Blender

strange, my leg mayonnaise turns out even without eggs, with milk, the power of the leg is 150 watts. though not the first time, but you can figure it out)

But this, please, in more detail ...

Who can tell about such a "beast" - Bamix MW120 Magic?

Denis, there is a whole topic about Bamiks https://Mcooker-enn.tomathouse.com/in...=com_smf&topic=177112.260

Denis, there is a whole topic about Bamiks https://Mcooker-enn.tomathouse.com/in...=com_smf&topic=177112.260

After I saw

Good evening!
Please tell me what is the fundamental difference between the Braun MR 530 Baby Blender and the Braun MR 530 Sauce Blender?
Was in the store - the consultant did not give a convincing explanation. On the Internet - nothing, on the Braun website did not find this model at all ?!

Thank you!

It turned out only in the classical way, pouring oil in a teaspoon)) And before that, I got used to covering the egg in oil with my foot without unnecessary dancing with a tambourine and in 1 minute. But with milk, I did not succeed so quickly and easily, perhaps due to the low power of the blender.

My Bosch hand blender has a broken whisk. It was turned on without a gearbox and it seemed to "open up", the intertwined wires parted in different directions. The question is, it can be assembled, returned to its normal, working form. Or looking for a new whisk to replace?

Pull the loose ends together. Spoon them with tin with soldering acid (in almost any shop, ~ 30 rubles per bubble). Here's one. But it also happens in a glass vial.

It is applied to a heated surface with a brush and immediately with a soldering iron. Safe for the skin. Then wrap them with a thin wire for reinforcement and solder on top of it.
Will stick and work if you don't push hard. And mix not very thick-viscous. (Marshmallows, for example, are unlikely to be whipped up.)

If you yourself do not know how to solder, ask someone with experience.

[Countryman]

Countryman, Thank you!
I have already called the service - they do not repair the corollas, only buy a new one. And it costs half of the cost of the entire blender So I will try to fix it according to your instructions

Are we talking about serious stationary blenders somewhere?
Turnovers from 16,000 and more.

I want this

Are we talking about serious stationary blenders somewhere?
Turnovers from 16,000 and more.

I want this

Answer me as a specialist in Kenwood: in my 724 (which with a potato grinder) my chopper-bowl broke. Empty twists, but only buzzes with the product. Is it being renovated? And where? Or spit and look for another option?

Tell me how the special chopper-bowl broke. Empty twists, but only buzzes with the product. Is it being renovated? And where?

Does the "leg" grind food normally? Or, too, "just buzzes" !?

Answer me as a specialist in Kenwood: in my 724 (which with a potato grinder) my chopper-bowl broke. Empty twists, but only buzzes with the product. Is it being renovated? And where? Or spit and look for another option?

Аnna1957, the gearbox broke in the shredder cover, I had this, I already wrote in this thread earlier. This cover was changed for me under warranty. And so, in the service you can buy.

Аnna1957, the gearbox broke in the shredder cover, I had this, I already wrote in this thread earlier. This cover was changed for me under warranty. And so, in the service you can buy.

ATP, this is an option. I would also like to know where in St. Petersburg we have this service for Kenwoods. I will look.

Does the "leg" grind food normally? Or, too, "just buzzes" !?

The leg is normal.

Girls, I need advice. I have a BOSCH MSM 66150 ErgoMixx blender


So that's it. The shredder cover must not be washed. Well, how can you not wash if all sorts of products are crushed, whipped up (greens, meat, nuts, cottage cheese, etc.), so you have to wash and water gets inside through a rotating shaft. It remains there and rusts, and the next time it gets into products. Who copes with this trouble

I'm tired of choosing, thinking and guessing which blender is better. I bought a Kenwood HB 713 R blender. I did not find a picture of this particular model in the Internet.As in this photo, only without a whisk. I haven't tested the potato maker yet, but the blender itself is good, the buttons are comfortable and comfortable in the hand.

All . My blender made me live long. Used so many times - the fingers of one hand are enough to count.

[Girls]

Girls, to everyone who, like me, dreams of a blender with a potato machine, I recommend looking at this model: Blender POLARIS PHB 0417
There is now an action for him in Eldorado. In their online store this blender cost me 773 rubles today.
Made mashed potatoes - lovely !!!
Recommend.

All . My blender made me live long. Used so many times - the fingers of one hand are enough to count.

Taya, I sympathize!
I have 724, I have been using it in the tail and mane for a year now, I am very happy.
But when I bought I was warned that the turbo mode needs
use very limited, but it is better not to touch it at all ...
I have never used it yet, I just don't see the point ...
Its five speeds are enough for me.

In three months, I tried to use the turbo button only once - and burned out in 30 seconds. Accidentally timed the time.
I think they put it on ... at all?

I don't understand the essence of this button either ...

[Tata]

Girls, I need advice. I have a BOSCH MSM 66150 ErgoMixx blender
So that's it. The shredder cover must not be washed. Well, how can you not wash if all sorts of products are crushed, whipped up (greens, meat, nuts, cottage cheese, etc.), so you have to wash and water gets inside through a rotating shaft. It remains there and rusts, and the next time it gets into products. Who copes with this trouble

Tata , I have a similar blender. I use the chopper regularly. The cover of mine is neat only the lower part, so that water does not get on the upper part. Then I dry it and everything is OK!

There's a blender in Epicenter. Power 800 and two knives, the photo shows ..

thanks to Tanya, now I am with a new thing - the bowl is too small, but powerful knives ground a kilogram of pork in 3 approaches (in parts). Finely chopped onions, nuts. takes up little space.

[Lily]

The cover of mine is neatly only the lower part, so that water does not get on the upper part. Then I dry it and everything is OK!

Lily I also wash only the lower part, with a sponge not under running water, but it still flows through the slot of the plastic screw inward. In fact, a small amount should dry out, especially with not frequent use, but it infection it splashes into the product with rusty drops. Before that, there was a Brown blender (he ordered me to live a long time, I think because of kneading noodle dough), everything is done in the mind, everything is washed. I bought Bosch cheaper and, as they say, the miser pays twice.

Before that, there was a Brown blender (ordered to live long, I think because of kneading noodle dough)

I also screwed up one blender, kneading dough for noodles, but there was a power of 300 watts. Now I have all blenders of 700 watts and above.

In three months, I tried to use the turbo button only 1 time - and burned out in 30 seconds.

I have been using the Turbo button often and not for the first year, everything seems to be fine. What power did the blender have?

But when I bought I was warned that the turbo mode needs
use very limited, but it is better not to touch it at all ...

But this is the first time I've heard about this ...

I don't understand the essence of this button either ...

For short impulse operation when cutting hard products. For example, onions. For uniformity. So that after switching on, all the pieces had time to settle down again. Then there will be a uniform cutting, otherwise, during continuous operation, part of the product will turn into porridge, and part has not yet been cut.

Now Steba has released a new blender based on Bamix, similar, I really liked it, but I don't know the price ..

The quality of someone else to find out. Something at Shteba lately there are a lot of new products. Either they were simply not on the site, or they were "broken through" to release new products. I would not like the second - they will not have time to bring all the products to mind. Look how many pressure cookers have already been released without changes, because it went well ...
It is very alarming when a company has too many new products. In the pursuit of profit, you don't always care about quality before you try it out.

In St. Petersburg, submersible blenders from South Korea are sold with excellent performance.
One 7t p, the other 8t p.
I am completely happy with my 724 - otherwise I would have bought one of them
One Tokebi 8000 Professional Hand Blender
Second - Hand Blender Mixer A-MIX
Tokebi is very pretty and nice.
And the mix is ​​like a bamix - only at a more humane price,

Now Steba has released a new blender based on Bamix, similar, I really liked it, but I don't know the price ..

Nice, the price in Ukraine is 662 UAH. I did not find any sales in Russia, the status is "expected"

🔗

Dear forum users! Your help is very necessary! My husband brought a blender BOSCH MSM 66155 with a potato machine. I have never owned a blender. I carefully studied the instructions. And I have questions - turbo-speed button. It is written that it is used for a universal grinder. What does it mean? Chopper use only with this button on the other you cannot ? Next, I read the preparation of mayonnaise - a hand blender .... and turn on the turbo speed. I read more horror stories about turbo mode. Is it possible to make mayonnaise not on turbo mode. If yes - what speed to choose them there 12.

[lana19]

lana19, it's okay, you'll figure it out. In the universal grinder, use the turbo button to grind solid products, a few "turbo whacks" and you're done, and the other button can also be used in the grinder when grinding something softer - cheese, cottage cheese, chicken fillet, etc. Any speed, start from the middle position, you will see how it grinds, if that - add. Also with mayonnaise, it whips up so quickly that nothing happens to the blender in a few seconds of using the turbo mode, after all, the blender is designed for this. The main thing is not to load a lot of products, usually in the booklet there are recommendations for the maximum loading of products. And what is its power?

[AnastasiaK]

AnastasiaK, Thank you! Power 600

The power is rather big (I have 700), so follow the instructions and everything will be in order - usually it says to work for a few seconds continuously, then take a break and you can further grind. In general, the blender is a great helper, everything is very quick and convenient - a little minced meat (preferably from slightly frozen meat), minced onions, grated carrots, potatoes, nuts, mashed potatoes, mashed potatoes itself (you have a potato grinder! I don't have) ... Here on the forum there is even a recipe for dumplings in the grinder in 21 seconds! Chopped dough! And you can't list everything. Good luck with learning!

sorry for getting into your girl group, I decided to share my joy from buying a blender ... maybe someone will come in handy
I bought a Vitka (VITEK VT 1480), it was already discussed earlier ... but now I decided to bring my own spoon of tar or honey (you judge).
Before buying, I read a lot of reviews and descriptions of all sorts of blenders, well, I came to the conclusion that absolutely everything breaks: both mulinexes and phillips, etc. So how do you run into it, I thought and took the side of an incredible combination of functions at a democratic price (bought for 3650 in the online store Eldorado) is not an advertisement, I focused your attention on the place of purchase, because when I came to the store itself to pick it up, I walked through the rows and saw it on the shelf for 5200, so it is much more profitable to buy on the internet)))
Well, to the point, I will not enumerate its functionality, who are interested in reading it, I will tell you what I managed to use for almost a month of ownership.
Well, with an ordinary foot (metal), I beat mayonnaise 10 times already, chopped onion and meat in a small bowl, everything in 2-3 seconds and it's ready.
In a large bowl I chopped Bulgarian pepper and a lot of onions, too, chopped cabbage, sausage and different vegetables, everything flawlessly
Well, the main miracle, I want to dwell on the cat in more detail - cube cutter
Guests arrived and I decided to make a lot of Olivier salad. I will say this, - of course it’s just kabzdets .... cooking, cleaning took dozens of times more time than preparing a salad, even a pusher was not needed, it perfectly “swallows” everything by itself, and in 3 minutes a mountain of vegetables consisting of quite itself and not large (as many say) cubes. When I first saw the diameter of the lattice, I also thought that the cubes would not be to my liking, and then from the result I realized that everything is very satisfactory, how to say it, but they come out less clearly than the holes)))

The sausage (I had a fairly hard ham) crumbled a little and was not perfect, but I think that if the sausage is ordinary rubber, of which most are on the shelves, the mustache will be OK with a cube, it will certainly turn the chicken into rags ...
but yesterday I tried to use it with raw vegetables, I'll say right away it was a little scary, firstly there is a warning in the instructions (fruits and boiled vegetables !!), well, I thought, what if I got a hard sample of fruit)))
It was necessary to cook chicken coppers and I undertook to chop raw potatoes and onions into cubes))
The second thing that horrified me when the potatoes went, in the place of the cut-pushing through the grate there was some bouncing of the gearbox cover relative to the bowl itself ..... well, judging by the reviews, the gearbox flies in the first place .... and I thought, since what a thread I cant with him, so let him immediately come to light, than later ... until I dispersed so to speak)))
Raw material :

assembly unit
I cut the onion like this:

further potatoes
I must say right away with such products, of course, it is better not to be rude, the difficulties were felt when cutting it, although not great, but they were!
Finished cutting, removed the gearbox and look into the cutting:

as you can see, there is practically no waste, but even that which is stuck in the grate can be easily removed by a special "push-through"


Separately took a picture of larger cubes with a teaspoon (for scaling))

And finally, I disassembled and washed the whole unit:

someone will say that there are too many movements because of three onions and three potatoes, but for me it is easier to do a little different things than one and three hours, all the more as I imagine cutting potatoes into the same small cubes, and onions, too, by the way ... takes, so I'd rather spend the same amount of time assembling, disassembling, washing, than scoffing with vegetables, bending over the board with a knife ...
I haven't tested the puree nozzle yet (it doesn't pull something on the puree yet), the disc for potato pancakes too
I beat the eggs with a whisk, but I can't say anything like that, well, it beats it like a manual one, only you don't waste any energy, except for pressing a button and holding it over a bowl. Obviously, for housewives who beat creams or a dozen or two eggs, probably a good help, but I just had to test the presence of torque and I got it ...
As soon as I make the mashed potatoes, I will unsubscribe .... but in general, I am satisfied that such an assistant appeared and the company that was not already promoted seems to have become less squinting, this is the second Vityok, I hope it will not fail (the first is a kettle with lights depending on the water temperature and maintaining the set temperature has served regularly for 3-4 years, there was no breakdown and repair, and at night how beautifully it shimmers in different colors, it has long been registered in the kitchen as a night light)))).

turbo speed button. It is written that it is used for a universal grinder. What does it mean?

this means that grinding at high speed will give you fast and even grinding (because on a small one you will get a very fine part - into a porridge of the chopped product and a part of large pieces), for example, grinding takes literally 2-3 seconds for me, during this time the motor is clearly will not overheat and you will successfully "grind the required number of products.

The chopper can not be used only with this button on the other?

possible for sure, but you will probably get a different result, and if not, use health and a different speed, there will be no damage to your blender))

Next, I read the preparation of mayonnaise - a hand blender .... and turn on the turbo speed. I read more horror stories about turbo mode. Is it possible to make mayonnaise not in turbo mode. If yes - what speed to choose them there 12.

I have my own "philosophy" here, starting with the turbo mode (when you need to beat eggs, sugar, salt, mustard quickly and into a single mass), and then when I start gradually introducing oil, I switch to normal (I set the average speed from the bulldozer, so she and use it to this day)) and there I twist it longer ...

I bought a Vitka (VITEK VT 1480), it was already discussed earlier ... but now I decided to bring my own spoon of tar or honey (you judge).

And I will add a tremendous log of TARN. I don't even know how to put it in words. The Vitek brand is dead for me. After 3-4 times of using the VITEK VT 1480 blender, the reducer in the lid died. The spare part was not found in any service center. Six months later, when mixing another portion of cottage cheese, the blender itself burned out. Interestingly, I bought it for a share for 2600 rubles (new) without a guarantee and did a great stupidity.

Is it possible to make mayonnaise not in turbo mode.

And at normal speed, mayonnaise is obtained. My blender has only one speed.

Thank you very much everyone for your answers! Mayonnaise has already been made. At normal speed! Hurrah! I really like this device. And how did I live without him

I also have Vitek, she took it as the first blender to make friends. I do everything for them, he is always at hand. Even if it doesn’t last long, I’m not very upset, I’ll take something more expensive, Vitka took dollars for 90. While the flight is normal. And I have Vitek a coffee maker, a coffee grinder, and I also look at the Vitek millstone coffee grinder - I want.

And I will add a tremendous log of TARN.

I have glory eggs there is a guarantee, again it is clear that once at a time it is not necessary, you will not be lucky, that's the question ...
just like you, I always focus on "promoted" brands .. and the same parsley (or rather a tape measure), wrote above that Vitkovsky's teapot has been plowing for several years already ... and at least one light bulb burned out or the plastic went away, no fury) )) and for example an LG vacuum cleaner for 12 thousand hazel grouses died after 2 cleaning ... well, what can you say, everyone has a percentage of culling
It is also clear as day that if they allowed the fin the opportunity to buy a separate meat grinder, multi-cutter, mixer, blender, and God knows what else entot vitek contains ..... and the main place in the kitchen - I didn't think about it, but the pursuit of cheapness and lotfunctionality lead us to such actions. again, reviews say that some have been plowing like a damn for more than a year and at least that ...

I also have Vitek, she took it as the first blender to make friends. I do everything for them, he is always at hand. Even if it doesn’t last long, I’m not very upset, I’ll take something more expensive, Vitka took dollars for 90. While the flight is normal. And I have Vitek a coffee maker, a coffee grinder, and I also look at the Vitek millstone coffee grinder - I want.

I understand this, a positive attitude .... has died - and we will replace it with a cooler one. I'm also thinking, well, let it last a year, and progress will bring us 10 more bells and whistles more device)))

I also have Vitek, she took it as the first blender to make friends. I do everything for them, he is always at hand. Even if it does not last long, I will not be very upset, I will take something more expensive, Vitka took dollars for 90.

So it's expensive.
There are blenders of well-known companies cheaper ...

I have a simple brown leg from blenders - compared to Bamix, this is heaven and earth.
But you can't do with one foot in the kitchen. I need both a tall glass and a bowl with a knife.

[Zvezda askony]

Zvezda askony,

Second - Hand Blender Mixer A-MIX

- what's this? I can't find this at all

High-speed semi professional hand blender A-MIX 5 in 1
The A-mix hand blender from the Korean company Ace Electronics has a wide set of four knives, a can with a Grinder knife and a 800 grams polycarbonate glass.All these delights are compactly placed on a special stand, now you don't need to keep everything in a blender box or shove it into different drawers. The stand takes up little space and fits easily even on the smallest desk.

Features of the A-MIX hand blender
High Rotation Speed ​​- The motor rotates at 18,000 rpm.
Low power consumption - only 170 watts per hour.
Continuous working time up to three minutes - during this time you can make a cocktail, chop something solid or chop a quarter of a cabbage head.
Multifunctionality - unlike traditional submersible blenders, A-MIX is equipped not only with chopping knives, but also attachments for whipping and making cocktails.
All in one - all parts of the blender fit snugly on a special stand.
Endurance - the blender can be used with both cold foods and hot meals up to 105 ° C.
Calm and fast - 2 blender speeds.
Durable - The bottom of the appliance and the attachments are made of stainless steel.
A-MIX hand blender package contents
Blender;
stand;
a glass for preparing mixtures;
bank grinder;
two bladed chopping knife;
shredder knife;
cocktail attachments;
whipping knife;
Specifications
Submersible type
Management Electronic
Voltage 220 Volt 50 Hertz
Power consumption 170 W
The number of revolutions per minute 18000
Time without interruption 3 minutes
Weight 1 g
Dimensions (L x W x H) 70 mm x 65 mm x 335 mm
Equipment
Number of jugs 1
Number of attachments 4
Pitcher Yes
Whisk attachment Yes
Cocktail Attachment Yes
Shredder Nozzle Yes
Chopper attachment Yes
Knife Yes
Capacity 800 gr
Camping glass No
Russified instruction No
Chopping bowl Yes
Functions
Number of speeds 2
Features:
Harmless materials Yes
1 year warranty period
Jug material Polycarbonate
Stick material Stainless steel
Stand Yes

Removing Knife Yes
Value for money 5
Country of origin Korea
Black colour
7800-00 all the fun
Similar blenders are sold 12-13 t p

[Zvezda askony]

Zvezda askony, Thank you!

[Zvezda askony]

High-speed semi professional hand blender A-MIX 5 in 1

Zvezda askonyThanks for the detailed information on this blender! I liked everything and already want it ...