Kapet
On the advice of colleagues (Diamond Hand), without further ado, I bought a 3000 VA stabilizer for the dishwasher. Perhaps sometime later I will return to the hot water idea, but not now ...
indy2004
Clean dishes for everyone! Need some advice - soon BEKO DIS 5831 will be brought, I would like to check the work. Is it possible to simply plug it into a power outlet without water to see the display work? Is it bad for a typewriter? Thank you !
Olchik86
indy2004, I join the question! I just can't figure out how the check in the store goes. I'm going to pick it up, but how can I check at least the display, the performance?
Bijou
Quote: indy2004
Is it possible to simply plug it into a power outlet without water to see the display work? Is it bad for a typewriter? Thank you !

You can, of course. Can you turn on and cycle your washing machine with the water tap turned off? It's the same here, and the machine will not allow you to start the cycle without water supply. Water is required only after the door has been slammed for installation or after pressing the Start button for a machine with an open control panel. For reinsurance, you can set a delay.
Olchik86
Bijou,
Quote: Bijou
Can you turn on and cycle your washing machine with the water tap turned off?
I can't :)))) she's still in the store :))
Lenochka, but about the shut off water tap ... if the typewriter has an aquastop, I still need to dive under the sink and turn off the tap after washing? Or am I misunderstanding something? Now I have read the instructions ordered by Bosch, so it also mentions about closing / opening the tap before / after washing. For example, my Bosch washing machine with Aquastop is always connected to water. Parents of their Bosch with the same function first started with the opening of the tap (in the closet in the toilet), then stopped.
Bijou
Quote: Olchik86
For example, my Bosch washing machine with Aquastop is always connected to water.
That's what I said about her, that you can try to turn it on by turning off the water, and you thought about the dishwasher (which does not exist yet). So draw an analogy between the machines, because in principle, in this case, you are interested in the same thing - to turn it on, to use the programs, but not to start the wash (wash).

Dishwashers usually also come with aquastops, except for the most budgetary ones, so more often people do not bother with switching off. People quickly get bored of turning off the taps even on typewriters without aquastop, what can we say about such. Plus, not every crane can withstand such a tough operation - but how did the master save and deliver nonsense? I turned on and off on the radiator too, and it was enough for only two winters.))

So I don't know, to be honest. It is generally accepted that the aquastop itself is no worse than a tap, because the normal position of its valve is closed, until the voltage is applied, it does not open.
Olchik86
Bijou,
Quote: Bijou
and you thought about the dishwasher
I only think about her! your eyes can't see anything! I started saving up dishes this morning for checking tomorrow night! Oooh! if she doesn't come again, I'll brainwash everyone there

Friends, another question. The instructions strictly say that you need to transport the PMM only in an upright position, supposedly the water inside can get into the control unit, etc. I think that there was no water in the new car, but it was checked at the factory. They started it up anyway, water was poured. So you can't even put a new one on the barrel? Who transported how? We just want to shove her into our car with the rear seats folded down.
Bijou
Olchik86, as a last resort, you can put the car on your back. Just yesterday, I read this somewhere in passing, but I don’t remember where.)))
Diana
Olchik86, I have been using a washing machine and a dishwasher for ten years and never (even when they were leaving for a long time) did not turn off the taps on the units and, thank God, there were never any problems
Olchik86
Bijou, okay, tomorrow we'll play Tetris :))
Diana, no, I'm a coward, I disconnect and block everything everywhere :) the house is not new, the wiring is a nightmare, the bathrooms - tomorrow I will feel sorry for my husband, how he will squirm there with the connection! I thought that I would endure until the move. Nah ...
Diana
Well, good luck to you!
Olchik86
Diana, Thank you!
then I will give a report everywhere :) and even there are few reviews about Bravix products, but we have no watson in Russia with homework! and about the installation ... and about how to drag the dishwasher to the 5th floor without an elevator
Bijou
Quote: Olchik86
and how to drag the dishwasher to the 5th floor without an elevator
Yes, it is not heavy! )) That's when my two were washing the washing machine above 80 kg, then I heard enough about myself.

Good luck !!
Olchik86
Bijou, is it lighter than a washing machine ??? uuuu ... then everything is normal! We took a washing machine at a wholesale price through friends and they brought it to us at midnight by an evening horse from Paris from Moscow! Nobody expected, my husband's friend was visiting us. So they, under the influence of 100g of cognac, dragged the washing machine with a smile :)
Bijou
Quote: Olchik86
Biju, is it lighter than a washing machine ???
Ummm .... It depends on what kind of washing machine, probably ... Our full size is 8 kilos - not Mile per centner, of course, but also not an inch.))
Olchik86
Bijou, looked: our washer for 5kg - 62kg, and PMM - 51kg in a package
Olchik86
I report!
It didn't work out to drive the PMM in their personal car, they pulled out no less "tag" from their taxi, otherwise someone else would have taken my Boshulya at an enviable price in 3 days. I could not allow this
BUT HOW ... in a tag?
In general, friends, even a full-size PMM with a width-depth = 60-60 and the same washing machine can be dragged into the back seat of the Lada "15" by removing the back door! Unscrew-screw - a couple of seconds with keys 8 and 13!
Do not spend 1.5-3 thousand on delivery, but go for it!
Well kid move the front seat! I was ready to sit on a torpedo for the sake of my new assistant!
sima12
Tell me, do everyone have corners for attaching the PMM to the table top? And then for some reason I don't have them, and in general, how is it attached to the tabletop?
Sonadora
Sima, I didn't seem to have such corners. The PMM was attached not to the tabletop, but to the walls of the niche (side), where it was built. There were definitely screws or self-tapping screws (?) For this.
sima12
Otozh, it began that some were attached to the tabletop, I found corners in the Internet that should be, so I was worried why I don't have them And they probably are not needed, because my husband and I looked and did not understand where they should be attached

And the side ones are definitely and clever
Chizh
Good day!
I bought PMM at the weekend to deliver, but did not solve the issue with the installation. Tell me how you solved this problem? If there are representatives from Moscow, what are the prices for this case now?

All recipes

New recipe

© Mcooker: best recipes.

map of site

We advise you to read:

Selection and operation of bread makers