Philips HR 1659/90 blender cuts (pros and cons)

So redleafa says her cabbage is stuck.

Well, at least do something with me, again ran to the kitchen. I DO NOT open ANYTHING when my leg is inserted - not a lid, not a cube cutter, not together, not separately. And not even plugged into an outlet. How! Everything, I reached the handle

[Maxxtro PRO PWS-05K]

5 sockets with 5 buttons!

Maxxtro PRO PWS-05K

I haven’t even seen one, I’ll find - buy, enlightened. Thank you

So you're in luck. But I am not in any way uncomfortable with the fact that the lid opens easily even with the bowl.

In general, I so understood that for some reason our devices work differently ... probably it really depends on the assembly ... Thanks SSvetik, I wrote, otherwise I thought that I was the only one) So far it doesn’t bother me, I just think about the future so that over time, during work, it does not go off at all ... At first I was scared that during work, if the bowl suddenly opens, it can hurt, but my husband explained that the cutter nozzle with the lid is fixed tightly, so nothing will happen) You are really lucky who is fixed tightly and not possible to open during operation, all the same it is safety ... But I do not want to return the blender, I have already managed to love it very much)))

Alesya, what is your model of 1669 or 1659 filipoks?

Alesya, what is your model of 1669 or 1659 filipoks?

I have 1659, I wanted to order 1669, but in Ukraine neither in stores nor on websites it is yet ... I called Philips, they said that it was not known whether there would be a supply of this model to Ukraine at all

And I was also waiting for him ... It's a shame how ...
But I will hope that it will appear. Philips plans to sell TV production to Funai and expand production of household appliances.

[Olex,]

I called Philips, they said that it is not known whether there will be a supply of this model to Ukraine at all

Olex, no, I can say that at one time I was told about Philips HR 1659/90 in Ukraine in the same way (it appeared earlier in Russia).

Yes, I am also sure that there will also be a supply to Ukraine, it's in their interests, only it will be in half a year somewhere ... And I already can't stand it))) The baby is small, we need to make all kinds of puree))) I wish I had time, I would also wait for model 1669, since there is already a corolla and a potato maker, and most importantly, that power is more - 750 W !!! So girls, if you are in no hurry, then wait))) And you will be happy)))

I will definitely wait (especially with a bunch of all sorts of cubes) In the meantime, I bought a Philips HR 1653 - a blender leg,
whisk for whipping,
shredder,
milk frother, though with the latter I can't do anything_ probably too fat milk.

But I just want to ask you about the nozzle for mashed potatoes, you can order it for my 1659, but I just don’t know how it works, what kind of mashed potatoes after it? Doesn't it turn out like a paste? I used to beat it with an ordinary mixer - it turned out very airy))) And in the service where I asked about the nozzle, they said that the puree is not airy, but very sticky ... And they say that all the accessories in Philips are expensive and wait a month ... I broke down (((. In general, girls who have 1669 (there seems to be such a nozzle it comes in the kit), tell me, is it worth buying this nozzle ??

But I just want to ask you about the nozzle for mashed potatoes, you can order it for my 1659, but I just don’t know how it works, what kind of mashed potatoes after it? Doesn't it turn out like a paste? I used to beat it with an ordinary mixer - it turned out very airy))) And in the service where I asked about the nozzle, they said that the puree is not airy, but very sticky ... And they say that all the accessories in Philips are expensive and wait a month ... I broke (((. In general, girls who have 1669 (there seems to be such a nozzle it comes in the kit)) tell me, is it worth buying this nozzle ??

I have 1659, in the summer I ordered a nozzle of mashed potatoes in it, it turns out airy puree, the same as in Kenwood 724.

But I just want to ask you about the nozzle for mashed potatoes, you can order it for my 1659, but I just don’t know how it works, what kind of mashed potatoes after it? Doesn't it turn out like a paste? I used to beat it with an ordinary mixer - it turned out very airy))) And in the service where I asked about the nozzle, they said that the puree is not airy, but very sticky ... And they say that all the accessories in Philips are expensive and wait a month ... I broke (((. In general, girls who have 1669 (there seems to be such a nozzle it comes in the kit)) tell me, is it worth buying this nozzle ??

The puree made with the puree attachment will never look like a paste. The paste is obtained by mashed potatoes with a regular nozzle.

I have 1659, in the summer I ordered a nozzle of mashed potatoes in it, it turns out airy puree, the same as in Kenwood 724.

Tell me how much did you pay for the attachment? And I also saw mashed potatoes on mixers and some combines, where they are much wider than on blenders, which ones are better? Maybe it's easier to buy a mixer with a puree attachment ???

Does anyone know a good mixer with a puree attachment?

Does anyone know a good mixer with a puree attachment?

Kenwood 724, Philips 1616, there is some other moulinex, but I don't know the number.

Girls hello everyone!
Today I bought Philips 1669. To be honest, I was upset, for some reason I thought that for more than 200 dollars I would not find anything to complain about. I'll start with the fact that the main cover into which the leg is inserted from below with two kotsalki, rather factory ones, when the plastic flows closer to the hole, in this place, irregularities visible to the eye are felt slightly with fingers. The rubber at the bottom of the main bowl is somehow worn and stains the table with black.
I also noticed that the chopping knife that descends along the axis does not reach the very bottom of the bowl, about 1 cm remains and it (the knife) does not sit firmly, but as if it walks to the right / left. Also, the lid from this bowl, it does not close the bowl for me, but, as it were, is slightly open. I looked, there is a spring in the lid, when you press on the lid it closes, as soon as you let go the lid rises. Girl, please see who has model 1669, also with a knife and a lid? Or did I get married

And before making an order, I asked the operator why the price is different for this model of blenders, they told me that different manufacturers, Hungary is more expensive, Malaysia is cheaper. I took the one that is more expensive, Hungary is indicated on the box, Poland is written on the blender leg
Cheto, I was so upset. I cooked vegetables, and now I think I can give it back to me ... And cut it on a neiser. They advised Vitek, but I don’t trust this company, it seems to me that the engine will die in a couple of months on Vitka

Today I took my filipka from the service, replaced the large lid with a new one, already threshed a bowl of vinaigrette, cut raw vegetables, the tests were successful, everything works (TTT). Now this lid closes very easily, with minimal effort, not like before.

Congratulations! And mine no longer want vinaigrette, and they don't want Olivier .... Where am I now with cubes?

A behold

Now I only add potatoes and carrots to the soup. Vegetable stew, sabzhi too.

Good day everyone! I want to thank everyone for their help in choosing, I read the whole topic from cover to cover. I really wanted a cube, I was choosing between Bosch and sirloin. It was problematic due to the fact that I have a harvester, albeit an old one and a blender, so I was "rushing between smart and beautiful". Moreover, in addition, there are more nozzles in the bosha and it cost us 1.5 thousand less than the filly. Of course, the file won, most of all due to the fact that you can order a different size of the cube.Now I tested it, cooked borscht, I liked the shredder, the cabbage turned out to be what I needed, but the grater seemed dull to me (it's just that carrots and beets flies with a bang on the combine, but efforts were needed here), but the size of the grater is good. Luchek grinded in a mill, it turned out not bad. I'll make a vinaigrette for dinner, then I'll evaluate the cube.
redleafa I also do not open the lid when the leg is inserted, when I take it off, then no problem.
Freken Bock, a special thank you for the recipe, I also looked at someone's vegetable stew with a cube, but your potatoes moved mine from a dead place, then I just periodically wanted, for example, NG or DR, to cut salads, and then I forgot, until next holidays.

Hello, Enchanted! : hi: Yesterday they brought me a 1669 blender, I looked, I also have a knife that does not reach the chopper and the lid does not fit tightly without a leg. I can't say anything about rubber, because my countertop is a crumb of black marble, which is invisible on it. I already wrote, I didn’t like the grater, it’s dull.
Yesterday I cut the vinaigrette, the vegetables were raw (then I steam them in a multitool at the same time as the beans, the beans are cooked at the bottom), it cuts very well, quickly, very sharp knives, only I read somewhere that this blend leaves no waste at all, I had a little cabbage left on the shredder, there were more carrots and beets left, as in the combine, but the last layer remained on the cube, I squeezed it out and cut it along the cuts with a knife. In general, I'm happy.
I didn't dare to take Vitka either, although there was a temptation (let the owners of this device forgive me), just the godfather came to visit when I was tormented by a choice and she categorically said: "Don't even think ... it's better to take nothing then ..."

And sho carried me into this Temko .... Now I want such a device !!!
And all the holidays have passed ... But now I firmly know which gift to order

Take with titanium knife. And a little bit of non-shredded and not cut waste from vegetables from above will still remain with any combine. Even on a hand grater, it remains, then you cut it with a knife.

If possible, then of course, take it. I ordered another extra. lattice, as they say for all occasions, now without him, as without hands. I shred the soups-borscht on it and the main courses, only I would advise taking 1669, he also has a titanium knife, and there is a possibility of replacing the gratings, in 1659 they do not change, and the grate attached to it is large for Olivier.

Girls, dear ones, who have already taken 1669, please tell me:
- What size shredder is included? how many are useful?
- what size grille is included?
- Is there a hand blender too? ... in the photo, for some reason ...


And then the complete information is not on the sites ... And I already lit up with cubes. But you also need a chopper, there are two goals - to chop poppy seeds, nuts into baked goods and make minced meat for a liver cake.

I will be very grateful for the answers !!!

There is a submersible blender, the size of the cubes is about 10x10, you can grind cheese and nuts in a mill, but it will be too small for meat - in my opinion, only 200 grams at a time.

There is a submersible blender, the size of the cubes is about 10x10, you can grind cheese and nuts in a mill, but it will be too small for meat - in my opinion, only 200 grams at a time.

Thanks for the answer!!!
Are the cubes for Olivier and okroshka too big?
Is the grille the same as in 1659 or more?

They have the same grilles, but in 69 models it is possible to order an additional one. lattices - there is a large cube, a small one and a triangle.

Yes, I forgot to write - his own lattice is too big for Olivier.

[9x9]

the size of the cubes is about 10x10

If the size of the cubes is the same in both models, then I will clarify:
- the cells in the lattice are not centimeter-long, but 9x9 mm

When you cut raw vegetables on such a grid, and then steam them, then the cubes in the end are even less.

They have the same grilles, but in 69 models it is possible to order an additional one. lattices - there is a large cube, a small one and a triangle.

Unfortunately, they cannot be ordered in Ukraine ...

Yes, I forgot to write - his own lattice is too big for Olivier.

In the online store, I found in the reviews that 1669 had a larger grille than 1659. And I doubted ...
If I can't buy a smaller grill, what kind of Olivier will it be ...

Thanks for the help!

[9x9]

If the size of the cubes is the same in both models, then I will clarify:
- the cells in the lattice are not centimeter-long, but 9x9 mm

When you cut raw vegetables on such a grid, and then steam them, then the cubes in the end are even less.

This is how 9 * 9 mm seems to suit me, but already 1 * 1 cm is kind of a bit too much ...
And the steamer in my cartoon is very small, and I cook Olivier with vinaigrette in basins ...
Is that cook in parts, all separately.

Indeed, 9x9 cubes. True, after mixing, they somehow become smaller. The size suits me both for Olivier and for vinaigrette.

Already, I was looking for the code HR7968 / 90 -grids 3 pcs. I've already seen it in several stores.
-------------------
Yes. I'm with a new thing too
True, the husband is surprised - there is a harvester ..., and he loves salads in large quantities

This link says that they are suitable for both models, I have 1659, but the grille is not removable, I don’t understand how they can fit.

Congratulations! And mine no longer want vinaigrette, and they don't want Olivier .... Where am I now with cubes?

in a restaurant with cubes, fruit salads with yogurt or champagne - a nice thing.

This link says that they are suitable for both models, I have 1659, but the grille is not removable, I don’t understand how they can fit.

No, only for 1669. But you can order a disc in the service center where the grilles are inserted, that is, a plastic disc from 1669 and get what you want

No, only for 1669. But you can order a disc in the service center where the grilles are inserted, that is, a plastic disc from 1669 and get what you want

The price of this attachment is half the cost of a blender ....

Maybe someone from Belarus will tell you where you can buy additional attachments for the Philips HR 1669/90 Blender in Belarus, a dicing kit. I saw only on Russian sites on Ukrainian ones.

Is it expensive to order from Russia?

I tried to place an order on the Russian site, but they send only to Russia

I also tried to place an order on Ukrainian and Russian sites, but alas, they do not want to send it to Belarus. Now I turned to the Philips service center, but until they answered me, they only said that they would find out and call back

Today I tried the option of cutting raw vegetables into cubes and then boiling them. Subsequent cooling is still required, but less time. The cubes are very even, but their size is still large. I don't understand why they wrote here that after cooking the size will decrease, in my opinion, nothing has decreased.

Today I tried the option of cutting raw vegetables into cubes and then boiling them. Subsequent cooling is still required, but less time. The cubes are very even, but their size is still large. I don't understand why they wrote here that after cooking the size will decrease, in my opinion, nothing has decreased.

The solution to the problem with the size of the cubes is to purchase additional. small lattice.

The cubes are very even, but their size is still large.

This is most likely an amateur. Someone thinks the cubes are large, someone just right, as, apparently, and the manufacturers of this blender. I am very happy with the size for Olivier and other dishes. I cut all the vegetables raw, and then in a double boiler until tender, cool down and already collect salads.
And so, of course, only the purchase of an additional grid will solve the problem with the size of the cubes.

For other dishes, cubes suit me very much. For example, I recently cut 4 bananas, 3 kiwi, 1 apple, poured it with whipped curd mass, added dried apricots and honey, ground nuts. The children really liked it.For adults, it is better to soak dried apricots in cognac, season with whipped cream.

The girls bought today Phillips who cuts into a cube and it doesn't even work to put a nozzle that turns the knives to cut into a cube. I did not find detailed illustrations in the passport, and it is not written in Russian either. Can someone tell me how to do this or give a link to the video. Please urgently, otherwise your husband is already grumbling about what you bought, there are not enough spare parts, bring it back to the store

My husband, when I was so upset myself (everything was gone ... everything was gone, the boss), he took a large drawing, looked at it, then at the lids there was a bunch of all kinds of squiggles on the basis for fixing. Showed me half-thought. The main thing is to get exactly into the grooves, the first time I was also confused, and now automatically - the main movement is to turn the lid carefully behind, or counterclockwise, until it is fixed or vice versa.
And the knife can be easily put on, only with the inscription of Filya - upwards, otherwise she was also afraid that she was defective.
---------
As for the purchase, I'm pretty horrified, like vegetables for borscht, easy and super fast (compared to hands).
I made shortbread dough-class, and cubes are generally a song, now I'm thinking about a set of lattices, since my own is too big (I have 69)

Svetlana, there is no need to put any attachments in order to twist the dice knife. You are confusing something. Consider the diagram carefully. The knife is inside two halves. The knife must be placed with the inscription upwards on the short nozzle inside the lower half.

Thank you very much for your prompt reply. Gathered chopped sausage, cucumber, onion. waiting for the potatoes and carrots to cool