the fact that not only the diameter and height of the bowls must match, but also the geometry of the bottom.

Is it for you to measure and write?

Yes, please measure the saucepan. When it is convenient for you Dimensions can be specified on the first page

Yes, please measure the saucepan. When it is convenient for you Dimensions can be specified on the first page

Ok, let's do

Pilaf added to recipes. And for some reason the photo was not inserted (((

Pilaf added to recipes. And for some reason the photo was not inserted (((

Then read how to do it https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&topic=203848.0

Uraaa, it worked. I did the first half and missed the second. Thanks a lot

_Lilichka_, added cupcake recipe!

Virgo, here you post the main photo of the recipe and a link to it. This will make it easier to navigate the recipes. And the recipe itself can no longer be described here (only some nuances of the device itself when preparing this dish)

Like this:

Cupcake "Marble"

Oh cool! Thank you

Liver cake

Mackerel roll

I see you can't insert pictures ...
Copy the address of the picture with the right mouse button. Then press the button and insert your link into the resulting code

[img]

You get the following code

[img] https://Mcooker-enn.tomathouse.com/forum/result-photo/308212.jpg

and as a result

Thank you, I really didn't succeed (((
I'll try

I made buckwheat, it came out crumbly, tasty)))

I made buckwheat, it came out crumbly, tasty)))

What mode, what proportion, what was besides buckwheat and water, how long did it take to cook?

And here is such a banana-nut manna !!!)))
I didn't bother a little, didn't calculate the time, but very tasty! I took the recipe from here

I didn't bother a little, didn't calculate the time, but very tasty! I took the recipe from here

Indicate how long you baked and how much you think you needed to bake. And it would be nice to give a link to the recipe

What mode, what proportion, what was besides buckwheat and water, how long did it take to cook?

Rice / Groats mode, 2 multi-glasses of buckwheat, 4 water, a slice of butter, I also added 12 vegetables seasoning (I love her), it took 25 minutes to cook!

Indicate how long you baked and how much you think you needed to bake. And it would be nice to give a link to the recipe

OK!
https://Mcooker-enn.tomathouse.com/in...on=com_smf&topic=175343.0
The recipe indicated a time of 1 hour 15 minutes, but the temperature was not indicated. I have a standard 130 degrees for baking. In general, it turned out a little in time, if only 10-15 minutes I think it would be just right!
I'm a beginner, just learning

The recipe indicated a time of 1 hour 15 minutes, but the temperature was not indicated. I have a standard 130 degrees for baking. In general, it turned out a little in time, if only 10-15 minutes I think it would be just right!

It is possible that the reason is the torment. Was the dough not too runny? Usually it is baked at 130 ° C for 1 hour and 20 minutes. I cook manna without eggs and in less time, but the dough should not be runny.

It is possible that the reason is in flour. Was the dough not too runny? Usually it is baked at 130 ° C for 1 hour and 20 minutes. I cook manna without eggs and in less time, but the dough should not be runny.

Maybe the dough was average, but not like thick sour cream! I did it strictly according to the recipe!
Will you throw in some cool recipe? I want to do something interesting on the weekend, you don't have to

[Sonadora]

I love Chocolate pie with zucchini from Sonadora

I did it strictly according to the recipe!

Flour can be different. If not of very good quality, then you have to add more of it.

It will not bake, it will dry the condensate. There are no such multicooker so that the upper heating element is so powerful as to ruddy baked goods.

There is no upper TENA, a simple deception. This means that the heat is evenly distributed in all directions. Accordingly, the top crust cannot be obtained even theoretically.

[Having tried the new product, I bring my first conclusions to the readers' judgment:]

Having tried the new product, I bring my first conclusions to the readers' judgment:
"Adjusting the time and temperature during cooking"
Definitely a plus. In the previous model, the program had to be turned off and then turned on with new settings.
"Multipovar program with temperature adjustment from 35 ° C to 180 ° C (in 5 ° C increments)"
Nothing new, just a separate program. The same actions were available before. But, given that the factory temperature settings of automatic programs are imperfect and are subject to adjustment during cooking, this is a useful program for inexperienced housewives.
"Disable auto heating"
The desired function.
"Touch control panel"
Big minus, although some people like it.
"Sound signal after the end of the cooking program (adjustable)"
Thank you for a welcome innovation.
"3D heating (top, side, bottom)"
Pure advertising lies. The heating plate is located at the bottom. With the same success, we can say about a gas stove - 3D.
"22 automatic programs and 30 manual settings"
Advertising gimmick and slyness, you can write about hundreds of manual programs, counting every button press. Given the possibility of regulating temperature and time, you can freely get by with a dozen of the programs, the field for creativity is huge.

As with any technique, the user must apply his mental abilities; a multicooker has not yet been created for all occasions of culinary life.
Fundamentally - new models are prepared in the same way as the old ones, you can not change the awl for soap. Although .... If you choose your first assistant, then the Yummy YMC-506 is worth looking at. Similar models of promoted brands cost 2-5 times more, but no better.
I will calm inexperienced housewives - in Yummy you can cook almost any dish from the recipe of other multicooker.

There is no upper TENA, a simple deception. This means that the heat is evenly distributed in all directions. Accordingly, the top crust cannot be obtained even theoretically.

And where did you get this information that no multicooker has a top heating element? It's a delusion.Some multicooker has upper heating elements. They usually work in the "Bake" mode. Their function is to dry condensate so that it does not drip onto baked goods. For browning the top, such heating elements, of course, do not have enough power. Whether Yummy has an upper heating element, I can't say, for this you need to open its "skull" to be sure.

And where did you get this information that no multicooker has a top heating element? It's a delusion. Some multicooker has upper heating elements. They usually work in the "Bake" mode. Their function is to dry condensate so that it does not drip onto baked goods. For browning the top, such heating elements, of course, do not have enough power. Whether Yummy has an upper heating element, I can't say, for this you need to open its "skull" to be sure.

My condolences, but I did not talk about all the multicooker, here in the thread we are talking about Yummy YMC-506.
Advertising nonsense like "dry condensate" I do not understand with my engineering mind. Like this?
I shouldn't argue with a lady. Let the repairmen give their information, they know everything.

Advertising nonsense like "dry condensate" I do not understand with my engineering mind. Like this?

To understand this, you need to try to bake something in a multicooker with the presence and absence of an upper heating element and look at the results at your baking (for this you don't need an engineering mind)

Despite the fact that the quotes below are not for this model, but in response to your "misunderstanding"

Now I will show how it works in a model with an upper heating element, a thermal sensor and a removable cover. Here is the lid, which is fastened on top with two latches, a gray silicone insert allows the steam to rise to the metal plate, behind which the thermal sensor is hidden.

Here the removable cover was removed, you can see where the steam got into.

In the last photo, the thermal sensor itself is hidden under the foil below the hole.

3D heating is realized by three heating elements, one main and two additional ones. Photo of additional heating elements: in the lid and around the bowl.
🔗 🔗

Yes ... and ... it is not customary to communicate in such a rude tone on this forum

[_Lilichka_]

_Lilichka_ , Pull out incoming messages, I can't write to you in a personal message !!!

Some models of multicooker with 3D heating (according to manufacturers):
• CUCKOO CR-0821 FI
• PHILIPS HD3 039
• POLARIS PMC-0512 AD
• Brand 37501
• REDMOND RMC M 20
• REDMOND RMC-4502
• LIBERTON LMC-05-02
• DEX DMC-60

For multicooker Yummy created separate section

Wow!!!! Super! Thank you

Hello everyone!
Have you got this multicooker and can't set the clock !? who will tell you how ???

Good day! Congratulations on purchasing this wonderful slow cooker.
The instructions describe in detail how to set the clock. Everything is very simple there! It is necessary to simultaneously press and hold the Hours and Minutes buttons, and when the time starts flashing, set the time with the Hours button, and the minutes with the Minutes button, and press the Start button to confirm. All!!!

Hello! Take in your ranks. Today I was presented with a Yummy 506 multicooker at the DR. I will master.

I congratulate you on your birthday and on such a wonderful slow cooker
Then write your impressions, we will look forward to

Take on the ranks of the Yummy pioneers.
The cartoon is my second, the first Philips HD3077, which for many people immediately created a lot of problems, it served me a year without a hitch, but I, while I was changing the battery for a long time and tediously (but my uncle in the service was inveterately arguing that this could not be , it’s she who broke, I’ve already seen how many of them), and when they did, I came to pick it up, I ask, they say, what happened to her though - the only answer was "oh, I have 4 of them there, I and I don’t remember what you had there "... At the same time, they repaired it on the same day when I took it, only until lunchtime ... What is the record on the guarantee ..

In general, while my toon was not there ... I climbed into the Internet to roam, see what else they invented ... And then I came across two new animals - dex 65 and yummy 506 ...I read it, saw enough, and since I am passionate about how I love finely programmed technology, I wanted to ... As a result, my Phillips found new pens, he was well-groomed, on the second day they already bought ... But I didn’t work out buying Yammy. .. The first time they sent me, I got the feeling that there were scratches inside, on the bowl, and something was falling on the steam valve ... I had to decide on a trip to the capital to change it myself. The money was returned, but with the acquisition of a new problem again, they brought back a scratched one (where do they only get so many of them ??). As a result, the martyr got me a new one, neat, but on the trail. day.

The only thing that still bothers me is the smell of plastic, and not inside, but outside, when it is in baking mode ... But I have cooked in it only twice and a half so far, so let's see ...

About baking - I cooked on a multi-cooker, it took about half an hour for a lush charlotte at 145 ° С.
Stew is also a multi-cook, changing temperatures from frying to stewing. Delicious)

The weekend is just around the corner, and the holidays - I'll use it, if it's interesting - I'll take a photo)
Sorry, it was written too much - painful

Take me to your ranks, they gave me 506 beauty for the new year, I've already tried rice for sushi, it's just a bomb !!

Happy New Year to everybody!

Owner girls, please respond, is there a smell of "melting plastic" or something similar when the cartoon is operating at a temperature above 130 degrees? I thought it was like a new one, it will pass ... does not work (The smell comes from about the place where the lid is connected to the body

cooked Kiev cutlets in deep-fried, there was no smell. I have already tried hodgepodge, borsch, pilaf, omelet.

"3D heating (top, side, bottom)"
Pure advertising lies. The heating plate is located at the bottom. With the same success, we can say about a gas stove - 3D.

Oh, yes, yes, there is no side heating element here, unlike my previous multi Philips 3077 ... I can not say anything about the presence / absence of the upper ten, I did not open the skull, only the case)

Eh, yes, there is no side heating element here

Do not be discouraged, this lie does not in the least affect the ability of multi to cook various dishes well.

Let's see how it will cope in the future. I have something to compare with) Yes, and today she has a good program: apple casserole, cabbage pie and two biscuits

That's just a little annoying odor ... I spun it out of my nerves, looked through everything, if anything is melting - no, the whole ((And the smell of burnt plastic does not disappear during baking

she has a good program

strains foreign smell

You know, I became convinced that the number of programs is relatively unimportant, all programs must be adjusted taking into account the recipe and products, since there is such an opportunity. In short, no one canceled the hands and brains.
But the smell of plastic is very bad, whatever the sellers say on this topic, characterizes its quality. Try rubbing the plastic with vinegar and water, or boiling the water in it several times. Should pass. I didn't have that.

In general, I cook everything on a multi-cooker, adding or removing temperature and time) It was on him that I "pecked", because of him I changed the first cartoon, which has a year of official. guarantees remained.

Try rubbing the plastic with vinegar and water, or boiling the water in it several times. Should pass. I didn't have that.

But this will not work, the smell goes somewhere behind, roughly where the die is screwed on the connection between the lid and the body (she explained it this way). That is, it does not smell like a saucepan (I removed its smell by boiling lemon compote) and not around a potted plastic.
Here is such a garbage, little kids.

the smell is somewhere behind

And the smell of plastic or burning?