NatalyaB
zvezda, one pin for both rims? Which one? Big or thinner?
LudMila
Quote: zvezda
What is HERE ?? !!
Here. You have 2 rims and 2 pins. Otherwise it will not work!




NatalyaB, you need 2 and 2.
Olya confused everyone.)))




Well, well ... Who is the fourth to roll out?
This is called - I want, I can`t ...)))
Masha Ivanova
zvezda, Olga! When you put a metal rim, what pin do you use? Thin or thick? That's what Luda wanted to say. Your answer will be interesting




Girls! Still, I decided to apply here! Tell me, is there any owner of the Kenwood KM 020 here?
It is the KM series, not the KMM. It is 020, not 023. Maybe some of you used to have KM 020 This is a series that appeared for a long time, which has not been produced for a long time. I just have one question for them.
proshka
I have kmm 020. It seems there is no difference between km 020 and kmm 020, 023 is the same, only in 023 there is an additional nozzle, it seems. Or not?
Masha Ivanova
Girls, lovely! Now, if I find out, I'll tell you everything. In the meantime, I'm looking for the owner of KM 020
LudMila
On wide rolls - there are already four of us. All. Ordered ...))
zvezda
Quote: LudMila
You have 2 rims and 2 pins. Otherwise it will not work!
I am writing for the fifth time !! It will work out !! I lived with a plastic rim for 10 years and there was only one pin !!
Quote: Masha Ivanova
when you put the metal rim, what pin do you use?
I never paid attention to what I get!
And here I am ..
LudMila
Quote: zvezda
I am writing for the fifth time !! It will work out !! I lived with a plastic rim for 10 years and there was only one pin !!
Olya ... Well, right, there is one rim and one pin.)) I mean that the pin is short + a plastic rim - everything is fine. So you had 10 years.))
But if you buy a metal rim - what pin do you need? Is it your first one that is short?
GoldyM
LudMila, I would like to know just the opposite - if there is a pin to the aluminum rim, will it fit on the plastic?
LudMila
Now I will show the sieves and pins (I don't want to get the car):
Kenwood kitchen machine: working with attachments
Kenwood kitchen machine: working with attachments




The long pin will push the mesh into the plastic rim (theoretically, because no one will do that). Short - will not reach the mesh in metal.
NatalyaB
LudMila, here, quite convincingly.
GoldyM
LudMila, Ludmila, well, the pin can be twisted ... Or will it fail?




Girls, please tell me here at this link 🔗
The same hook from the old induction?

Or this one?
🔗
I'm confused, and Miranda's handbook is hard to understand without pictures ...




If suddenly someone needs it, then I found an old flexi, like a K-shaped one, but 4 liters
🔗
LudMila
Quote: GoldyM
Or this one?
🔗
This. But he is a little different, there is no "hat" on top (or how to call it correctly). Although the SKU on the box is correct.
Quote: GoldyM
it's hard to understand Miranda's handbook without pictures ...
There are some hooks and whisks for a large bowl (not all, link are my photos):
Kenwood kitchen machine: working with attachments # 5023




Quote: GoldyM
Or will it fail there?
I won't even try. And I don't want to write anything more about the sieve, that's enough.))
GoldyM
LudMila, and to hell with him, with this sieve! I don't want to think about him anymore either! People over there say aluminum is fine ...
Lyudmila, thanks for the educational program on the nozzles! Yes, according to the second link there is no such hat-skirt and the seller does not seem to send it to Russia
I will still look ... With such a number, at the professional service, however, for some reason, there is a new hook, so that seller has no trust at all! I'll try to order through professional service, maybe they will get it)
I definitely want the hook, for some reason it seems more reliable to me for a tight test ...
And I don’t know the whisk ... How reinforced according to the results of use?




By the way, here in the subject, they gave the number of the reinforced corolla, KW711661, but at the professional service there is nothing on this number ... And the one that seems to be similar in appearance, with a different number ... Do they all clearly there by numbers?
LudMila
Quote: GoldyM
With such a number, at the professional service, however, for some reason, a new hook
Maybe the articles have changed, or maybe, which is more likely, they were confused in Profservice. Here is a hook with a shovel they have:
🔗




Quote: GoldyM
How enhanced by the results of use?
Fine. I practically only use it.
There is now one new 9-bar whisk on the site:
🔗
There is no reinforced and fluffy, but you can ask if they will suddenly bring it to order.
GoldyM
LudMila, Ludmila, Thank you! I found all three from one seller in Italy - a hook, a whisk and an old stirrer, I'm asking for delivery)
I will complete and be calm! It remains only to buy small things like a plastic bowl, a spare knife for a multi-shredder, gaskets for it, a sickle-shaped knife and a grate for cutting into pieces
Nothing at all
I hope that this will be all!)))
LudMila
zvezda, Olya, happy Birthday!!!))
Kenwood kitchen machine: working with attachments
GoldyM
zvezda, Olya, happy Birthday!
j @ ne
zvezda, Olga, congratulations!
Kenwood kitchen machine: working with attachments
Irlarsen
Today we announce DANCES !!!!!!! In honor of OLI-STAR's birthday !!!!!!

zvezda
My girls !! Thank you very much!! Very nice..
Walking !!
Oksana_A
zvezda Olya, Happy Birthday!!! Be healthy and happy, may your dreams come true !!
Natusichka
Olga!Happy Birthday to you! Let everything work out in life !!!! Health, happiness, success and good luck !!!!
Anastasi_ya
Hello girls!
Happy birthday, Olya!
Those who know, tell me, please.
can't choose between mini grinders, smoothie attachment and blender.
I make puree soups submerged (I don’t want the hassle of pouring) I need a universal chopper + cocktails occasionally. dough pancakes / pancakes every hundred years I suppose to make in a processor-combine-grater.
Or, if you have a grater combine attachment, can you not bother with a blender and take a dough sheeter?
I have three nozzles as a gift. I just can't choose. while I'm planning a meat grinder, a combine and some kind of chopper-blender. Advise, please
Ketsal
Anastasi_yathen roll out
Anastasi_ya
Olga, and chop / mix everything in the combine? will he cope?
Inetchik
Quote: Anastasi_ya
not bother with a blender and take a dough roll?
Moreover, the dough sheeter is more expensive than other attachments





Quote: Anastasi_ya
chop / mix everything in the combine? will he cope?
He will cope with everything that is not liquid and not in a very small volume (for example, one branch of greenery will not grind, but a bunch is completely)
Anastasi_ya
Inetchik, thanks, I'll think)
LudMila
Anastasi_ya, nozzles are correctly advised to take the most expensive ones. Anyway, then almost everything will be desirable.))
Masha Ivanova
Anastasi_ya, Anastasia! What kind of harvester are you taking, if not a secret, and is there a new 22 cm sheeter included in the proposed list?
The fact that any rolling must be taken is unambiguous. And if there is a big one on the list, then there is nothing to even think about!
Ketsal
Anastasi_ya, the knife combiner works like a similar attachment to a hand blender, only large. In it you can make pates, minced meat - like emulsion - not chopped, I rubbed raspberries with sugar on an insert in it. I love raspberry pits in jam. I got pasty cottage cheese (dry cottage cheese plus sour cream). Cups for small volumes. For me, a coffee grinder is better for coffee. For me, glasses are only for sauces and salad dressings, that is, only 1 are used. If there are kids, then glasses are needed - make 50 g of puree
Amazonka
zvezda, Olya, I join the Congratulations, Happy Birthday!
Anastasi_ya
Elena, hello, stopped at 8003, the dough sheeter is only small. decided that I did not need it. took a harvester, a meat grinder and a smoothie
Masha Ivanova
Anastasi_ya, Nastya! Great choice, congratulations! I don’t know the needs of your family. I think you have chosen what you most need to start with. And you will still come to rolling after some time. There are several attachments that, as a result, everyone has.
Anastasi_ya
Masha Ivanova, Thank you!
I just adequately thought that we work for 10 hours), most likely after work I will torture smoothies than sit down to sculpt dumplings. I doubt it in a meat grinder) I always bought minced meat, but my mother said that a meat grinder was needed, and I was thinking of trying to make sausages in the freezer so that after work I could throw it in a frying pan and dinner was ready.
in general, the car is an acceleration of the routine, + some kind of blanks to unload yourself. I hope I made the right choice)
Thank you very much again for your advice!
Helen
Quote: Anastasi_ya
I always bought minced meat
Horror
Quote: Anastasi_ya
but mom said that a meat grinder is needed
That's right, mom, she said !!!
LudMila
And I never brought the meat grinder Okay ...
Well, okay, it's all for the best. She supported a domestic manufacturer, bought Axion for almost the same money. Full delight!))
Helen
Quote: LudMila
bought Axion. Full delight!))

Irlarsen
Quote: Anastasi_ya
and smoothies
I never even thought that this particular attachment would become the most popular one for me. What am I not doing in it other than the smoothie itself. Puree soups (I spit that it’s not written hot, everything works out great), dough for waffles and pancakes. I grind and make sauces if the volume does not fit into the cups.
LudMila
Received rolling.
What a piece of iron!
Kenwood kitchen machine: working with attachments
proshka
I need one, I have no strength!
LisaNeAlisa
Quote: LudMila
What a piece of iron!
Oh, hefty. And to me only through the adapter. Will it hold ...
Masha Ivanova
LisaNeAlisa, Anita! And how much does the little one weigh? I don't have it at hand.
Oksana_A
Quote: Masha Ivanova
And how much does the little one weigh?
Elena, small weighs 1330g
proshka
Yes, I wonder if it will hold such a big one? I signed up for it and I'm thinking ...
Someone uses an adapter? Write how it is.
Rita
Quote: LisaNeAlisa
And to me only through the adapter. Will it hold ..
I would not risk it. Too much breakaway torque is obtained.
proshka
Can try to ask a question at the office. website? Is it worth it or can you ditch the machine. There, I hope, knowledgeable people.
j @ ne
I, too, only through an adapter, and the girls, thank them very much, have already bought it, now I will wait until it comes to me across the country. The auger juicer is also not a fluff, but it is quite stable through the adapter, I hope that there will be no problems with rolling. While this is my choice, and my risk.
Ketsal
Quote: LisaNeAlisa
adapter
Not sure if it's a good idea
Masha Ivanova
Oksana_A, Oksanochka, thanks! So I was also afraid through the adapter. So let's wait for the first users (from ours, bourgeois). most likely Zhenya, Jane. And then, if everything is fine, we will buy all the others who are thirsty.
And go to all sorts of sites, so they know there! How can you trust them ?! It is better to ask our Khlebopechkin men about torques, etc.

All recipes

© Mcooker: best recipes.

map of site

We advise you to read:

Selection and operation of bread makers