Philips HR 1659/90 blender cuts (pros and cons)

Rita, I didn’t mean a knife, but a cylindrical attachment (I don’t know what it’s called) On which there is a button to turn on the motor. It also seems to me that the cubes are too big. I also have 69 on which the knife is titanium

Girls, what about 1659 and 1669 cubes as standard in different sizes? In 1659, what is the size of the cubes?

Please give me a link to an Internet store, where you can order an additional 69 lattice smaller.

And one more question: Is it possible to wash the grate, knife, jug, etc. in the dishwasher, excluding, of course, the lid with a motor, which is prohibited to wash?

Girls, what about 1659 and 1669 cubes as standard in different sizes? In 1659, what is the size of the cubes?

They say they are the same
I measured mine
0.9 x 0.9

And one more question: Is it possible to wash the grate, knife, jug, etc. in the dishwasher, excluding, of course, the lid with a motor, which is prohibited to wash?

Probably possible, but not necessary.

Anything is possible (well, except for the top cover), but I would not do a titanium-coated knife.
In general, the instructions say (drawn) what can be washed, what cannot

And in general, if you wash it immediately after use, then it is enough to rinse

girls, tell me how to determine which blender are included in the SET 3 nozzles for cubes ?? what decals do the 1669 models have on the box, how can I explain this miracle to sellers. say yes, take it? I force you to open the box and search, in the end it is not included. they offer to buy an additional set for 4500 separately on order, but there are half of the duplicate things that are already there, I don’t understand anything ... I’ve already traveled the whole city (Rostov) and if I order in the online store they will probably bring them without them

Are there any versions in which all three sizes are included? This is an additional option that is expensive and must be purchased separately!

I have 69 Filya, - there is 1 native lattice. But it is possible to order separately the attachment -PHILIPS HR7968 / 90, consists of 3 sizes.

girls, dearooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo we just have 1669, and sometimes 1669/90, I thought in some of them, I just can't find

For three hours, I rode my breast son around the city and didn't buy anything, because she's a fool !!

how much does the set cost and where to buy it? otherwise I will terrorize people in stores again

oh, and another question. it turns out that one lattice in the additional set duplicates the one that comes with the kit ???

Girls! at the weekend I went specifically to look at the lattice in 1669. Both 1659 and 1669 were available, and so in 1669 the lattice is larger than in 1659 .. And who has already ordered in Kiev? really find?

In 1669, along the outer perimeter of the grid, the size of the "cubes" (in fact, rectangles, not squares) 11x14 mm, there are 16 of them. And inside there are 8 squares measuring 11x11 mm.


I regret that I bought this unit (((I don't even know if it is still possible to hand it over

In 1669, along the outer perimeter of the grid, the size of the "cubes" (in fact, rectangles, not squares) 11x14 mm, there are 16 of them. And inside there are 8 squares measuring 11x11 mm.

I regret that I bought this unit (((I don't even know if it is still possible to hand it over

what else does not suit you besides the size of the cube ?? there is still a twist, there are much more opportunities and cheaper ... maybe it’s not too late to change your mind ...

what else does not suit you besides the size of the cube ?? there is still a twist, there are much more opportunities and cheaper ... maybe it’s not too late to change your mind ...

Yes, I only needed cubes, I have everything else in other devices, and some functions are duplicated repeatedly.
The size of the cubes has killed, and most importantly, the additional three grates are almost like the whole blender!
I was expecting more or something ...
I don’t know, I bought in M-video with delivery and paid by card. To simply change for something, you need to call a courier ... and I have already removed the stickers, although I used it only once.

Yes, I was also unpleasantly surprised when I saw this native grid and tried it in action.
There is a store in St. Petersburg where you can order only one small grid, and not a set of three, well, or any of these three, in general, separately. I read it in the reviews for the model on the market and ordered it.

[dear]

Yes, I was also unpleasantly surprised when I saw this native grid and tried it in action.

As long as I read the topic, no one has ever written that dear the grille is, to put it mildly, unfinished ?!
They just wrote that the cubes are the same size as those of Phillips without replaceable lattices, and I, like a dunya, answered the same to Lisa.

Liza - forgive me, I didn't want to disappoint expectations, we don't have replaceable grilles on sale at all ...
I thought it was included.
I myself also bought Philips just for the sake of cubes, everything else I have in other blenders.

Girls, and I in the store compared the grilles in both models and they were the same, so 1669 was bought and ordered an additional service center. grilles, if I'm not mistaken, then 600r apiece and also squeezers (I don't remember why, because my husband ordered and paid for it himself), you can order whatever you want. If you have a service center, ask them.

And I will most likely take all three (we have not thought of selling separately yet), from a large one you will get interesting cubes for seaming, small ones - basic salads, and triangles - I want such a vinigrette
Tatoshenka, squeezers for them, are they very expensive? Ask your husband? Or, at least the ejector codes

Okay, I'll ask in the evening when he arrives from work
I made vinigret with triangles, such an unusual one. And so I use all the attachments. One squeezer is universal - for large and small. Well, for triangles.

Tatoshenka, and the native ejector is suitable only for the native nozzle, did I understand correctly?

Yes, just for her, now I even went and checked it just in case.

In 1669, along the outer perimeter of the grid, the size of the "cubes" (in fact, rectangles, not squares) 11x14 mm, there are 16 of them. And inside there are 8 squares measuring 11x11 mm.


I regret that I bought this unit (((I don't even know if it is still possible to hand it over

Here are some rubbish! What to do with such cubes?
Sorry, Lisa.

In 1669, along the outer perimeter of the grid, the size of the "cubes" (in fact, rectangles, not squares) 11x14 mm, there are 16 of them. And inside there are 8 squares measuring 11x11 mm.

Judging by the information from Yulina's link in 1669, a medium lattice with 12 mm cubes is installed as standard.
There you can order separately, and not with the whole set, a small grate with 8 mm cubes for 800 rubles, a large grate with 15 mm cubes for 700 rubles, as well as 15 mm triangles for 750 rubles.

You can also buy a whisk, a puree attachment and a milk frother there.

Okay, I'll try to order. And so Vitek, of course, is more profitable and the bowl is larger. (((

I washed it in the PMM and appeared on a large bowl "rays" (cracked) in the center where the metal holder, and everything works fine ... it will break 69 buy

Thank you, now I will wait for the evening

She asked - grilles for 600 rubles, and pushers for 300 rubles.
But my husband said that if you order on the Philips website, it will be cheaper.

Where are these pushers sold? Something I did not find in the orbis shop

Husband bought at a service center

Girls, for mashed potatoes somebody used in 69.? Whisk mashed potatoes well? Is it lush?

Girls, for mashed potatoes somebody used in 69.? Whisk mashed potatoes well? Is it lush?

I'm afraid the puree will turn into a paste at this speed. I have another blender for this.

But there are different speeds?

But there are different speeds?

Elena, for mashed potatoes, you can buy a special attachment for your blender, at the beginning of the topic I posted her photo, so with her the mashed potatoes will be airy, not paste.

The second time was made by Olivier, ... Cubes, of course, are just monsters! (((
We'll have to order additional grilles. In the orb there is 1 small lattice 800r + delivery 400r. it turns out 1200r. for one lattice and 4 slave days for delivery. In the Philips brand store, a set of 3 gratings costs 1,790 rubles, plus delivery of 150 rubles in total - 1940 rubles.
Thus, having paid another 740 rubles, we will have 3 additional bars on the day of order. About pushes nothing is heard anywhere.

My head is spinning, but this unit is definitely not suitable for me with such a size of cubes!

Can you change the model for 59?

So they are no longer for sale ... Especially since I bought in Mvideo, they are definitely not there ...

So they are no longer for sale ... Especially since I bought in Mvideo, they are definitely not there ...

Well then, just add. lattice.

Damn, these cubes came out gold ... The toad chokes cruelly (((where was my head ???

I too am facing a choice. I wanted to take 1669 but it disappeared on the weekend where I wanted to take it. And now I think maybe he doesn't need to but take 1659? I'm only interested in the cubes for the salad. Girls with model 1659. Do you have enough power and the size of the cubes suits? and then I looked at the cubes 1669: girl_cray: this will not work for me! Do you have a Bosch cube cutter? the lattice in 1659 is not bigger in size? And then buy more lattices for 400 grams!

Do you have a Bosch cube cutter?

Boshik has good cubes! But he himself is too big ...

Girls with model 1659. Do you have enough power and size of the cubes?

I have one, cubes are quite suitable - both in Olivier and in other salads, potatoes shredded with such cubes in soup, excellent grater attachments, an excellent submersible blender. For me, all sizes were just right! Very easy to use in any configuration.

I have something with Boshik that did not fuse, only troubles. I bought one of the first in a hurry. The second time I clicked on the tap in the washbasin, it was a plastic pimp that snaps into place. had to order a bowl. then on the new year I turn on does not turn on everything I think burned out. and recently I read about a lid with a blender that I need to keep it turned on and it started working, so I pushed a piece of sausage with a pusher from another harvester with a pusher and broke off in half of the plastics, and the price is almost a new harvester now I decide whether to buy this attachment for 950 grams or pay extra and buy this blender. Moreover, in Boch, he also rubs a whisk for proteins (for 2 r I drilled almost to the holes) now I need your help which model to take 1659 or 1669? and is not spent on these lattices. there is still a difference what? power is not enough?, or is there a titanium knife sharper? although I will not crush the ice there!

I have one, cubes are quite suitable - both in Olivier and in other salads, potatoes shredded with such cubes in soup, excellent grater attachments, an excellent submersible blender. For me, all sizes were just right! Very easy to use in any configuration.

I also have 1659, for more than a year, everything suits me.

Thank you ! probably I will order 1659 and not fool around with the grates, otherwise my salads are hefty expensive, given my experience with Boshik, I prepared 2-3 times a salad and 2 r biscuit if my husband found out the price of these salads probably no longer when he asked for them

I have 1659 too! I am very happy with him so far, although she appeared with me quite recently. Cubes are what you need. The set of grilles tempts, but there are no covers where to insert them. But all the other add. I ordered the accessories, they promise in about a week: a potato grinder, a whisk and a large chopper.

girls watched your blender video ..and saw the Kenwood meat grinder which cuts into cubes .. and on our site there is such a Temka about such a meat grinder?

I have 1659 too! I am very happy with him so far, although she appeared with me quite recently. Cubes are what you need. The set of grilles tempts, but there are no covers where to insert them. But all the other add. I ordered the accessories, they promise in about a week: a potato grinder, a whisk and a large chopper.

Oh, but about the big grinder of impressions, write how you get it, I'm waiting for the whisk too, but I didn't find a lid for the grates, but where did you see it?

There is also a Mulinex meat grinder, also with cubes, I also saw Bosch, not 5529, a new model, also with cubes.

There is also a Mulinex meat grinder, also with cubes, I also saw Bosch, not 5529, a new model, also with cubes.

I was disappointed in the blendars .. not so long ago I bought my own .. and that's all .. you can throw out the whipping attachment .. everything is plastic

I decided to hand over mine, I have a Kenwood meat grinder, to which you can buy a nozzle for cubes, the issue price is 3500-4000 rubles. Or buy Vitek a cube cutter for the same money.
Still, 1659 is better because the set comes with a normal-sized grill, and in 1669 they put p *** com so that they buy additional grilles and spend more money ...

Oh, but about the big grinder of impressions, write how you get it, I'm waiting for the whisk too, but I didn't find a lid for the grates, but where did you see it?

There are no covers for the grilles anywhere, you read my message a little inattentively. In general, they said that you need to go to the service center for it, but I think it will cost half a blender. And in our city, the service center is, to put it mildly, useless, it is almost impossible to wait for something, I have already encountered it, then I decided that for now I will manage, the size of the cubes suits me.

if only a chopping knife in a large (main) bowl like in Philips HR 1377 ... mmm a dream ... girls can anyone know if you buy it separately, will it fit the 59th filipka?