Kenwood kitchen machine: working with attachments

[leostrog]

leostrog, and at what speed do you knead?

Always around 0.6-08 (I mean turning the screw to 1).
This morning Ven. soft dough from 0.5 kg of flour and also had to be held. I'm afraid it won't bark completely.

[leostrog]

leostrog, there were no reviews about the head moving too abnormally. Rather, there were, but as it turned out later, people tried to knead at 4-5 speeds. Therefore, I am lost.

[leostrog]

in the Moscow Profservice finally decided on the price

Did not find.
Can I have a link?
leostrog, can you make a video of the kneading?

[Olga VB]

Olga VB, Also looked.
They decided on the price, but all this is not available, on order.

🔗

This thing is needed, right?

No! This is for newer models to fit old attachments. You need kat001me!
Here is:
🔗

[NatalyaB]

NatalyaB, thanks for correcting.
In the morning I did not see it carefully from the phone.

PS huge links should be hidden under the spoiler, they tear the page.
But more often than not, huge links are not due to the fact that they are huge (for example, when the Russian language in the link becomes krakozyabram), but because you do not cut off unnecessary information.

for example

🔗 & utm_medium = cpc & utm_campaign = Adapter + nasadok & utm_content = KAT001ME & utm_term = 22374 & _openstat = bWFya2V0LnlhbmRleC5ydTvQ kNC00LDQv9GC0 LXRgCDQvdCw0YHQsNC00L7Qu iBLZW53b29 kIEtBVDAwMU1FO2dqYVhKRFV ubzEtTjg0 MEdoYmlTWWc7 & ymclid = 24741418 6684226188100003

Highlighted in black is superfluous, without it the link will also open.
This is information about you. What you went through the Yandex market, your browser, ip, your computer configuration, etc. In addition, there is a program for counting who followed this link, your social connections are collected. And so on. Who, from where, where he went, from which page, to which he went further, the depth of view, etc.

All this information is processed, an average profile is created (gender, age, city, interests, etc.) and sold so that contextual advertising can be shown to you and people with similar interests.

🔗
here krakozyabry because of the Russian language, and not because infa in the link. Link to an article on targeting.

[Miranda]

Miranda, Thanks I'll know.

Girls who ever bought the Kenwood KAX 700 spiralizer attachment? It will work for me only through an adapter, I would like to hear the opinions of users with new sockets. Our price is 6190. The video cuts beautifully and knives 5, but the need for an adapter is confusing.

[Olga VB]

Olga VB ... I'll try next. times. when I knead the dough. make a video (if my iPad supports video shooting, but I don't hold smartphones).
I have a suspicion that those models are being brought to our market that were discarded from the Russian and European markets and they simply have a low build quality.
NatalyaB... Thank you!

Highlighted in black is superfluous, without it the link will also open

I will add.
All links are superfluous: a question mark and everything after the question mark.
For example, on our forum they often insert all sorts of different links to all sorts of different sites without cutting off the excess. And many follow such long links, and then wonder why they are being pursued with unsolicited ads.
To prevent this from happening, you need to take not a complete link, but select only the part up to the question mark in it, and it is along this part that you move in the chosen direction, and you will be happy!
Well, yourself, as Miranda wrote, try to edit your links, cut off all unnecessary after the "?" Sign, and at the same time.
Good luck!

[al2]

al2, no one bought it yet, because we do not have it on sale, but in Europe almost a couple of days ago it appeared and then it was ordered a couple of weeks.

Olga VBnot always before?
Depends on the site. On Ali, for example, you need to cut off everything after html, on Amazon it is more complicated. In any case, you need to look - track this moment 10-20 times, then you will immediately determine what is superfluous.

[al2]

al2, no one has bought it yet, because.we do not have it on sale, but in Europe almost a couple of days ago it appeared and then it was ordered a couple of weeks.

I already ordered for 6,190 + delivery, I'm waiting, they promise as much as 29.04 ...

But I have a Kenwood Chef Sense KVC5000T (the one that comes with the Chef Sense KVC5040T), and, accordingly, I don't need an adapter-adapter (the "socket" is the same as the machine in the video for the attachment) ...

This attachment is compatible with:
Chef / Major (pre-2014 models start with KM) - Yes / via KAT001ME adapter
Sense / Sense XL - Yes
Chef / Chef XL (models after 2016 start with KVC, KVL, KCC) - Yes
kMix - Yes
Prospero - No
MultiOne - No

Thank you al2 for a tip.

At the same time, I will test the interchangeability of Kenwood blades with Hemlux.

[html]

not always before?
Depends on the site. On Ali, for example, you need to trim everything after the html

* JOKINGLY * On Ali just after html always ? and one hundredandt.
But yes, different sites have different tricks, you need to smell them.

Brothers, did someone try to order a bowl from an ice cream maker at the prfshop? Do they promise to fulfill? And in what time frame?

I already ordered for 6,190 + delivery, I'm waiting, they promise as much as 29.04 ...

Wow cool!
We are waiting for your report. The price, in comparison with the European ones, is good.

Quote: Chelokoshka from Today at 17:46
I already ordered for 6,190 + delivery, I'm waiting, they promise as much as 29.04 ...

Wow cool!
We are waiting for your report. The price, in comparison with the European ones, is good.

I will definitely share my impressions ...
And the price made me happy, I thought that it would not be possible at all.

Girls who have a discount on Kenwood Wood?

Brothers, did someone try to order a bowl from an ice cream maker at the prfshop? Do they promise to fulfill? And in what time frame?

Somewhere 2-3 weeks, they have new items -100% prepayment, then they send SMS and get it from them without additional payment.
In general, in theory, since they have decided on the price, then most likely someone has already ordered or ordered and everything may appear earlier than this period, this should be clarified with them.

[Prank]

Prank, Nadezhda, has someone already sent or go look for a card?

[Tan_ch]

Tan_ch, Tanya, please look

[Prank]

Prank, Hope, I accidentally made a mistake
I have a kenwood card. bt (if her number is needed, I will send pictures), and there was a discount code on kenwood ru, it no longer works, they write that it has expired
excuse me

[Prank]

Prank, kinla in a personal card

[Ketsal]

Girls, Ketsal, Tan_ch, thank you very much, at the same time I'll buy a soufflake at last :)
Interestingly, and I was not entitled to any card for the purchase of induction?

[Prank]

Prank, they didn’t seem to be allowed on the cookie chef.
Did kenwood_bt cards work?

[Miranda]

Miranda, I have nowhere to write it out, or I didn't find it, tomorrow morning I'll pretend to be a felt boot, I'll call and tell you to make a discount

[Prank]

Prank, right!
Also a spiralizer, right? Then tell us about the fifth disc, how it cuts.

We will not dock in any way, I would compare the disks in size from the individual and the attachment.

[Miranda]

Miranda, yes I want a spiral cutter and a soufflake. Don't say one thing or the other, I just can't find time to even cook a bird on the machine there for an hour, and even less with cash. And there is a video of all sorts of more real ones about this kah700, I just found it on YouTube. What do you think this attachment loses only by the fact that, say, a giant eggplant cannot be inserted from behind the hole? Yes?

[Prank-Hope]

eggplant

Prank-Hope, eggplant, for some reason, does not take the spiralizer, and the point is not in the size, but in the structure of this vegetable (I did experiments) ...

As for the nozzle, its dimensions are: height 21 cm, width - 16 cm, and depth 22 cm.
I compared (so far in absentia) with Gemlux: 1.5 - 2 cm wider in width, and in depth and height (I mean the body of the Kenwood nozzle (with a holder for a "horn" (with a blade)) and a loading "lid" with a neck ) - the same as Gemlux (most likely).

I already downloaded the instructions from some site, a non-nashen store (I don't remember (I think it's Italian Kenwood)), and there the sizes were indicated.

Then tell us about the fifth disc, how it cuts

Miranda, if you watch the video on this nozzle, then at 19-20 seconds three cups are shown: white with a wide cut strip; in a large glass, apparently cut into a 2 mm disc; and in a smaller glass - just these pieces lie, apparently, cut by this disc ...

[Prank]

Prank, with eggplant is a different story, bangs, the rights. It is not solid inside, but fibrous + seeds.

There was a whole battle in the topic of individual spiralizers, they say, horizontal ones will take whatever you want (well, if a vegetable / fruit suits, for example, mango due to its fibrillation, too, you can’t procrastinate, or a Chinese pear is strange, all other pears are ok, and the Chinese one is watery and difficult to spiral), and vertical ones are limited by the size of the tube.

But I can tell from my own experience of a separate one (and they have the same by all indications, but here they will bring you, and at least tell me the dimensions, or even somehow get there for a mixer, and grab one disc out of five, I would quickly try on ) - from everything that I spiral, I only adjusted the pumpkin. Potatoes, carrots, beets, zucchini, zucchini, apples, pears, daikon - everything is very ok. All of this is in the right size. The horizontal (for me) wins on cabbage, bell peppers (although I haven't tried it yet) and onions. But, spiral cabbage differs little from just chopped, and I reviewed the onion on YouTube, it also does not fit all, and looks like ordinary rings into which it breaks up if you chop it. In short, I like vertical ones more purely visually, in terms of speed and convenience to store / wash.

[Miranda]

Horizontal (for me) wins on bell pepper (although I haven't tried it yet)

Miranda, "tips" from the instructions for this attachment:

"Use hard fruits and
pitted vegetables or
empty core".

So ... but you can and should try pepper on occasion ...

(I never looked or do not look in the direction of horizontal ones, despite the fact that I adore spiralizers and vegetables / fruits cooked and prepared with its help (I have been hunting and chasing this car for a long time)).

[bangs]

bangs, Natasha, yes, I brought an eggplant for example, the first thing that came to mind, I have a difficult relationship with them, with eggplants

and in a smaller glass - just these pieces lie, apparently, cut by this disc ...

You can't see it there. I have 4 disks, and the fifth is a riddle.
And I can't find the article anywhere. But, I hope, since they began to sell, it will appear soon, or you can write with a question.

I really look forward to your stories and photos both on the nozzle and on this wavy disc. Maybe even write a review in the section

I really look forward to your stories and photos both on the nozzle and on this wavy disc. Maybe even write a review in the section

I will be happy to help you figure out what this section is and where to write?
After all, I often (for which many thanks!) Relied on someone else's experience in acquiring the devices I needed (or refusing to purchase them), so I am also ready to share my experience (all in anticipation (it would be nice to get a nozzle on April 29)) ...

[bangs]

bangs, here is the topic, everything is told there
Attention to those who bought kitchen and household appliances or electronics!
Write a review, and send it a personal message to the Chief. There you need a photo of unpacking, what it looks like, testing, conclusions. And then it appears here, there you can see how people write. https://Mcooker-enn.tomathouse.com/index.php@option=com_content&task=blogsection&id=106

I'm on nozzle mill wrote

[Miranda]

Miranda, Thank you!
I'll try it with pleasure!

And there is a video of all sorts of more real ones about this kah700, I just found 1 on YouTube

Here's another tiny video:
🔗

Girls, help me out, something happened to the food processor, I used it today for the second time, or rather tried.
I put, for example, a carrot and the disc is immediately blocked, then I found out that it is blocked at the slightest pressure, I connected only the connector and turned it on quietly, when pressed lightly with a finger it stops spinning. I ran through the search, I didn't seem to find one.

[Prank]

Prank, Hope, I have not come across, but maybe it was not collected correctly? Try to build on a new one.

[time]

time, Victoria, It does not work as it should without a bowl, you can not even collect ...

Do other attachments on this nest work?

the disk is immediately locked,

Did I understand correctly, when you turn on the machine, the disc rotates, and when you try to cut something, it is blocked? And so with all the disks?
And another question, does this happen when the lid is closed? You never know what
And the right question is whether the other attachments work.

Did I understand correctly, when you turn on the machine, the disc rotates, and when you try to cut something, it is blocked? And so with all the disks?

Yes

And another question, does this happen when the lid is closed? You never know what

when closed

And the right question is whether the other attachments work.

Blender, multi-chopper work fine

[Prank]

Prank, Hope, does the processor knife work?

Today my plastic lid from the bowl fell on the floor and a small hinged lid on it fell out of the grooves. Has anyone put it back in?
How it's done?

does the processor knife work?

I'll try, I haven't even unpacked it yet

Has anyone put it back in?

I could not get. That is, it seems to be inserted, but as soon as you touch the lid, it falls out. I stopped doing this, put this thing aside. Something with their lids and a protective case is not thought out.

Yeah. I realized thanks.

[Prank]

Prank, Nagy, but with different assemblies it turns out?
Let me explain. You can assemble - put the adapter, then the bowl, then the disc, then the lid. Or you can collect everything on the table and attach it to the assembly.

It’s true for me, but I noticed that the pimp of the lid closes a little differently in one and the other case.

And the rest - I can't even imagine. I would contact the service.

[Miranda]

Miranda, In a different way, even if I only put the connector on the socket, it turns, and I press it with my finger it does not withstand this pressure and does not turn, apparently something inside this connector has flown. It's over with the service, but first you need to get a 5-year premium guarantee to come home, but somehow you don't want to give everything for 3-45 days.

So, they brought me this toy - a spiralizer attachment. And at home there is nothing to cut: one sluggish carrot and potatoes.
I tried it on potatoes. Cuts! Now the potato noodles are boiling.
The nozzle is lightweight, compact, easy to assemble and disassemble. There are special features: each piece must be cut in turn: attach, cut, turn off, pull out the pusher, remove the remains, attach the next one. A vegetable that is not attached to the pusher is not cut - it scrolls. Therefore, it will not work to cut a pepper or a tomato, I think. That which has a loose or empty middle, too. But, in general, I liked it. Tomorrow I'll try to buy some vegetables for fun.

[Prank]

Prank, in theory, there is a premium guarantee by default. So I would have called like that. That's because


NatalyaB, show, please, the fifth disc, which cuts with a wave.
The potato does not need to cook for a long time, it will lose the spirals