Grater Burner (2)

[T. A.]

Knock on Tanya's joint purchases T. A.

[Natali73]

Natali73, look at OZONE.

Thanks for answers. On ozone there is only 10 and 1, 6 inserts.

[Natali73]

Natali73, periodically look there, they happen. I ordered everything there.

4.5 was on Ozone? I think this is from the realm of fantasy. Even the officials never had it, everyone ordered it "from behind the hill".

In "Metro" a special offer for a pike perch from the classics - 199 rubles.

Even the officials never had it, everyone ordered it "from behind the hill".

I bought it for 4.5 in our store, they are Berner's representatives. Now it is not available, I bought the last one in January, so they did not bring it anymore.

In the "Metro" special offer for a pike perch from the classics - 199 rubles.

I was in the metro, there is no such action in Moscow.
I looked at the website in Omsk at this price only in one store, in another, as usual, but there is a vegetable peeler for 150 rubles.
So these are local discounts

I bought it for 4.5 in our store, they are Berner's representatives.

Well, when I was looking, I was nowhere, I had to write out "Is of Kermania". I hardly found the plug-in. Then, however, the officials appeared.

I was in the metro, there is no such action in Moscow.
I looked at the website in Omsk at this price only in one store, in another, as usual, but there is a vegetable peeler for 150 rubles.
So these are local discounts

Maybe I was in one, the other is far away, and in this all week for 199r.

Girls, help, please ... have a question! So far, I want to purchase only two SEPARATE graters Baby-grater and Pizza-grater I don't have a vegetable cutter myself! Do I need a fruit holder (after all, there are no blades) and do I need a cradle. I wanted to ask experienced users for advice

[mamusi,]

mamusi, I use these two graters without a fruit holder.

I use these two graters without a fruit holder

So do I. And it is quite possible to do without a pot with these graters.

[mamusi]

mamusi, you can use it, but carefully. You can still get hurt quite painfully. I call the baby grater “a shark” to myself, it’s enough so that it doesn’t seem a little. The pizza also hurts. I almost don’t use the holder for individual graters. When a piece of fruit becomes a dangerous size, I prick it on a fork.
Sudok is not required.

[Elenka]

Elenka, gala10, Shelena, girls, thanks for the quick answers, then I order these two :-). And then I'll see how it will go ... maybe it will pull for other graters? :-)

[mamusi]

mamusi, will pull necessarily. I have the most requested Carly. I would definitely order right away.

[Elenka]

Elenka, Yes? I'm thinking about it :-). But to her it is certainly better to have a fruit holder, right I understand? I'm VERY prone to injuries in the kitchen ...

Actually, I have already read ALMOST everything .... oh ... just a huge topic :-) :-) :-) :-). Very necessary. You girls are so smart! But I probably pass ... I'm mortally afraid of this Burner ... fsё ... I'll be on my staaaray. I'll just buy myself a plastic grater Pizza-grater and that's it ... I have frequent injuries. Only from the hospital I, however, was seriously injured with a knife, so I got to the operation, 4 fingers on my right hand, and all the tendons chicked. Wait left-handed, so I don’t cook ANYTHING ... and when will it still be that I’ll develop my hand ??? And the fear remained acute ..., advise a good vegetable cutter of another type ... not dangerous, for potatoes, cabbage ... huh? is there something like that?: -): -): -): - I lightly rub cheese, apples, radish, cucumber on my usual tetrahedral with my left hand, or I use a blender, a chopper ...

advise a good vegetable cutter of another type ... not dangerous, for potatoes, cabbage ... huh? is there something like that?

Then too electric vegetable cutter. By the way, the flea market now sells Mulku quite inexpensive.

Yes, with such abilities, only an electric grocery cutter.

[Stafa]

Stafa, gala10, Thank you girls ... so I think that the electric grocery cutter will probably be mine (in my sad case))). Wait on OZONU whispered all in thought ... and find NADA! I need to cook a little like that

Girls, hello everyone! I read your Temka and bought myself a Berner Trend grater, but I didn’t calm down, I ordered a multibox, a box for storing inserts, an insert for 1.6 and 10.
Inserts 3.5 and 7.5 are more than encouraging. But the 1.6 insert gives out some kind of dust (grated carrots for Korean). Does anyone have the same or am I doing something wrong?
On insert 10 at the end of the rubbing, the vegetable (piece) gets stuck between the knives and it is very difficult to pull it out.
I bought the whole set on ozone. The quality is in doubt! Anyone else ordered on Ozone?

But the 1.6 insert gives out some kind of dust (grated carrots for Korean).

Alla, on this insert I rub onions for minced meat, carrots, if necessary, somewhere finely according to the recipe. I have it used, I like it.

And yes, sometimes by the end of the rubbing, a piece gets stuck in the blades, the rest is difficult to pull out. I write it off on my curvature.

I bought graters here in a joint venture from Germany.

Thank you, Taya.
Girls share more your opinion. someone like...?
I saw on another forum how girls rubbed on 1.6. So there the normal bars came out, everything was like a selection, even. And I have only tears
I already thought to return the insert back to ozone, so the packaging is broken

[Alexa ha]

Alexa ha, Alla, rub only in one direction, and not up and down, then the dust does not work.

I do not rub in both directions, but I rub strictly in one direction. It seems to me that the height of the knives is too high. When I run from top to bottom once, only a thin layer of carrots is removed, leaving deep cuts on the main carrot (which is on the holder) from the first time (rubbing). Accordingly, when I spend it again, I cannot direct the carrots along the same trajectory as the first time. It is because of this that trash is obtained.

When I insert insert 1.6 into the grater, I can see with the naked eye that the gap between the insert and the grater is very small, and there is absolutely no gap to the cone of the insert.
Maybe the grater is not original?

Girls, I experimented today with an insert at 1.6. Rubbing an apple. If the insert is not put until the characteristic click, then the straw comes out very even nothing, and if you put it all the way with a click, then you get the real dust. Perhaps for onions in cutlets for a child, this insert will do, but what else can I do with it, I don’t know?

Put it by the cabinet and forget about it.
Unless only then to some friends to brag about ...

Girls, and the white color of the grater is painted from carrots and beets? And how to launder?

Girls, and the thickness of the slices (not straws, but slices) is the same everywhere?
I have a V5, if I'm not mistaken - the maximum thickness is 5 mm. In others, is it the same or is it broader? Ideally, you want 7mm, are there such?

Girls, and the white color of the grater is painted from carrots and beets? And how to launder?

Before using, grease the grater with vegetable oil, after rubbing everything, wash it as usual. If traces remain in some places, wipe with oil again.

Is it just before the first use to wipe or every time?

Before the first one, be sure! And then see for yourself, mine is well wiped off after use. But I only have white "rock", so I don't wear it every day.

Girls who ordered a grater on ozone, do they charge a lot for the shipment? And how is it cheaper by courier or mail?

We have the cheapest courier delivery to the pick-up point. I have not contacted the mail for a long time.

In ozone, if taken from a self-pickup point and if the amount exceeds 2,000 rubles, then 69 rubles. But if the amount is less than 2,000 rubles, then 99 rubles. All other options are much more expensive. So it is better to foresee everything at once, that is, what you need for happiness in the kitchen, and order everything at once, and not like me to pay 2 times per order.

I think the cost of delivery to the pickup point is tied to the region. I have a "status" value of 79 rubles, it is not connected with the order amount, if the weight exceeds five kg (in my opinion), then 125.

Girls thank you all! Only while I was going to ozone Prima ended. What is it for?

I just looked, the green Prima is in stock.

I bought myself today I will take green in the store! I'm very happy! now it remains to buy Carly. We have not had her for a long time. The seller said it may not be already.

Congratulations!
I bought Accept two years after the Trend, I had to get used to it, retrain, but, in general, I really like it!

I'm getting used to it now. The cubes are small. Everyone wrote, but until you try it yourself, you won't understand. I don’t understand where to use them. Share your experience.

I didn’t start making cubes, I don’t need them. Until. And there it will be seen.

And I adapted cubes into the soup for the child to cut potatoes, we are 2 years old, I like

Girls, and the bladeless insert on the trend does not fully snap into place?

It clicks into place for me, holds well, but there is a distance between the knives and the insert.

Natasha, explain in more detail, my bladeless is inserted until it clicks on the shredder, it does not go further, until the closed state, I'm afraid to break, maybe I'm doing something wrong?

Girls, I finally found a use for Box 1.6. I rub carrots and onions on it for overcooking into soup. The size is what you need. Perhaps potato pancakes on this grater will also be wonderful.
Korean carrots are cut by a 3.5 mm insert - just a cool result. The carrots retain their juiciness and crackle just behind the ears. I have cooked in Korean 3 times in a row already, my husband is delighted with such a salad.
A 10 mm insert cuts potatoes into a soup for me. But on the 7 mm insert, you get a very tasty tender and crispy potatoes in a frying pan.
In a word, I was imbued with love for this grater. : girl_love: She's awesome!

Are you talking about a bladeless insert for a stub?

Are you talking about a bladeless insert for a stub?

about the one that comes with the kit, and what else is there?