Miloviza
Svetlenki, marriage or external defect in the form of scratches?

Exocat, and cost about 1,500 rubles for about rubles)
Svetlenki
Quote: Miloviza
a marriage or an external defect in the form of scratches?

It wasn't Kitchen, but other devices. But if you explain the reason, which is included in the list for the return (and this is all, except for "the color did not like", roughly speaking), they issue a refund without further ado.
Quote: Miloviza
and cost about 1,500 rubles for about rubles



I apologize for the flood, no more
ledyru
Girls, specialists !!! can you please tell me, I’m sticking to the meat grinder with a screw nozzle
When you enter the card number on Amazon and the whole order appears in red, is the amount together with the delivery?
Svetlenki
Quote: ledyru
the inscription appears in red

Usually such an inscription appears if Amazon does not like something, namely:

1. Do not deliver to the selected address
2. Something has not been entered ...

Rather the first than the second ... American Amazon?

Turn on the google page translation option. It will be clearer ...

Quote: ledyru
in red the whole order is it together with the shipping amount?

The amount with delivery will be one click before the final ordering. Look closely at the right column. There will be a line "Delivery" (Delivery), there may also be "Deposit for duty" (Import fee deposit).
ledyru
Sveta,
Thanks for the answer, I probably did not correctly express the results of the order (translator), etc. everything is black and white Shipping and handling: RUB 2,439.54Whole order: US $ 140.00
Something like this, is this already with delivery in Russia, i.e. all inclusive or without delivery in Russia?
Svetlenki
Tatyana, this is already a delivery to the address that you indicated in the order
ledyru
Sveta, thank you very much!!!! What would I do without you
Miloviza
Quote: Svetlenki
Usually such an inscription appears if Amazon does not like something, namely:
+1
Katrin
Girls, I need your advice. I flipped through 50 pages of the topic, but did not find an answer. Tomorrow I'll finish reading the remaining 30

Which model is more convenient to use: convertible or with a lift?

Do you move the mixer across the counter when you cook, or is it always in the same place?
The fact is that in my kitchen there is a convenient corner for him, but then the mixer will be turned to the wall with the side where it has the speed switch. Will I be able to use it in this position?
Svetlenki
Quote: Katrin
Which model is more convenient to use: convertible or with a lift?

When I studied Kitchens with the 4.8 bowl, I heard more positive opinions about the convertible bowl rather than the lift mechanism. But if you are looking towards the 6-liter pro, then there is no choice. Elevator only
Quote: Katrin
Will I be able to use it in this position?

I wouldn't be comfortable. I sometimes manage to knock down the speed selector when the car is in a normal position, and if the lever was against the wall, I would definitely mow it ... But this is me ... Kitchen's ideal location on the tabletop, if in the corner, then diagonally. Then you will not need to move it at all, only give a place in the back so that the head rises normally.
Katrin
Svetlenki, thanks for the answer. I am considering a 4.8 cup, I do not need a larger volume. Then I'll focus on the reclining top.

But there was a problem with the place for the mixer. I wanted to install it along the wall in the corner, diagonally it is not very convenient, since the place of the working area will be eaten up. It is a pity that there are no models with mirror controls

I also have a practical question.
The height between the worktop and the top cabinets is 60 cm. Is this normal for a convertible mixer?
zoyaaa
I have the simplest model, with a raised nose 48 cm, so it will fit.
caprice23
Quote: Katrin
I wanted to install it along the wall in the corner, diagonally it is not very convenient, since the place of the working area will be eaten
It is not at all difficult to turn it. Do not rearrange, namely rotate. So it may well stand along the wall and only for the duration of the work will you unfold it diagonally.
I constantly turn mine here and there
OlgaGera
Quote: Katrin
but then the mixer will be turned to the wall with the side where it has the speed switch.
I always have it that way. And I use it just like that. I am left-handed. Otherwise, he is not suitable for me)))).
I can already feel the speed with my hand, feel it)))
caprice23
I am also left-handed, but I still spin the mixer))
Katrin
Girls, thank you all for the answers. I think I'll find a place for a mixer.
caprice23
Quote: Katrin
I think I'll find a place for a mixer.
Of course you will, there would be a mixer!
Svetlenki
Katrin, you strongly "do not tie" him to the wall. You will still move to the middle of the countertop. Otherwise, it will be inconvenient to work. Beat the butter until white, you still need to stop the mixer and walk along the walls with a spatula, beat the squirrels, you need to see how they behave there. There is less light near the wall ... Well, it seems to me so ...
Miela
Girls, please tell me if this is within the normal range. In my artisan, when kneading a denser temte, a pin walks around, which is slightly below the mixer head. On his leg that. That is, it comes out. I will correct it and continue to knead. Artisan is working fine. It doesn't seem to affect his work. But is it? Has anyone come across this?
zoyaaa
It happens to me all the time, I push it in place until everything is fine.
Miela
Quote: zoyaaa

It happens to me all the time, I push it in place until everything is fine.

Fuh! So he's not the only one who is so weird.
It just started after about six months of use. I use it every day. Very rarely, when every other day. We don't buy bread. I bake it myself. And cakes for my husband for tea.
caprice23
Do not understand what kind of pin you are talking about?
zoyaaa
A pin to-eye the head is attached to the leg.
babanina-ts
Girls, you need to tighten the screw that is inside the leg, that is, tilt the mixer and tighten it tighter, try it, it should fix the pin exit and the wobbling of the head when kneading hard dough.
Miela
Quote: babanina-ts

Girls, you need to tighten the screw that is inside the leg, that is, tilt the mixer and tighten it tighter, try it, it should fix the pin exit and the wobbling of the head when kneading hard dough.
.

Oooooo !!!! Who bothered you like that ?! This cannot be done !!!
This screw is not for this! It is for adjusting the height of the attachments! If you don’t know, then please don’t give any advice that could disrupt the mixer operation!

[b




Tatyana, turn this screw on your mixer and be surprised when the whisk starts to scratch the bowl. If he starts moving at all.
Svetlenki
Miela, please, specify which pin you are talking about It is best to take a picture or a photo on the Internet to find

Quote: Miela
This screw is not for this! It is for adjusting the height of the attachments!

Yes, that's right. I twisted to the point where a small coin clings once for each circle pass.

The only thing, it seems to me that this position is different for different bowls.But for now it is as it is ...
Miela
Svetlenki,
KitchenAid Mixer




Here he is a bastard).




Svetlenki, my whisk is in perfect position. Therefore, I will not twist anything). But the pin began to walk). Not critical, but strange). When whipping creams and eggs does not walk.
Svetlenki
Quote: Miela
Here he is a bastard)

I didn't even understand at first which part of this photo. She went to look at her. It doesn't happen with me.

I would call the service or representative office and try to consult them. Just describe it clearly so that they immediately understand what kind of screw we are talking about. Like, on the vertical part of the bed, exactly in the middle of the bowl level there is a screw ... And so on ...

But maybe someone else who knows will tell you.
caprice23
And my photo is not loaded. So I did not understand what kind of a pin is so mysterious ...

Oh, now it's loaded. Clear. But I have a mixer without a year for a week, while everything is in order, such cases have not been observed
babanina-ts
Dear, I know what I am writing about. You are new to your mixer. Turn it upside down (or lay it on its side) and there is a screw inside the leg (it is hollow) that will secure the pin that is walking.This is not the screw that adjusts the rim height.
Svetlenki
Quote: babanina-ts
Turn it upside down (or lay it on its side) and there is a screw inside the leg (it is hollow)

babanina-ts, Well, you give! Who would have thought that you were talking about THIS screw For the first time in my life I turned my Kitchen over! Thank you, boom to know!
Miela
babanina-ts, ABOUT! Indeed there is! Thanks for the tip. In my life I would never have guessed to turn it over.
Miela
Eventually. I tightened this screw. Enough for a half batch. And again the same thing.
caprice23
And I finally tried the rubbing yesterday! I am very satisfied. I bought tomatoes in my own juice for pizza and at first I could not figure out how to rub them onto the sauce. Thought to slender, and then through a sieve. I completely forgot about the nozzle, okay I saw it in the cabinet. How great it turns out! Tomato puree separately, skins and seeds separately. The beauty!
KitchenAid Mixer
Miela
caprice23, Wow! What kind of nozzle?
caprice23
Here is such


This is a meat grinder addition
Bes7vetrov
Girls, good day everyone! Throw someone with the maximum discount loyalty card number at me. YOU ARE WELCOME! Now I am processing my husband ... suddenly he will agree, then there will be no time to look.
Svetlenki
Bes7vetrov, Elizabeth, I will keep my fists for you! Listen, what if there are some points in MVideo or any Thank you? Explore all the options.

Good luck!

caprice23, Natasha, great wipe result! And most importantly, there is not much to wash! Does it splash on the sides strongly when it drips down? Or did you have a high capacity, not a plate?

I have no meat grinder and no wiping. But I periodically glance in their direction.
caprice23
Sveta, no, it does not splash at all, it flows down to itself quietly. It flowed into this plate, it was just on my stand)
Here many praised this rub. I think it will be especially useful in the summer when the harvest is trampled




Quote: Svetlenki
I have no meat grinder and no wiping.
I really want to try their new metal meat grinder. She seems to be even more praised. Someone on the forum has it, I forgot who. I would like to compare both, which is better))
Svetlenki
Quote: caprice23
I really want to try their new metal meat grinder.

Before you try it, you have to buy it. And it costs like three (okay, two and a half) plastic But the reviews, yes, enthusiastic.

And suddenly the load on the shaft is greater. Not afraid?
caprice23
Quote: Svetlenki
Not afraid?
I'm afraid. But I want to. Although I don't really want to. Maybe all the same, who will unsubscribe about the meat grinder as it is in business. Maybe you really should want her




NatalyTeo! Here! I remembered who has both plastic and metal grinders)).
Natalia, have you tried it yet?
Bes7vetrov
A caramel apple in the maximum configuration costs 62,000 here, in a German store with delivery UPS 36,000, DHL 32700. Oooooh. How can it not be said that I have such a sum for a rainy day?
Svetlenki
Quote: Bes7vetrov
in a German store with delivery UPS 36000, DHL 32700
Vooot! I wanted to propose, but did not dare! If they serve Kitchen here under warranty, then it is more profitable to take from Europe!
Twig
caprice23, I understood correctly that you have a plastic meat grinder and you still want to get hold of a metal one?
caprice23
Twig, yeah, right
I bought myself a second grater, why not be a second meat grinder
Svetlenki
Twig, Veta, do I remember correctly that you had something with this socket / shaft on which the attachments are attached? And you warned not to overload this nest?
Twig
Svetlenki, yes, that's exactly what it was. And the service was also warned not to tighten the meat grinder too much.
I will disassemble the balcony, if a spare part comes across, I take a picture, they gave it to me as a keepsake.
Svetlenki
Quote: Twig
And the service was also warned not to tighten the meat grinder too much.

Veta, and what was the error in operation? why did it happen?
Twig
The service said from using a meat grinder. I spun a portion of Ivan-tea, I was still happy how well it spins
And I also used a screw juicer before the breakdown.
caprice23
Is the auger juicer a wiper? Or is it a different attachment?

All recipes

New recipe

© Mcooker: best recipes.

map of site

We advise you to read:

Selection and operation of bread makers