Grater Burner (2)

[marinastom]

marinastom, thank you, one of these days I'll run to rake, only now the fruit holders on ozone are over, but I need one.

[_Catherine_]

_Catherine_ , here, I tried. Left without a plug-platform. On the right, she put it on the crossbars. On the frame, at the top right, there is a projection on which the thickness is fixed, on the notch site. They don't match in my photo. I hope this is the third thickness.

[azaza]

azaza you see the inquisitive mind marinastom already guessed how))) I really get a gap when I put the insert, between it and the handle, but the principle is the same. Although it is possible and on weight, it is not so difficult, the crossbar will get very lost anyway.

only now the fruit holders on ozone are over, but I need one.

Yes, they seem to be.

Virgo, I'm wrong. This is the same thickness, only the insert is closer to the knife.
it is necessary to try in cutting.

[marinastom]

marinastom try to insert the insert below, so that the edge of the insert rests against the wavy line, as it were, about 1 cm there will be a gap between the handle and the insert - then something like average thickness turns out ...

No, I went and checked it - it doesn't work, either the same thickness or less, but then the product gets stuck on the knives. But she cut the potatoes without an insert at all. No hassle with cutting

Here in the photo on the left - the thickness on the insert in the position of the wave, on the right - the thickness without an insert at all, you can see that it is thicker

🔗

Marin, but then you only have to cut half a pot, if without an insert. When it has already rubbed to the teeth of the holder and you need to move it with a button, then if there is a hole in the back, it is difficult to squeeze out the potato to the required thickness. If there was a bottom there, it would stop the potatoes at the required thickness. I don't know if anyone understood what I wrote here.

Girls! Very much, please, measure and write, please, the dimensions of Prima, otherwise I have not met something anywhere, but I really need

[Mona1]

Mona1 I'm Mata Hari, I often cut on a waffle without a holder (don't repeat after me! This is dangerous!) - I'm not always comfortable on it with the holder, the grating and waves are still back and forth, but when the spirals are needed, everything falls from the holder onto figs and also half of the pot is not cut in the end, remaining incomprehensible pieces. In this case, I am generally silent about radishes or trifles. And with the pens, I carefully, slowly, vigilantly controlling the process and fingers, I cut everything entirely. I have something else - I don't need pieces of such a thickness as without an insert, it hurts a lot in my opinion). Therefore, I usually have enough of what is on the waffle. And thinner is already Prima on a knifeless one. I glance at the wavy Berner knife, but somehow sluggishly)))

Diana on Ozone for Prima it is indicated: Size of the vegetable cutter: 37 cm x 14 cm x 4 cm.

[_Catherine_]

_Catherine_, Do you have a Perekrestok or Pyaterochka store? There you can order a fruit holder.

[Venta]

Venta, thank you very much, it's just that I don't go to ozone at all

[_Catherine_]

_Catherine_, do you have Uuterra shops? There are always fruit-holders (at least with us).

[Ipatiya]

Ipatiya, oh, thanks, I see, I opened the burner section, then they are not there, but there is a search
Mona1, so the vegetable still rests against the diagonal stick and rests, there is no such hole for everything to fail, only carrots or carrot-like potatoes
marinastom, thanks for the photos, now I'll type a bunch of grades for sure
NatalishkaI don't even know, I just don't feel like running separately
gala10, so far everything has been raked out in our uterra, some pots and roco remained, and in general the assortment there is very meager

[_Catherine_]

_Catherine_And what to run on the Internet ordered and that's it. And there is a fruit holder on ozone.

The "Classic" grater has broken.Please help me choose between Prima and Trend.
I mainly use a fine grater to cut vegetables for soups and salads.
Thank you.

[Irina Ekb]

Irina EkbThe main difference between Prima and Trend is in the knifeless insert - in Prima, it gives 4 cutting thicknesses and serves as a plug. The Trend has 2 thicknesses and look for a plug separately. In Prima, knife inserts also have 2 thicknesses of blocks when cutting (this partly compensates for the fact that 1.6 mm inserts cannot be purchased for Prima), Trend has one. Whether it is important to you or not, think about it. By and large, this is a matter of personal preference and price - Prima is a little more expensive.

And I will ask. Girls, I understand correctly, inserts 1.6 mm + 4.5 mm + 10 mm are suitable for the Trend. K Prime only 10 mm. Right?
And more - tell me, in this picture, the knifeless insert lies next to it, but what is in the grater? The plug in the photo looks different, like.


I wanted and wanted I will take it, I wanted it so firmly, and now the throwing begins ...

I bought Prima. Indeed, Prima seems stronger in the hand.
Thanks a lot for the advice Vente!

Tell me, are these graters generally convenient? I just NEVER thought about them, and now salads are my favorite dish, so I need to save some time. Do these graters save time? Or would it take too long to wash and fold them?

And I will ask. Girls, I understand correctly, inserts 1.6 mm + 4.5 mm + 10 mm are suitable for the Trend. K Prime only 10 mm. Right?
And yet - tell me, in this picture, the knifeless insert lies next to it, but what is in the grater? The plug in the photo looks different, like.


I wanted and wanted I will take it, I wanted it so firmly, and now the throwing begins ...

I also chose for a long time, but decided to take it as a result! and if you want Trend, then the cheapest thing I found in the online store "super-graters".

there is a stock there now on Trend.

But Prima is more expensive there than in Germany.

in trend 3 inserts included. and what is the 4th in the photo, I don't know

[olesyaer]

olesyaer, Olesya! These graters OOOOOOOO are very convenient. They save time! Can you cut an onion into small cubes with a knife in 3-4 seconds? Salads are amazingly beautiful and cut the same! How much time will you spend cleaning the knife and board? So much time is needed to wash this grater. Just put it under the tap and rinse off the remnants of vegetables or fruits.

What else can I say - do you love Berner the way I love him?

Svetlana, Berner's user for over 14 years. I also have 2 electric vegetable cutters. Berner - definitely faster and more convenient (I sum up the time for assembling the devices, disassembling, washing and making slices)

And I will ask. Girls, I understand correctly, inserts 1.6 mm + 4.5 mm + 10 mm are suitable for the Trend. K Prime only 10 mm. Right?
And yet - tell me, in this picture, the knifeless insert lies next to it, but what is in the grater? The plug in the photo looks different, like.

Yes, only 10 are additional to Prima, but they are slightly different in size for Trend and Prima, so when buying, look for 10 mm on Prima if you have Prima. And in the photo that you showed, not a plug is inserted there, but a knife-less insert. The one that lies there to the left of the knife, it is just shown by the other side (but when you buy there it will be alone, it was just shown from all sides of it). On one side there are straight stripes (this side gives a thin cut, and the one where the waves on the sides are placed on the other side for thick cutting. But there is no plug here, it is not included in the kit.

By the way, you can buy only a 10 mm insert on Prima, and if the knife from the kit, or the frame suddenly breaks, they are not sold separately. But for the Trend, all spare parts are on sale.

And the right insert in the photo is 1.6 (my favorite), it is not included in the kit. There is another one with one row of teeth - 3.5mm.

[roco]

And I finally did not like 1.6 mm. Although I ordered it from Germany. I tried to rub it, saw that it was not mine and put it in a cupboard. So it lies there. So how anyone. I'm for fine slicing roco I use. This one is awesome for me. I often make Korean carrots on it lately. I have a recipe for Valya valushka-s gave, thank her very much! Here she is in the photo. Nearby is a toothpick to show the size of the cut.

[lron]

lron, in Prima, the 3.5 insert has 2 cutting positions, the first 3.5, and in the second position, the thickness is 2 times less, so the manufacturers of Prima believe that it completely replaces the 1.6 insert

Mona1, what do you have to do with it to break it? If only to get on a grater. And it will break down - a person who is addicted to Berner cannot be stopped from buying a new grater. And there will be new joy and beauty)))

[Mona1]

Mona1, what do you have to do with it to break it? If only to get on a grater. And it will break down - a person who is addicted to Berner cannot be stopped from buying a new grater. And there will be new joy and beauty)))

Well, of course, this is how who will apply. And not necessarily in half mean. The blade may bend or misuse of the holder and its teeth will jag into the main blades. You never know what, it will accidentally fall off the table ... Of course, all of us here are Berner lovers, but the lack of money often stops buying a new grater, it's not cheap, especially if you want other additional graters. For about a year I walked around Temka in circles until I bought the Trend, and all the additional inserts and graters and boxes. So I chose what was more reliable and what, if necessary, could buy an insert spoiled by accident. And there are no such opportunities to buy another vegetable cutter of the same type, no matter how much I love the chopper.

I am using box 1.6 for carrots in salad. Thin feathers look very nice and do not interrupt the taste of other ingredients. Cabbage on a small, knifeless, on it, Crimean onions, cucumber (large knifeless), carrots (1.6), dill. Drizzle with lemon juice (apple cider vinegar), salt and add olive or sunflower oil. You can add green, not very hot peppers (knifeless small) and quarters of thinly sliced ​​lemon (knifeless) to this salad. Tasty, healthy, beautiful.

You can also grate the onion on it and add to the ready-made minced meat.

Girls, please develop my doubts. If I rub on the waffle with a grid, then my fruit holder is located at first, as it should, and during the second pass - as impossible as possible, that is, perpendicular to the correct position. After all, I can spoil both the fruit holder and the grater. So?
And how, then, to make a lattice? In the video, the demonstrator turns the fruit holder, but is this correct?

Gal, yes, that's right. I rubbed like that too. Looks like you can use this grater.

That is, you can not bother about this and not fall into a swoon from turning the fruit holder?

Well, they scared me ... I dreamed about Prima so much and did not think that if the knife breaks, then it will not be bought anywhere.But while it (mmm) only pleases me, I hope it will serve me for many years. And really rinse for two seconds under the tap.

That is, you can not bother about this and not fall into a swoon from turning the fruit holder?

What were you going to do?

Yes, here's another! This is how I put it figuratively.

Gal, you can, I checked. You can take a look yourself. Pull out the pins on the holder to the full and place it on the grater. You will see for yourself that the frame of the grater prevents the teeth of the holder from reaching the blades.

[gala10]

gala10, if the fruit holder is "not correct" for me, then it still touches the limiting ribs on the sides of the grater (that is, does not fall through), so the main thing is to keep it in the center of the grater (along the axis) so that the edge does not slide onto blade. Probably the waffle is the only grater where you can keep it "not right"

[gala10]

gala10, oh, you have already been answered here, while I was running around the kitchen (I have it big)

[_Catherine_]

Girls, thank you very much for your answers!
I don’t bother on this topic anymore!
_Catherine_, it is already good to VOID! Be more simple!

[gala10]

gala10, well

[Mona1]

Mona1 I partially agree - Berner is not the cheapest thing and I am not even a very rich person either. But still, for the price, this is not a new washing machine, refrigerator or new furniture.If something happens, I will find something to save on (the Soviet and perestroika times taught) so that I can buy a grater again. Moreover, this is not some kind of stupidity, but a very necessary and useful thing in the household. And on the other hand, who knows - maybe they will also start selling parts to Prima, or they will suddenly stop selling to Trend - this is how the manufacturer decides which new model will launch in a year or two, how he calculates his economic benefits. And the tendency goes in the direction - so that the new is bought, and not the old one should be replenished, repaired.

gala10 you can also try the holder diagonally, at 45 degrees. As in Prima, cubes are made - it is impossible there perpendicularly (incorrectly), therefore, there is a blowout with a diagonal rotation Type first like this / and then like this \

Hello girls!
Please help me choose:
1) grater "BABY GREATER" or "BABY GREATER" PRIMA.
2) "PIZZA GREATER" or "PIZZA GREATER" TREND or "PIZZA GREATER" PRIMA
What are their differences? How is tinder?

I would be very grateful for your help !!!!

They rub the same way, they differ simply in design.

: girl_wink: And I have recently been very much in demand for a rocco grater, and on carlos I made a salad of white cabbage, smoked kalbaska straws, a bit of turnips. onion and mayonnaise, such deliciousness, my friend thought it was cheese, not cabbage,: girl-th: I haven't tried it yet,: girl_haha: I was wondering what and how it was ... I didn't explain it, not our person, won't understand , I know for sure

Light, and the sausage is also on a grater or by hand, with a knife?

noo, Monochka, sausage with a knife with straws, a very tasty salad, try it, girls, you won't regret it: pard: like nothing special, but tasty, and for a change

I also make this salad. Delicious salad. I put smoked sausage, boiled tongue, or sausages - it's always delicious.

Eh, provoked. here is mom's birthday on Sunday. There is an idea to come to her with just such a salad, in the form of a pot with violets. At one time she was very fond of these violets. Any salad itself, maybe even yours, I'll make it with sausage. And the design is as in the photo. The violets themselves are made from radishes tinted with red cabbage juice. Notice how thin the radish is cut, I think it will be very cool on my Trendy at the thinnest thickness.

Very good! It will be a pity to eat such beauty later.

[Mona1]

Mona1, and the leaves from the violet? It's a pity to cut them out of cabbage?