Vacuum packing machine

[Marina]

MarinaTo justify the delivery a little, I also ordered vacuum rolls, lids and containers. And since the cost of the hose itself is not very high, it turned out well.

That's just the point, I have it all. Wax recently bought it. I ordered Redmond bags in dns, they were inexpensively in a roll, a manual packer also with lids. I took banks here on the site. Simple packages in Metro bought 2 packages.

Hmmm, then it's really a shame. But I always take it in reserve, because it’s expensive to pay for delivery, I don’t like it.

After reading your praise, I ordered this device for myself! On Friday I plan to receive) Thank you, girls and boys, for sharing your experience!) I ordered Sigmund, I hope that it will be useful in the household.

[korolenok]

korolenok, even how useful it will be. I, too, with Sigmund not so long ago, but I love him anxiously. I haven't used it a lot yet. Something was packed for storage, and the sous-vide meat was cooked several times. Since the packages are expensive, I save them, I haven’t got them cheap yet.

I, too, with Sigmund not so long ago, but I love him anxiously

Likewise!

Since the packages are expensive, I save them, I haven't got them yet cheap

I bought in a joint venture at our wonderful forum from Masha, it turns out profitably.

[Zamorochka]

Zamorochka, I also bought, but still the shore. The harvesting season is coming soon. Before sending to the freezer, it will be evacuated now))

[Zamorochka]

Zamorochka, Galina, can you have a link in a personal, where is this joint venture?

[korolenok]

korolenok, I took containers with packages from Maria (Masinen) - Vacuum sealers, Status containers, Caso packages, Clatronic (SP Russia). Look, you will find a lot of interesting things with her, maybe you need it, but you don't know yet.

https://Mcooker-enn.tomathouse.com/in...on=com_smf&topic=469852.0

[Gingi]

Gingi, Galina, thank you very much! surely it is necessary!

[Gingi]

Gingi, Galina, Thanks for answering Irina ,

Hello everyone! I finally took my Sigmund today! Arriving home, the first thing I did was testing. There were no problems with the roll from the kit, but I didn’t flatter something with the container ... I closed / pressed it this way and that, it doesn’t evacuate at least crack (((
Girls, should the container lid snap into place or fit snugly?
In the evening I hit the Metro, bought bags for vacuum and "finished off" all the rest of the contents of the refrigerator, which was only suitable for these purposes)) With the tubes Zema (this is his name already) "sucked" the bags just like that!
My mother was visiting me, she appreciated my purchase, we experimented with her, but my husband and son did not understand at all ... I think they decided that I was cuckoo (((Let them think what they want, and I'm sure that now I will reduce the number of discarded products to a minimum and the device awarded with the comment "there is nowhere to put money" will justify its cost and more than once.
Girls, did I understand correctly that Status containers are suitable only for "their" units, and when using other vacuums they crack? And I had already laid my eyes on them and wanted to save money ...

Girls, did I understand correctly that Status containers are suitable only for "their" units, and when using other vacuums they crack?

For Status, I only close them with a manual pump. I also heard that it is not desirable for others, you can not feel the pumping process and then the container will crack.

Korolenok, did you set the valve on the container lid to the "closed" position? I went with the container without much effort, it's a pity that there is only one container, I want another bigger one.

Added Saturday 18 Feb 2017 00:13

Korolenok, the lid is simply put on, does not snap into place, it has a resilient gasket that should fit snugly against the top edge of the container. Maybe this gasket has moved a little? Or was it wet?

I also heard that it is not desirable for others, you can not feel the pumping process and then the container will crack

That is, they do not need a vacuum at all, only a little air can be pumped out, right?

[korolenok]

korolenok, From my own experience I tell))) I dragged my Sigmund to the service due to the inability to close the vacuum container ... I was given a new one ... And the same thing - well, the container does not close and that's it! I think what is wrong. bliiin! And so))) The tube is tightly inserted into the hole, and I did not insert it completely))) You need not be afraid and push it straight to the end both in the device and in the container lid))) And everything, you will be happy. Do not be afraid)))

Posted Saturday 18 Feb 2017 08:59

Now about the containers Status and Sigmund. Business, of course, is the master's. but ... I've been pumping it out for 2 months already, the flight is normal. After all, if for this we use a special CONTAINER button, then the device itself will stop pumping when it is needed. The native container is much thinner than the Status ones and nothing holds))) I think the container burst for those girls who do not have the CONTAINER mode in the device and they themselves, on a whim, conducted the pumping process, they could have gone too far ... But this is my opinion)) )

[Lariskin]

That is, they do not need a vacuum at all, only a little air can be pumped out, right?

Well, why, just this vacuum is created by a hand pump, and working with it, you feel when the process is completed, the piston moves with difficulty.
Yes and Lariskin, Larissa, correctly wrote that the Status container is made of a stronger plastic than that of Sigmund, and even more so, there is a function for pumping out of the container, so everything is already calculated)))

Thank you girls! You convinced me)) I will decide on containers.
And I'll experiment with my own, because everything is fine with the lid, I set the locks correctly, but the hose is really tightly inserted, maybe there is a problem in it ...
Girls, for containers Status need to buy a hose Gochi?

Girls, for containers Status need to buy a hose Gochi?

I bought Status with their manual pump, it costs a little more than 200 rubles. Therefore, I am vacuuming them. Gocha is there, but to be honest, I did not try to evacuate the Status with it, it is quite convenient and quick manual. Holds a vacuum perfectly! In general, cool containers!

Well, why, just this vacuum is created by a hand pump, and working with it, you feel when the process is completed, the piston moves with difficulty.

Vacuum is when there is no air (or any gas) from the word at all. Even benchtop vacuum drawers have never claimed 100% pumping.) Only 80% seems to be. But even this becomes lethal for containers, because you need to feel something there? So that all the air doesn't accidentally run out, right?

Today I dug up a piece of cake sealed in a film in the refrigerator, which is more than a month old. It was pumped out decently, the honey cake shrank noticeably. Cut it - the smell is completely fresh, like the taste too. There are no risks, but the very fact ...))

I have an evacuator Sigmund and containers Status. In Siegmund, as you know, there is a "Container" function, nevertheless he spoiled the Status container for me. It is not the container itself that cracks, but the lid. It is very strongly drawn inward when air is pumped out, and cracks appear on the inside. By the way, the instructions for the Status containers do not say anywhere that you cannot pump out the air with a vacuumizer, I specifically checked.

By the way, the instructions for the Status containers do not say anywhere that you cannot pump out the air with a vacuumizer, I specifically checked.

ABOUT! Well, that means they will write! Who wants to admit that plastic is not very suitable for such pressure when you can make money ...
Probably, containers should be selected in different sizes so that the void remains as little as possible, right? Then there will also be less air and oxygen per unit of product.

My containers from Redmond are still alive, but not to say that I use them so actively, film more often. By the way, the Redmond (proficuk) ones are arranged differently - the cover there is not very large in area, because the container itself is vertical and all rounded to distribute the load.

However, in some topic there was a photo where the plastic on the container itself cracked.

[Larissa]

Larissa, Masha in the subject of the joint venture where we buy containers Status wrote a warning
"Very important!
Containers status, it is not recommended to pump out with vacuum equipment of other manufacturers.
Because they are pumping them and cracks can go, for such cases the warranty does not apply.
Tk already had precedents, and then it turned out that the user himself had violated the operating conditions and only found out later

Vacuum tanks Status are provided and there is a mode for emptying containers, a separate mode. The vacuum unit turns itself off when the air is evacuated, it has a limitation, and it does not pump the container.
This is a warning and a recommendation, and there, as you wish.
But it is faster and easier to close the container with a hand pump. And that's a fact! "

[on]

The vacuum unit turns itself off when the air is evacuated, it has a limitation, and it does not pump the container.

Still, I am for the accuracy of the wording. Not "air" but "part of the air". And as soon as this "part" is slightly increased, the plastic deteriorates.

What does "pump over" mean? it onby swinging it is possible to increase the pressure almost indefinitely. A fromswinging - only to minus one atmosphere.

However, God bless them, with those formulations ... who needs it, that Russian language ...
Peace-friendship-chewing gum.

[Bijou]

Bijou, I just quoted the text

[Larissa]

Larissa, Masha in the subject of the joint venture where we buy containers Status wrote a warning
"Very important!
Containers status, it is not recommended to pump out with vacuum equipment of other manufacturers.
Because they are pumping them and cracks can go, for such cases the warranty does not apply.
There were already precedents, and then it turned out that the user himself has violated the operating conditions and only found out later

Vacuum tanks Status are provided and there is a mode for emptying containers, a separate mode. The vacuum unit turns itself off when the air is evacuated, it has a limitation, and it does not pump the container.
This is a warning and a recommendation, and there, as you wish.
But it is faster and easier to close the container with a hand pump. And that's a fact! "

Firstly, Masha wrote this warning after the container was in trouble.
secondly, I repeat that the instructions for the containers do NOT say that you cannot use a vacuum sealer. Then how could I violate the operating conditions?

Larissa, well, this question is not for me, why is it not written in the instructions and why it was written later.
I don't have a vacuum apparatus yet; I use a pump to close containers perfectly.

I do not blame anyone in any way, I just state the fact

[Lariskin]

Well, again, we deal with these containers (((

Lariskin, Larissa, you are a genius! I put in the hose harder and voila! I've already pickled the mushrooms! ))

[korolenok]

korolenok, No, not a genius))) It's just that, on my own fool, I gave a healthy vacuum cleaner for repairs and cried for 3 weeks without it))) And then, having received a new Sigmund kaaak, I was offended as I shoved the tube)))
Bliin, now I sit and think - to pump out the air from the Status containers with Sigmund or not ...

Bliin, now I sit and think - to pump out the air from the Status containers with Sigmund or not ...

Yeah, I'm also thinking, although I haven't even bought it yet

[telez]

Containers status, it is not recommended to pump out with vacuum equipment of other manufacturers.
Maybe they pump them and cracks can go ...

Vacuum tanks Status are provided and there is a mode for emptying containers, a separate mode. The vacuum unit turns itself off when the air is evacuated, it has a limitation, and it does not pump the container.

But WHAT is the difference from the Sigmund status vacuumator? Does it pump out more strongly? After all, the CONTAINER function is also ... In any case, everyone will decide for himself ...But then you cannot use the method of evacuating any screw can in a container from the Status? Then it's a shame ... I already have a round container for 2-3 months, high status, in it I sometimes evacuated screw cans, nothing like, while the container is alive ... Now I bought a rectangular container, I'm very glad. But for me personally, it would be more convenient and faster to close them with a device, and not with a pump ... It's a shame.

Added Sunday 19 Feb 2017 15:57

telez, Larissa, namesake, tell me please, how big was the Status container, which broke from the vacuum cleaner?

[Lariskin]

Lariskin, 3 l. I think maybe that's why it cracked? The lid area is large. In general, I no longer experiment with large ones, I vacuum them with a pump. And the average, in general, too.

Tell me, who knows, are Besser Vacuum corrugated vacuum bags suitable for Caso200?

[Tatiana-Tanya]

Tatiana-Tanya, any bags for a vacuum sealer are suitable for any vacuum sealer if their width does not exceed the allowable specifically for this vacuum sealer. We all use different packages from different manufacturers here. For example, I have packages and rolls of Caso, Zigmund, Status, Redmond, from the Dom-Upak store.

Thank you.

[Tatiana-Tanya]

Tatiana-Tanya, choose the right size and price. Happy search!

Good day! I choose a packer between Redmont 021, GOCHU VAC-470 and Zigmund & Shtain VS-505. HELP PLEASE WITH A CHOICE! Is the GOCHU hose suitable for Zigmund & Shtain VS-505 and Redmont? I really like the caps on Guchi's plates))

Is the GOCHU hose suitable for Zigmund & Shtain

Suitable for Siegmund

I really like the caps on Guchi's plates

I also like it, I use it with pleasure

Is the GOCHU hose suitable for redmounting? I really like the caps on Guchi's plates))

For Redmond - suitable if you remove the tip from the hose. I also use GOCHU caps, but it is more convenient for me to use the Caso Vac20 vacuum unit, to which the GOCHU hose is permanently fixed

After rereading the topic, I chose the Zigmund & Shtain VS-505 Vacuum Sealer. I hope I was not mistaken)) And I will buy the adapter and the Guchi container in Vladivostok.

[Love]

LoveI think you will not regret it! Great packer!

Hello everybody. After all the thought and advice from the forum, I ordered and am already waiting for my caso vc200 vacuum cleaner. I also want vacuum containers. Now the question itself is, will Orved vacuum containers fit the caso vc200?

Good afternoon, I read half of the tips and ordered Redmond 021, there is a good promotion for it now, I hope you made the right choice? On the Redmond website I wanted to immediately take the packages to it, but the price is too expensive, I found vacuum packages on another site Redmond RAM-VB01, the price of 230 rubles, like a normal price? Please tell me, experienced hostesses

230 rubles

And where are these prices?

On the website of the store in St. Petersburg

A reference can be in the l / s?

A reference can be in the l / s?

Please throw off

And please give me a link

Girls, help me decide which is better to take Zigmund & Shtain Kuchen-Profi VS-505 or PROFI COOK PC-VK 1080? She broke her whole head. The price is about the same for me. I read the forum a little and realized that the sigmund is no worse than a pro-fuel, but the bundle is more interesting, besides, it is convenient to store packages in it. Did I understand correctly or did I miss something?