Kenwood kitchen machine: working with attachments

Now I climbed to the site to look at the attachments and found 2 new ones - an enlarged dough roll and a very interesting design for ravioli ... They are, however, like an airplane - 13 thousand each. But interesting ... I just bought my regular attachments yesterday, I gave a lot of money and now I also want these 2

now I also want these 2

that's what the situation is 🤦, just maybe not quite sure about the ravioli, but about rolling out to 22 cm KAX99A0M absolutely WANT !!

absolutely WANT !!

She's awesome. The ravioli attachment is now forgotten (I really have it on the marcato, but the new Keshina is one to one). It rolls out the dough onto my usual favorite round dumplings in seconds. I liked it a lot more than the raviol bait. But that's my personal opinion. Maybe someone will be insanely happy with the new raviolnitsa

[Irina]

Irinawhen should you arrive ??

[Olya]

OlyaWhen the borders are opened, then exactly

[Irlarsen]

Irlarsen, Irina, does the raviolnitsa put a lot of filling? And then how to separate them?

[Oksana]

OksanaIf you press something and scroll slowly, then the filling is quite normal. I did not like the wide rolling yet. But here I have big doubts, because the nozzle will hang high, long stripes will stretch under their own weight. In the commercial, a very short strip! And I rolled it out with a wide nozzle, put it down, the meat once again and 37 pieces are ready. All the same, the main effort is rolling. I should sell Marcato

Oh girls! Of course, I am very glad that I am reading you, there are so many useful things! But at the same time, it is very dangerous for the wallet to be here!
I bought the car quite recently, I haven't even really used it yet, but I already managed to buy a bunch of attachments for it ... And after reading, I want even more!
Well, a saber knife and a grate with very large holes, that's for sure!
You need a spare bowl ... Well, probably
And now I want to ask the experienced ones - do I need to buy all sorts of hooks and whisks from the old ones to my 9040? I would like to understand which in the end is better in comparison? And then there are a lot of them and it is not clear ... But they also cost a lot, and I have already spent a lot of money ...
Thanks to you, I wanted another nut grater for the meat grinder, but I didn’t find it on sale on Amazon, and I don’t know how to order there, I’m more dear to ebay, but there is no such thing, maybe someone is lying around unnecessary, unclaimed? Or is it possible to completely do with a chopper? Although he won't rub chocolate and cheese, I suffer now in general ...
And tell me, please, do I need a low-speed grater for my existing high-speed and combine? I honestly read 40 pages so far about the attachments, but I still don't understand ... But after reading I bought a combine, although I have a brown ... Maybe in vain, I'll take a look ...
And with this increased rolling, now torture! I have not yet opened a set of 3, but I already want a big one!) It seems to me that there will be no need to do anything overlapping with it on Napoleon ... And there would be one rolling Nozzle, I would probably sell it and buy more, but there is a set But I don’t want to get rid of spaghetti and the second one, and it’s probably inconvenient to cut spaghetti after a big roll ...
My perfectionism will drive me crazy! Everything should be there and all the best! at the same time, the kitchen is small and the money is not that full of superfluous!

[GoldyM]

GoldyM, Marina! You have a wonderful Profservice store in Moscow. You can buy spare bowls there. Metal ones are much cheaper in many stores, and there are plastic ones in this store, white and gray. Lightweight white and gray plastic bowls. They can only be used, not including induction.And they fit well into your new car, but they do not close, I don’t remember any more, the casing of your car, what is it that interferes with the closure? Our girls use them anyway, but someone cut holes there and uses them in the 9040 car. This is written in the topic, read. There are also different beaters in the same store. Corollas are thick and thin, that is, the number and thickness of twigs in the corollas are different. What is yours? There are 18, 16 and 24 fasteners, that is, 8,9,12-bar.
In the same store and other app. there are a lot of parts. If not in stock now, you can order.



Rolling out is, of course, a good thing. I don’t know the raviolnitsa. Well, it's up to you.

[Masha Ivanova]

Masha Ivanova, Elena, thank you! Yes, I already understood about the bowl, while it dangles in my basket, along with the gaskets for the chopper)
But I don’t know about whisks and hooks ... I have a whisk from the latest set, with thin rods, now I can’t say how many of them ... I saw a more massive whisk in the reviews before buying, I thought I would have this and even seeing this one I was somehow disappointed, although, perhaps, it beats perfectly and is even better with thick rods ... There is nothing to compare with, I want to understand ... Maybe someone was comparing ...
The same story with a hook ... The one that kneads the dough with a spatula like this at the end or not?
In general, the topic is many years old and probably for those who have been in it for a long time, more than one car has already changed, well, accordingly, all sorts of attachments ...
What I didn’t buy was a mill ... I thought that I didn’t need it at all, since nuts and powder were not allowed in it, but I don’t plan to grind cereals, I’m buying flour ...
In addition to all the standard attachments such as a hook, a whisk, etc., I now also have a soufflake, which I got with adventures, since when I ordered a car, I ordered the one for the chefs))) well, I thought it was logical, I have after all, too, a cookie chef))) I barely convinced the service to take it back (it was completely untouched, I didn’t even get it out of the box), lost it in the shipment, but sent, received money and bought a suitable one ...
And there is also a meat grinder, a set for pasta, a screw juicer, a cube, a high-speed grater, a chopper, a combine, a nozzle for figured pasta with a pair of dies and I got a sieve on Avito (unreasonably expensive)

[GoldyM]

GoldyM, Marina! As for the corollas, I can say so. All perfectionists bought themselves on the second, as opinions differed. Someone likes thin, someone fat. Previously, there were only two of them. 8 bar and 12 bar, that is, with 16 and 24 fasteners. Now a new one has just appeared, 9 bar with 18 fasteners - the one you have. Over time, you can buy 12 bars from Profservice.
Everyone definitely advises the hook that was in all previous inductions. It's just that some 20 or 9040-9060 owners say their hook is decent too. But better than the one in the old inductions, until the hook was invented. I advise you to order it at Profservice. I'm not mistaken, am I? You have a hook without a spatula at the end, right?

[Masha Ivanova]

Masha Ivanova, yes, Elena, I have no spatula, just a hook ...
That is, I correctly understood that the hook kneads better with a spatula? So I need him too ...
Well, a thick whisk, right?
I just don't like to pay for the delivery once again, so I try to order everything at once where it is paid) I save like this, like, although judging by my spending on a typewriter and personal belongings to it, you can't tell

[GoldyM]

GoldyM, Marina! If possible, then order there immediately a 12-bar whisk, a large hook and at least one plastic bowl. This is at least.
And further! Do you have a sieve wiper AT930?

[Masha Ivanova]

Masha Ivanova, thank you very much, Elena!
Oh, yes, I bought a sieve on Avito ... Very expensive! I read here and even cry!) Well, what has already been done!
Can you poke your nose into the whisk? I found a hook with a shovel there, but it is only on order ...

[GoldyM]

GoldyM, Marina! This is a hook KW711659 It is also available on request now. While the price is STANDING = 3130
Did you find the correct code for the whisk?
We have a wonderful guide to Kenwood on our website, though without a photo. But all the same, there is a lot of information you can find out. Here is the link https://Mcooker-enn.tomathouse.com/in...om_smf&topic=501911.0

[GoldyM]

GoldyMMarina, you write that you haven't really used the car yet, so you shouldn't buy all possible whisks and hooks right away, they are on sale and you can buy them later if! .. the need arises !!! The ones that you have with the car are very good, and the car, after all, is bought to help you PREPARE, and not as an object for spending money. When you have mastered a bunch of recipes, then you will understand whether you need to buy additional duplicate hooks and whisks for it. IMHO

Zhenya is right, of course. But if almost everything has already been bought, then the goods that you will take in Profservice under the order upon its arrival, you may not pay, if you come to the conclusion that we do not need something from the order. And you have to wait at least a month.

[Masha Ivanova]

Masha IvanovaElena, I just found the hook, I didn't find the whisk ...
Thanks for the guide! A lot of valuable information! It's a pity only the photos do not open, it would be great just to see (
j @ ne, Eugene, well, in principle, yes))) just self-isolation acts like this, probably))) stress is replaced by irrepressible shopaholism))) but even if I don't buy everything at once (which is most likely), it will still come in handy for the future ...

[GoldyM]

GoldyM, Marina! I, too, climbed to look for a corolla, but the search showed that the results were 0 What does this mean, I do not know, I need to call them on Monday and find out. Previously, all the corollas were. In stock or on order. And I'll tell you the code now.
Here are all the whisks for the 6.7 L bowl
- fluffy with a skirt (12 rods) - KW712208 (from inductions it definitely fits the old one, but I don't know about the new one)
- fluffy (12 rods) - new KW716840, old KW712207 (to any induction)
- reinforced (8 rods) - new KW716842, old KW711661 (to any induction)
I write only for induction, I just do not touch other machines.



These are their new and old codes. Maybe now the codes have changed again, the reference book was written for a long time.
But I don't have the code for your whisk with 9 rods. You can ask the manager in the store, he will find out everything. They also have such a service. I ordered them parts, which we together with the manager
found, and before that they were not in the assortment of the store.
Yes, and we are all so accustomed to the fact that today you cannot buy, and tomorrow there is no more, then they will be removed from production, then it will become more expensive. Therefore, if there is a material opportunity, it is better to buy.
And don't be sorry about wiping. Price 11-12 thousand, we all read this announcement. If spare parts for AT992 were assembled through Profservice, well, it would have cost a little cheaper, and to hell with it. But you have a dear, 930th. This already warms the soul. Somewhere overpaid, somewhere underpay, you will be lucky to buy something cheap.

[Masha Ivanova]

Masha Ivanovathank you Elena!
Yes, I really needed a sieve, so I don’t regret it!) Just when I read here and see other amounts, I understand that I just didn’t have time ... follows! You just need to break the spending by months and that's it)

Here are all the whisks for the 6.7 L bowl
- fluffy with a skirt (12 rods) - KW712208

Skirted whisks are not suitable for new induction. Or fit? ... But I haven't heard anyone buying.
But this whisk, it seems, is exactly the one that is now included in the kit - 9 rods with 18 attachment points (article: KW717152). Yes, I looked in the description, for it there is KCC9040, KCC9060 in the list of models. This is if someone third in the collection wants.))
🔗

[LudMila]

LudMila, Luda! I just copied whisks for 6.7 L bowls from the handbook. Now I will correct it so that what is needed for each induction fits. But about the whisk with the new code, I want to call the store and find out. This morning I tried to find there both 8 and 12 with all sorts of codes, but in both cases they seem to be redirected to this new whisk, where they write in the description that it is supplied instead of the old 8 bar and instead of the 12 bar. Unclear. It seems to have a lot of twigs and it looks thin, like a fluffy one. Maybe there are 18 rods, but it seems to be thin.



LudMila, Luda! You have been in this topic for a long time. Can you tell me the answer to this question. Just curious.
What machines did the Flexi of the old series go with (44001 and 44002)? I know for sure that such a flexi came with the KM 010 car and, perhaps, did the KM 013 A go to KM 020/023 or not? Nowhere do I come across any video on the Internet, as well as about the A955 meat grinder.It is to KM, because when KMM and KSM began, then today's ones went (except, of course, induction 070)

[Masha Ivanova]

Masha Ivanova, Elena, about the whisk. The modern 9-bar, which has 18 attachment points, did not exist at all before. This remake is now with induction (I don't know about other machines). My harvester came with a "reinforced" set (it is 8-bar, that is, it has 16 "entry points"), and we also bought a "fluffy" one (12 bars with 24 "points"). Both of these corollas were in Profservice, and now, it seems, neither one nor the other is available, only the newest one.
The new one really looks like fluffy, that is, its twigs are thin, but there are noticeably fewer of them. In the subject posted photos of this new. I only have reinforced and fluffy, new unnecessarily.))
I can't say anything about flexi, I did not try to memorize information that does not apply to my car.)) My old flexi (which looks like a K-shaped, but in silicone, or in rubber, in general, with a soft coating) I I ordered it on Amazon, it has not been officially sold anywhere for a long time, only from hands.

[LudMila]

LudMila, Luda! I also have 096, so the rim is reinforced. I was going to order fluffy after the end of the current situation, but it seems I did not have time!
So Marina GoldiM does everything right, that she takes everything right away.
I asked about old Flexy out of curiosity. I have it, in the sense of 44002, kind people helped.

[GoldyM]

GoldyM, Marina, at Profservice you can still order a mixer that used to go to inductions:
🔗
Well, the second bowl is a must!))
For example, this one:
🔗

I asked about old Flexy out of curiosity. I have it

Elena hello, how is she at work ?? At 9060 you need 44001 ???

chocolate and cheese

And please tell me if I need a low speed grater

Here she is just fine chocolate, cheese and nuts

[S_V]

S_V, Sveta! I have Kenwood recently. I did not notice much difference between the old and the new flexi, but in terms of the amount of all kinds of oil products I had a lot in the bowl. I remember the words of Miranda, who thinks that the 44002 is much better than the new flexi with just a small amount of butter. I started buying all the attachments, even though it was too late, but much earlier than I bought Kesha. And I wanted exactly the old induction (but new in the sense of not being used), since for me it is more reliable.
And if 44002 is already there, then both flexi will be in operation



On 9060 you need 44002, it is for 6.7 l bowls

[Masha Ivanova]

Masha Ivanova, Lena, and these corollas with a skirt exactly fit the old inductions? Then, probably, to the new one too. I missed this moment, everyone discussed and ordered without a skirt.))

[LudMila]

LudMila, Luda! I honestly don't know. I also read all this in the subject, about your flour and orders for hooks and whisks. Nobody really said anything about this one with a skirt, or I just don't remember. He looks, of course, very lame.

[Masha Ivanova]

Masha Ivanova, Lena, what a wise train of thought 👍👍👍👍👍 Buy nozzles in advance 👍👍👍👍

[Masha Ivanova]

Masha Ivanova, from Km 010 already a new flexi was on



Here I do not need a low-speed one for nothing. Just like a mill. And I love high-speed

[Ketsal]

Ketsal, Olya! I won't even argue, if I say something wrong. In my opinion, someone from the members of the forum posted either a photo or a video with this attachment. I even remember the nickname of the forum member, but the name is not. I'll find it, I'll write it here. And plus I myself saw the video on YouTube with a complete set of KM 010 I will also try to find it. If the old ones came here, as before, the owners of such machines would surely be found!

I don't need a low-speed one for nothing

Of course, if you are satisfied with how high-speed rubs chocolate and nuts, then only in joy! But a person has a high-speed one and asks how to rub nuts, cheese and chocolate, so the high-speed result does not suit, then the low-speed one is an excellent choice for these purposes. She was just invented for this!

[S_V]

S_V, Sveta! Wise train of thought! I bought for both the old and the new. Now I can't sell the KAH mill, a new one. Remember, last year I bought, you then prompted me the action.

[Elena]

ElenaThen there is no need to sell, it is better to buy and use an adapter

[Irlarsen]

Irlarsen, Ira! So I bought AT, which I now use and KAH. I didn’t hope to find the new 096, which I had wanted for so long.

[Elena]

Elena, This is strong !!!!!

I didn’t hope to find the new 096, which I had wanted for so long.

It is strange that he disappeared in Russia. Until recently, Amazon and other similar stores were full of it, although the prices are the same as. and at 9060

PISI Out of interest, I looked at the nonesh prices. Stunned! 1694 euros !!!!!! Six months ago, heaps of it were everywhere. Just for enthusiasts, the last copies are being sold at exorbitant prices.

[Irlarsen]

Irlarsen, Ira! "The mind cannot understand Russia ..."

[GoldyM]

Wow .. in you give ... no one slept, or what ??
GoldyM, Marina, then, in order ... you (I hope you can) have 9040 and to her;
1. Set for pasta of 3 attachments (great thing)
2. Sito- definitely need
3. Auger - excellent
4. Cube - like it, it means you need
5. High-speed - good for a large number.
6. Food processor (harvester) - definitely needed, even because of the knife and grater N2!
Further, it is not necessary to change the hook, there is no such wah wah effect from it, here, in your hook, due to the spiral shape, the dough is kneaded very well. Your whisk is considered the best, so far, I have not used it, but I have both reinforced and with rods .. it will beat the same way, only it is more convenient to get it out of the rods, there is also a video of how I beat the marshmallow. I would take the low-speed one, I have not heard about the attachment for the meat grinder for nuts, the cups are insanely convenient and ... let you write down what you want to cook, and then I will correct it.
As for the flaxi to the old car, I have it, I love it, but the butter in the new one is chicly beaten up by the cache, if necessary + then I'll post the video.

I have both reinforced and with rods .. it will beat the same, only it is more convenient to get out of the rods,

I have a small km, 4.6 l Titanium. Corollas "native" with a small number of thick twigs and additional purchased fluffy, with a skirt. To get out - what of what does not bother the other: knock on the edge of the bowl and shake it off. Well, if something is thicker - with a spatula. It's okay, in general. But the fluff beats up 2 times faster (biscuit, egg whites, cream). Why he "sucks" - I do not understand. I love it tenderly, I only whip butter from cream & sour cream with thick-roasted butter.
One hook, spiral, without a blade. Kneads - it seems that it is winding, but according to the result it kneads perfectly, even if you never stop and peel the dough.
About shredders: I am quite satisfied with the processor's graters. And for cheese, too. There is a low-speed one, I did not appreciate it enough to get it once again. That is, the processor and the multi-shredder are my everything, they are at hand, like a meat grinder with a blender. And for fun, a cube with a spralizer (they are further away, like an auger juicer).
But I don’t make any blanks, except for jelly (there is a sieve!), And my cooking volumes are modest. Otherwise, I would have purchased a high-speed shredder, although it is inconvenient for me in terms of installation, completely inconvenient.
About the mill. This is the last of the purchased attachments. I like it, because I bake bread with the addition of "different flours", then with one, then with the other, it rarely comes out with each. The flour goes bad. Rye, spelled, barley, millet. Tired of throwing it away. Now I grind, if necessary, as much as necessary at one time. Cereals, except for rye, are always in the house, and are used faster than flour made from them.

[NatalyaB]

NatalyaB, Natalia! Don't be offended by the crap. This does not apply to people, but to the type of corolla. It looks very much to me, it seems to me a very long time in the style made. The styles of dresses become outdated, sometimes seem ridiculous. This probably does not affect the functionality. I may have to buy the same one myself, since I missed the fluffy one.
zvezda, Olga! So which whisk is easier and which one is more difficult to remove the whisk from? It is not clear from your text.

Why does he "suck"

I didn’t write this .. but in my video you can see that the obadwa are whipped the same way, but these are 023 and 9060!

Which whisk is easier and which one is more difficult to remove the whisk from?

From fluffy - easy! I have to knock on the bowl and that's it, but I have adapted to the fat-barber too, so everything is convenient for me!

Don't be offended by the crap. This does not apply to people, but to the type of corolla.

I take no offence.
I am a little perplexed. After all, the skirt protects from drops. And the style is as anyone.

I didn’t write this .. but in my video you can see that the obadwa are whipped the same way, but these are 023 and 9060!

Here, and I spotted with a specialist - almost 2 times faster, but this is 7300s. It is also slightly more elongated in shape, and not only more twigs.

From fluffy - easy! I have to knock on the bowl and that's it, but I have adapted to the fat-barber too, so everything is convenient for me!

And I knock with a thick-barreled one. Without fanaticism . An iron bowl, which can be done for her, but it is easily knocked out.

[NatalyaB]

NatalyaB, Natasha! I've read opinions here that when you knock out of the whisk on the bowl, the finished contents of the bowl may settle.
What can you say about this?

can you tell us about it?

Nothing ... yes, everything is fine !! I've been hitting for 10 years and nothing! And marshmallows and proteins and creams ...

[Masha Ivanova]

Masha IvanovaYelena, well, the harvester beats up SO that if it settles for a couple of millimeters, it’s even better, otherwise it doesn’t fit into the mold.
In general, if you do not hit with all your strength, then subsidence does not occur, and I do not hit. I knock slightly. Does not settle.

Thank you girls! So we knock calmly, not being afraid of anything! )))

[Girls!]

Girls! I saw that you are writing about a sieve for 096 model. If I'm not mistaken, it is out of production. Or I'm wrong? I really want a sieve !!!!!!!!!!!!

[Natusichka]

Natusichka, Natasha! It has been discontinued. But several of these sieves are sold in Moscow by a person on Avito at a huge price = 11-12 thousand. And, basically, the members of the forum got out of the situation like this. We bought a sieve for a 4.6 liter bowl (AT992) And in the Moscow store Prof service we bought the missing parts for it. The AT992 sieve (for a 4.6 l bowl) and AT930 sieve (for a 6.7 l bowl) have the same parts, these are two different sizes of strainers and two different parts, this is the rim of the sieve itself, it is made of metal and is higher than the rim from 992 sieves and wiping itself with a pin. This pin is longer and thicker than the 992 sieve pin. This is how many assembled these sieves.
And it turned out to be decently cheaper than buying on Avito. This is how the issue is resolved in Russia. As in Ukraine, I do not know. But I think it can be much easier for you.
By the way, many people simply use a 992 sieve with its thin pin for 6.7 liter bowls and are quite happy with it.