Grater Burner (2)

But what really caused me an inconvenience was the fact that the grater on the boat goes back and forth. I already held it with my hand in the bowl)) And the bowl, in turn, glides on the table. You need to glue his legs. Maybe I somehow did not put it correctly? My sudoku is a prima, and a grater is a trend.

My primovsky pot does not slide on the table. But I rub on the dining table, and it is covered with oilcloth. And she didn't notice that Roko was crawling on the boat. But I already wrote that I put the court basket not parallel to the body, but across. Truly on my own, sometimes on myself ...
Then someone wrote that the trendy grater fails on the vessel. But I noticed that the frame itself does not completely rest on the vessel from one side. On the one hand, it enters the grooves, and on the other hand, it just barely touches the side of the vessel, just like the Trend graters.
However, due to the rubberized legs and grooves on the frame, it is fixed more firmly.
I personally hold immediately the handle of the grater and the bowl with my fingers from below ... it is very convenient for me and does not crawl.
I like to grate in a bowl ... the table has become clean and due to the streamlined bowl it is very convenient to pour vegetables into the MV bowl.

Yesterday I turned around again. I bought Vienne's scissors, a small knife for peeling potatoes, a magnet for knives and Roco. I thought that Roko was in the Prima style, but, in my opinion, in the Trend style, only cherry-colored, like my Prima. Almost the entire prize is gone! And still not all "Wishlist" bought!

How many bonuses do not give us - everyone will go to optimize devices ...

Thank you! I even cut myself, which I was afraid, and why did not buy this grater. And then I went for a trough to a grater for Korean carrots ... and in our opinion, deviceaholic, I could not resist and bought everything else.

So I feel like it and inject. Hands sometimes walk by themselves Oh, I'm afraid, I'm afraid, but damn it, I want to

So I feel like it and inject. Hands sometimes walk by themselves Oh, I'm afraid, I'm afraid, but, damn it, I want to

Girls, I once tried to use an analogue-plagiarism of Burner - a work of either the near abroad, or a domestic masterpiece ... With a type of holder.
"Thanks" to this experience, I walked by Burner for a long time, rubbed food with my fingers on ordinary graters, did not eat salads that need to be grated, although I love them very much ...

My first purchases of Burner - Rocko, Pizza, pots and holder - all the cheapest, that is, classics. Girls, I DON'T UNDERSTAND why someone risks their tender fingers ?! I feel very comfortable with the holder at once, except that at the very beginning I just hold the carrot with my hand - but not shorter than 10 cm, that is, so that from fingers to grater it is not less than 5. Then I stumble upon the holder.
And, naturally, there is NO danger!

Yesterday I, of course, had some fun with potatoes at 10-ke))) A small part turned out to be tiny plates - here you need to train). But "nothing is impossible! For a person ... with intelligence!" (C) I will master)))

There is no need to be afraid. You just need to remember about TB

And I also want to share. I had the same problem with classic rock as many have - it's hard to wash. And today I just knocked on the pot well, first with one side, then with the other, and ... OH MIRACLE! EVERYTHING fell off the grater, how cute! It remains only to rinse!

[sima]

ABOUT! And I put it like that, I thought that it was only more convenient for me “in the wrong way”. Today I bought gloves with rubberized fingers, tomorrow I will try to rub something in them. I saw that there are also gloves for gardening, they come in small sizes,

sima,! we will rub together "in the wrong way" ... the main thing is so convenient for us
And the gloves are the orange palm and fingers? Mnu have such ... they do not fit my hand tightly

Hello girls!
Well, my Prima came to me today, and the rest of the personal belongings, the sudoku, all the graters, and the boxes will come in a current in a week ...
I tried "Uncle Burner" for dinner, rubbed the onion into the cutlets on 3.5 insert, did not understand, frankly, what kind of mass it turned out, sooo fine, I could not even make out what it was, put it on cubes. The cucumber was popped in circles in 10 seconds, beauty! But I tried to chop the raw smoked sausage into slices, so oh how hotzza can I try everything else. I need to practice my hand on the cubes

Hello everyone, girls! Well, here I also wanted such graters, but while in this business ... layman, advise where to start and where to buy?

I tried "Uncle Burner" for dinner, rubbed the onion into the cutlets on 3.5 inserts, did not understand, to be honest, what kind of mass it turned out, sooo small, I can't even make out what it is,
Girls! How different we are all with our tastes and habits! So when I tried the onion on insert 3.5, it turned out that "what the doctor ordered", only because of this it was worth acquiring Berner. We use little onion, but now I put it everywhere and even get aesthetic pleasure when I cut it on this insert. But at 7 mm, for me there are large blocks, I don't like that at all. I cut fresh cucumbers and turned out not at all for me. I thought about inserting 4.5 mm - it will not duplicate the second position of 7 mm?

I also liked to plan onions on a 3.5 mm grater, that's for us. I cut Chinese cabbage on the Trend cap, I liked it. But for the celery root I did not find the right size among the graters, 3.5 is large, 1.6 is generally bullshit. Since I did not know what exactly I would like, what size would be in use and what kind of grater would suit me, I took everything that they sell.

I also liked to plan onions on a 3.5 mm grater, that's for us. I cut Chinese cabbage on the Trend cap, I liked it. But for the celery root I did not find the right size among the graters, 3.5 is large, 1.6 is generally bullshit. Since I did not know what exactly I would like, what size would be in use and what kind of grater would suit me, I took everything that they sell.

And I liked the celery on Baby from the large side.

Something about Baby did not guess. I'll try next time before I try it at all.

But for the celery root I did not find the right size among the graters, 3.5 is large, 1.6 is generally bullshit.

I root vegetables in a salad on roco tru, me - the very IT! Well, the apple is there too)))

And for the salad, celery and apple on Rocco came to the court. If you want a little longer, a little shorter, the size is optimal.

I am celery, like carrots and beets on 3.5mm borscht ... it suits us. And if for salad, then for Roco
I haven't tried celery on Baby ... scary for the cloves! Root celery is very hard

: girl_claping: how happy I am today - my terechka came home - everything is so beautiful, solid, not like in the classics, thank you very much to everyone who helped to buy such an important thing, Natasha and Tanechka thank you very much for your work

Hello everyone, girls! Well, here I also wanted such graters, but while in this business ... layman, advise where to start and where to buy?

Light, I advise you to visit the office. the website of the representative of Burner in Russia, there you will find useful information, what additional attachments and graters are, they are all different in functionality. There they have delivery all over Russia. You also need a tray and insert box for safe storage.
Here https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&Itemid=&Itemid=217&topic=170448.580 you can see what kind of graters they cut, thanks to the girls! shown in photographs.
Good luck with your choice!

simax, make the first link inactive. Forum prohibits making active links to external addresses

and I have my first serious blood: this: rubbed carrots on Roko, without a holder, and my hand was grated. People who knew, spoke the same, without a holder

I am celery, like carrots and beets on 3.5mm borscht ... it suits us. And if for salad, then for Roco
I haven't tried celery on Baby ... scary for the cloves! Root celery is very hard

No, Nelya, not hard, just a drier vegetable. Rubs great, no worse than carrots.

Yesterday I read someone here that they were rubbing carrots for frying on Baby, the large side. Today I tried it - now that's the only way I'll do it

Yesterday I read someone here that they were rubbing carrots for frying on Baby, the large side. Today I tried -, now this is the only way I will do

I rub carrots on Baby for frying. With the advent of Babik, I threw out the Soviet tetrahedral grater

and I have my first serious blood: this: rubbed carrots on Roko, without a holder, and my hand was grated. They said the same people who know, without a holder of no-no

Natasha, what can I say, no comment. Now you will also tell everyone, without the holder of no-no.

: girl_red: I went to the official site, my eyes ran up, trend, prima, classic ... I don't understand anything .., girls, please advise where to start then all the same

Svetlana, start with this topic. At least from this part of it (there is also the first one) - read it from the very beginning. A lot has already been said about graters - who has what. Moreover, with photographs of the graters themselves, types of cutting, descriptions of which grater-insert cuts how and why. Much attention has also been paid to how the models differ from each other. For example, just recently someone found out what is the difference between Priya and Trend and he was answered in detail.
Where to start is up to you. Here, each housewife has her own requests from the size and design of the grater to the necessary functionality. Everyone likes their own grater) I have Prima, I am very happy, many people here Trend - happy no less)))) Everything is subjective.
Well, perhaps, perhaps, choose the basic set between Trend and Prima, the Classics say it has become bad. Separate graters are another question, the waffle grater in my classic design cuts well.

You can buy in Ozone) I also bought there, I'm happy with everything.

Girls who got the Combi-Chef, how is he to you? Very voluminous? How does it cut? Are you satisfied? Maybe there is a photo of the cuts? And I want to, and inject ...

Girls who got the Combi-Chef, how is he to you? Very voluminous? How does it cut? Are you satisfied? Maybe there is a photo of the cuts? And I want to, and inject ...

It is slightly larger than the usual four-sided grater. While I'm happy with it. The only thing, the finest grater is not very good for me. But I don't really like the "mashed" rub. So, I practically don't use this side. All the other three edges cut perfectly, practically without waste. On a slicer, the shredder is very thin.

Caprice
Could you please post a photo of the cuts in the coming days? It's good that it is not much larger than a regular four-sided grater. For some reason it seemed huge to me. A fine grater will probably be good for potato pancakes? Is the cabbage on the slicer really thin? Rocko and Karlie regular-sized slices?

Girls, I'm sitting upset
Today I chopped a vitamin salad with straws, and this is what I noticed on my "Uncle" ... inserts on Prima 3.5 and 7 in the first position (this is where the straw is drawn) and knifeless on large chunks, do not fit into the frame at all tightly, no click , as they say, and very easily removed right there, in general, absolutely no fixing in this position ... but if it comes off? That is how it should be? and if the grater is turned over, the nafik insert naturally flies out. The rest of the positions are clearly recorded.

Girls, I'm sitting upset
Today I chopped a vitamin salad into strips, and that's what I noticed on my "Uncle" ...inserts in Prima 3.5 and 7 in the first position (this is where the straw is drawn) and knifeless on large chunks, do not fit into the frame at all tightly, no click, as they say, and very easily removed right there, in general, there is absolutely no fixing in this position ... and if it comes off? That is how it should be? and if the grater is turned over, the nafik insert naturally flies out. The rest of the positions are clearly recorded.

It's the same for me. Truly almost every day, nothing jumps off! Do not worry!

[simax]

simax For more than a year on Prima, every day, inserts do not jump off.

You piqued my curiosity - why turn the grater over ?!

I will try to explain how it was ...
I don’t have a trough yet (the order will arrive later), and when I grated the leeks, I planed almost vertically, turned away a little, the grater stood upright, so the insert fell out.Here the knifeless one sits in 1 position a little stronger, because it sinks into the frame.

Caprice
Could you please post a photo of the cuts in the coming days? It's good that it is not much larger than a regular four-sided grater. For some reason it seemed huge to me. A fine grater will probably be good for potato pancakes? Is the cabbage on the slicer really thin? Rocko and Karlie regular-sized slices?

Well, as "not much" ...
See for yourself, something like this, I just took a picture with my mobile phone. For comparison, I put a regular grater next to it.

Here in the photo, just the very small side that I do not like. Rocko and Carly are regular sizes. Slicer - for cabbage, perhaps, it will be thin.
To take a photo of a cut - when I chop - I have no time for pictures, lazy

Girls, I'm sitting upset
Today I chopped a vitamin salad with straws, and this is what I noticed on my "Uncle" ... inserts on Prima 3.5 and 7 in the first position (this is where the straw is drawn) and knifeless on large chunks, do not fit into the frame at all tightly, no click , as they say, and very easily removed right there, in general, absolutely no fixing in this position ... but if it comes off? That is how it should be? and if the grater is turned over, the nafik insert naturally flies out. The rest of the positions are clearly recorded.

Do you press the side button at the same time? When changing the thickness of the cut, you need to press the side button. Then there will be a "click" commit. First, set it to the thickest thread, and then, by pressing the button, change the position of the inserts.

[simax]

simax No more turning away from the grater. The insert fell out, that's okay, but you can accidentally wave your hand in the wrong direction. Regardless of how you have a grater or on a vessel. Take care of yourself.

[Venta]

The fact of the matter is that when you change the thickness of the cut, there are clicks and everything holds perfectly, but at the very first positions of the inserts, when the insert changes, it just fits easily into the frame, even very ... and truncated, no fixing, that's what I was embarrassed, wanted to know the marriage from me or it should be so.

Venta, Thank you! I am neat, just the ray was huge

The fact of the matter is that when you change the thickness of the cut, there are clicks and everything holds perfectly, but at the very first positions of the inserts, when the insert changes, it just fits easily into the frame, even very ... and truncated, no fixing, that's what I was embarrassed, wanted to know the marriage from me or it should be so.

It fits freely into the frame only on the thickest thread. But it doesn't fall out either. You should not try to freely fit into the frame on thinner cuts, then it will be poorly fixed. It is necessary, while pressing the button, to push the insert towards the knife until it clicks into place.

[simax]

simax No, this is not a marriage. On a thick cut, the knifeless lays down freely, although it does not fall out. I fell out now only when I turned it over and shook it very much. The knife is also free in the position of the sticks, but again they do not fall out by themselves, it is necessary that the grater turns over with a specialist. Then they still rest against the slot in the frame with a small tongue on the top, which prevents them from jumping off during operation.
In general, I think that this is a feature of the constructive solution of the grater of this model, just for the ability to switch the thickness of the cut.

[simax]

simax No, this is not a marriage. On a thick cut, the knifeless lays down freely, although it does not fall out. I fell out now only when I turned it over and shook it very much. The knife is also free in the position of the sticks, but again they do not fall out by themselves, it is necessary that the grater turns over with a specialist. Then they still rest against the slot in the frame with a small tongue on the top, which prevents them from jumping off during operation.
In general, I think that this is a feature of the constructive solution of the grater of this model, just for the ability to switch the thickness of the cut.

Marina, and all the girls who responded ... thank you for testing your girls and for calming my soul
But indeed the tongue at the top of the slot in the frame stops the insert a little at 1 position when rubbing while standing, rub exactly no more

[simax]

simax Yes laaadno, I'm standing and rubbing. And I'm not going to buy a pot, I can't horizontally, it's been checked more than once))) I just don't put the grater strictly vertically, always with a slope, a slide. Nothing, everything is rubbed and I'm safe))) Don't be afraid, the main thing here is experience. And safety precautions, of course. Time will pass - you will be an ace of Berner's cutting)))

Marine, I didn’t like it without a trough, I tried to rub it into the container, it’s also not the same, it’s not suitable for the size .... while I collected the fine slices from the board, my hand was already all in the product, reached out to rinse, yes, here the grater tilted at me, and in a sudok, everything would be one or two ... and rubbing on a salad in a bunch. I sit waiting by the sea trough

Yes, I also forgot to ask if someone ordered ozone, is it worth it or not?

I, too, are all in doubt, I counted - it turns out to be more expensive on ozone than on the official website.
I want I will accept with all the bells and whistles + tray + additional insert for 10 + box for inserts + spiral knife + vegetable peeler with a round handle + baby + deco-star = total 4268-at the office. website already with the cost of delivery by Russian post, and on ozone 4400 without delivery ... if the delivery is also counted
I just want to ask, and who else from the office. website ordered? Is it reliable? Otherwise I don't really want to risk such a sum

And I want the same set for the prima and in doubt whether to order in Russia or through Germany

[Matanya]

Matanya Here when how. When I bought it, it was cheaper on Ozone. Again, Ozone offers discounts for holidays or promotions, sometimes free shipping is announced, so you pay only for the goods. When I buy something there, I try to guess.
I didn't buy a berner from the website, so I won't tell you

I just want to ask, and who else from the office. website ordered? Is it reliable? Otherwise I don't really want to risk such a sum

As far as I know, Russian girls ordered both from Ozone and from the office. site. There was no nakhitalov anywhere, otherwise they would have written about it a hundred times in this thread. And you choose where it is more convenient or profitable for you.

I also bought at the office. site and on Ozone. There were no punctures. And now there is a delivery from Ozone to our city to receive it at the delivery point. So shipping became very cheap. And I bought it for the New Year, so the delivery was free and another 500 rubles. as a gift

By the way, on ozone now free delivery of goods from a thousand rubles, although with prepayment by card mastercard or maestro

And they seem to be preparing some kind of pre-crisis price action, but so far I do not see the conditions of the action, such as for the 15th anniversary of ozone

By the way, on ozone now free delivery of goods from a thousand rubles, although with prepayment by card mastercard or maestro

And they seem to be preparing some kind of pre-crisis price action, but so far I do not see the conditions of the action, such as for the 15th anniversary of ozone

Yes, I have already looked, delivery is really free, but still more expensive ...

I, too, are all in doubt, I counted - it turns out to be more expensive on ozone than on the official website.

Now on ozone grater Karli white 400 rubles. worth (orange 500). And at the office. website RUB 575
On ozone, they periodically change the price for different "parts".
I saw the cheapest prices for a burner in the "Our Hypermarket" store in the household section. goods. So, keep in mind!

Well, it happened ... I made an order from the office.site, tomorrow I'll pay and I'll be all waiting
Thank you girls for the advice and in general for Temka, thanks to which I learned about such a miracle.

Girls, at e-5. Burner is even cheaper, and he's real.
I made a request with the officials, and they answered me:

Borner
Good day! the company is our regular wholesale customer, they sell our products.

Girls, and the Germans on the site have a grater that "Powerline Grater" is a type of modified baby grater? only its cost is 393.64 RUB

Made an order on Ozone for a plastic baby grater. It costs 192 rubles. At the office. website 230 rubles.