Kenwood kitchen machine: working with attachments

For me, with the advent of the dough roll, dumplings have become a weekly entertainment. Today I did it with cherries. I think that this is a tribute to my Ukrainian roots. And for me, just with Kesha, everything became quickly and conveniently done. As for the sieve, I did not notice that the blade nozzle dangled in its nest. I even have to insert it with some effort. So far I wiped only cottage cheese for Easter, half a kilo is wiped in 56 seconds. I liked it so much, especially the cottage cheese itself at the exit. You can make curd mass.

[time]

time, Victoria, and I'm so addicted to rubbing a tomato that for the second year I don't buy store sauces at all. And raspberries ... Mmm ...
In September, with a broken arm, she rubbed more than 20 liters.



And, more apples-pears!
In general, the nozzle is not retracted in summer.

addicted to rubbing a tomato, that for the second year I don't buy store sauces at all.

[LisaNeAlisa]

LisaNeAlisa, Anita, good idea! In the summer I will try to wipe apples on marshmallow. And how I don't cut out the middle. still come across scales.

It is a pity that in our city the sieves ran out while I was thinking. I will hope that suddenly a copy will be thrown from another city. They disappeared from us a long time ago, and then suddenly a display case appeared in one mvideo. now 0 again

Yesterday I bought a sieve in MVideo on Varshavka, they have not been displayed in the hall for some reason, but I asked if they had taken it out of the warehouse. By the way, the boy-seller persistently tried to prove to me that there is only one nozzle, it is universal, suitable for any bowl ... I convinced him only with the help of the picture on the box on which both sieves are depicted that he does not know everything about what trades.)))
The pin from the blade is really thinner, but it fixed normally, and they checked it there, and the experience of our girls convinces us that you can use a sieve for a small one in a large bowl.

By the way, a "fluffy" whisk appeared on the site, there is also a hook for induction 096 there.

🔗

Someone has a harvester for a high-speed nest. If so, can you drop the number and is it convenient? I have a major 770 like the nest did not croak, but only a grater nozzle. Since there was not enough combine knife all the time in thought, or buy a separate harvester or a harvester attachment

If so, can you drop the number and is it convenient?

Very comfortable. And look at the number in the reference book. https://Mcooker-enn.tomathouse.com/in...911.0

Today I tried the cube cutter. The impressions are ambiguous.
1. The size of the cubes. They seemed to me very small. But I didn't cook a salad, but a sauce for eggplant pasta.
2. It may be more convenient for slicing large quantities of food. I had 2 eggplants, 1 pepper, 2 onions, 3 tomatoes. After each product, I cleaned the grate, and since uncut strips of vegetables lay on top of it, I had to first throw them off with a small knife, and then push the remnants with a pusher. That is, the process is more troublesome than when working with a food processor.
But maybe I was doing something wrong?

But maybe I was doing something wrong?

Maybe. I do not disassemble the cutter at all in the process. At the very beginning, when I digested the potatoes, it was like this - it stuck together there and hammered.

But now I do not digest, I cool it well, and alternate with something else - 2 potatoes, 2 beets, for example. The rest of the products do not require attention. This is if we burn about cooked. And if about raw - even more so.

I don't understand either. True, I usually cut the raw ones into cubes, then cook in a double boiler, if the vinaigrette or Olivier. Each subsequent vegetable pushes the previous one.A few pieces remain on the grate, then push through at the end of the process.

I don't understand either. I always start with softer products and finish with hard ones. Each next product pushes the remnants of the previous one and a small bar remains at the end of only the product that was laid last.

And today I made pizza and the machine was used as much as possible)) first the dough in the bowl with a hook and then the food processor worked) I did not do anything by hand except the pizza itself) I go crazy

Thanks for answers. Probably, when you are cooking something and the food must be put in turn, it is better to use a combine. And leave the cutter for salads and blanks. And for those cases when all products can be laid at the same time

[VRad]

VRadwhat do you mean by turns and at the same time?
Is this a break of a few hours? Because in any case, in turn, everything will not fit physically right away.

what do you mean by turns and at the same time?

Well, first I fry the onion, and when it becomes soft, I put the eggplants, etc. If you don't stop the slicing process, then a third of the onions will go into the pan along with the eggplants. Perhaps this is not important? You just need to change the way you look at things

[VRad]

VRad, ah, in this sense.
Well, so that not a gram is mixed - then yes. It must be stopped and completely cleansed.

But this is such a question. Like rubbing something after beets. For borscht, it doesn't matter that the carrots are colored with beet juice, or then with another disc, cabbage. And for a beautiful photo, if you are writing a recipe, it is important that you either plan the sequence or wash it.

[VRad]

Perhaps this is not important? You just need to change the way you look at things

VRad, and there is. In the finished dish, no one will notice that part of the product got into the roast a little later. The main thing is to relax on this score.

I'm crazy

Asvatova, from keshik it is not possible not to lose heart. Cooking turns into a simple pleasure.

In the finished dish, no one will notice that part of the product got into the roast a little later.

This is so if another product does not interfere with cooking later. Because the eggplant can leave the onion crispy.

But in the next branch they say that Kenwood's VK said that they are planning a spiralizer nozzle this year.

Otherwise, upon arrival, I ran to a group in VK Kenwood Russia, and there again was 8.03. were interested in whether there will be a sale of spiralizers in the Russian Federation, and this is what they answered on 11.04:

"There are no plans to sell the Kenwood FGP203WG spiralizer, but we have the same nozzle for the kitchen machine coming out this year" ...

So it will be possible to get hold of the nozzle over time ...

message for those who need Kenwood attachments.
Those who have a Globe in the availability of nozzles are selling at awesome prices
From personal experience

Spent Saturday, 600 r both ways on blablacar
Went to the neighboring regional center
In the end my catch
- roll for dough 1500
- fettuccine nozzle 1500
-blender 1200
-meat grinder 1800
- Kenwood Chef Sense KVC5100G 12000
Now I will have 2 kitchen machines
The only drawback of the car is that the plastic holder sometimes disappears
I will cure food silicone probably

I bought myself at Globus in Yarik. There was only a blender left after my foray
My catch in the photo

Yuhuuu: yahoo: now I am with rubbing and even at a nice price 2490

What miracles of unheard-of generosity.

Just a share in mvideo

[Asvatova]

Asvatovahow do you catch them there? I can not

how do you catch them there?

Recently, I have a nozzle mania))) and it all started with a globe and a mini grinder thanks to you, after that, in a month I managed to buy a meat grinder, a cube and a food processor, so I constantly tracked some kind of stock, in PM and mvideo. I have long wanted a sieve at least 992. And here they have an action this weekend in several cities, so the last Wishlist (dough sheeter and noodle cutter) ahead of them)

Girls, now I tried to whip homemade cream on Kesha. I asked my aunt to make liquid ones on the market, I don't know what fat content, but definitely more than 33%. Stood in the refrigerator for a day and a half. I whipped it in a cold bowl with a cold K-koy, slowly changing from 1 to 3 speed, somewhere in the middle I poured the powder. I was afraid to interrupt, somehow I tried to beat the homemade ones, the butter came out. This time they whipped into a good cream, smooth. Everything is fine, but I hear a smack, so I won't take them anymore. It's a pity, maybe it still depends on the cow, I don't know.

[LydiaVera]

LydiaVera, The taste occurs when the udder is poorly washed.

And who can tell whether it is possible to grind wheat grains, bran, etc. to the approximate state of flour in a mini grinder? Maybe someone has tried it and will advise the proportions of ingredients with such flour for bread

[Asvatova]

Asvatova, the shredder heats up and only a small amount is allowed there. Basically, powdered sugar makes, coffee is fine too. You can also try.

I grinded buckwheat, it will not work to the state of flour

[Asvatova]

Asvatova, tried to grind millet into millet flour. Heats up, yes. But somewhere 80 g in 2 times, each with a couple of minute stops, it worked. I didn't need more. But coarse, when sifting, uneven grinding was noticeable. But the most unpleasant thing was that there was a bitter taste in the bread. That is, in an amicable way, the millet first had to be thoroughly rinsed several times (as for porridge), then dried ... I did not repeat it, because suddenly a well-known company began to produce millet flour. While using it.
That is, in principle, you can. The question is of necessity.

Thank you all for your answers) and then I saw the grain in the store and I thought ...

Please tell me where to buy a curved knife and a grate for a meat grinder (very large, in which there are only 3 holes, for chopped samsa)? I saw somewhere in this thread, saved the store, but now the link is not active.
Well, I'll ask, maybe someone knows the reason. use chef for little whitewash. dough, minced meat, fillings. and so the drive for the meat grinder died after 3 months of work. not to say that they are directly heavily loaded. I suspect not even a meat grinder, but rather a cube cutter). because sometimes she got up crookedly. in general, so .. and they all say from metal, unkillable. well, under warranty, yes, they immediately replaced the engine and drive - now like new)

please tell me where to buy a curved knife and a grate for a meat grinder

There are many accessories for Kenwood, maybe yours.

🔗

There are many accessories for Kenwood, maybe yours.

Thank you! but looked here. no. they seem to be unoriginal (which are needed)

[kargy74]

kargy74, look at the household market. RU

[kargy74]

kargy74, take a look at

+1

🔗
🔗

See spare parts for the respective freestanding grinder. Check the square and diameter carefully.
This store has attentive sellers who understand their product.
I bought a similar knife from them on Bagrationovskaya. There was a very thoughtful uncle.
Check with him about grates.
In addition, judging by the fact that you are thinking about another knife, you have complaints about the work of the meat grinder.
It is possible that the problem is not in the knife, but in the tightening force of the clamping nut. It must be screwed in all the way using the included wrench. Then nothing will wrap around the knife, and the minced meat will not be pressed through, but cut, and, accordingly, the load on the engine will be much less.
And, of course, it is necessary to check the sharpening of the knife so that it fits snugly to the grate, right up to sticking, without the slightest gap.

More.
These are all the same household appliances, and for production, especially, the chef is too small and rather weak.
Perhaps it makes sense for you to think about a free-standing meat grinder. There are inexpensive models that work like a beast.
In particular, we have discussions on meat grinders on the forum, and among the favorites is a very budget model.
Good luck!

Now I have a question.
On the low-speed grater in the thread, the reviews are different and rather contradictory.
I would like to know more recent responses.
Now I have the opportunity to take it inexpensively, however, a budget option, only 3 drums and a plastic case, so I wondered if I needed it at all.
I ask the audience for help

[Olga VB]

Olga VB, Olga, I didn't even try mine and gave it to my mom. There is a high-speed one and all sorts of manual ones, I realized that I don't need it. Cucumbers, chopped onions and carrots for salad - Berner. Large volume workpieces are convenient at high speed. In the processor, in addition to the knife, there are grater attachments, if you rub something every day. I will not advise anything, but it was not useful to me.

Olga, I have had this grater for 5 years already, it was bought for the meat grinder, it is your version in a plastic case, but for 4 drums. I use only graters all the time. Cheese, chocolate, vegetables are always on it. Assemble, disassemble, wash quickly. I won't get the high-speed one for a piece of cheese or chocolate. These graters are more convenient for me than the processor and collect and wash faster, but who's used to it. Cheese for food and chocolate for ice cream are very convenient.

Do I need it at all.

Ol, I would take if at a reasonable price
Indeed, cheese, chocolate, and you never know what to grate in small quantities on it seems convenient to me.

[Olga VB]

Olga VB, and I'm very happy with mine. Always at hand, easy to put on the car, washes quickly.

Thank you suns
In the set that I was offered, there are only 3 drums - 2 slicers and 1 beet-type grater.
It turns out that I only need this beet grater
On the other hand, I have a hand grater with a bunch of drums, and I practically stopped using it after buying Kesha.
But a good price for such a nozzle does not happen every day.
Probably hapan, and then I'll think

Here, I almost forgot.
Someone complained that a plastic pusher jiggled.
There are different pushers on the household market, you just need to look to see if they fit, because there they go as spare parts for meat grinders, but at the same time, the attachments to the bases of the Kenwood meat grinder are compatible with attachments to our KM.
Good luck! And thanks again for your feedback.

[Marinuly]

Marinuly,

Indeed, cheese, chocolate, and you never know what to grate in small quantities on it seems convenient to me.

Cheese-chocolate rubs and processor. Is it really more convenient to screw / disassemble / wash the low-speed one? It didn't seem to me. And rubs somehow not as beautifully as the processor. In general, if there are no others or it is inconvenient to use a high-speed one (high, for example, or busy - something is done in parallel), if for some reason a low-speed socket is more convenient, then it will do. And so ... I have nothing to do. But I bought it!

I recently bought a 3-hole lattice in the krascasing online store. There you can choose for different brands.

Good day! experienced, tell me about compatibility:
now a new Kenwood spiral cutter is available on Amazon
🔗
On the Kenwood website they write about compatibility with models
🔗
Compatible with:
KVC * series
KVL * series
KMX * series
I have a Kenwood Major KMM 710.
I understand that this attachment will not fit on mine?

[leostrog]

leostrogThe spiralizer comes with a new mount.
The old one - with an adapter.

Oh, well, the price.

If someone is interested, then in the Moscow Profservice they finally decided on the price for: Bowl of attachment for the KENWOOD kitchen machine wiping sieve (2410r) and Block of blades for the attachment for the KENWOOD kitchen machine wiping sieve (1460r) for AT930, KAB930ME, so The same Bowl of an ice cream maker for the KENWOOD kitchen machine (1060r), which can be used as an additional bowl. All this is available for ordering. So now you can safely convert your AT (KAV) 922PL into AT930, KAB930ME :) fortunately wiping discs are suitable for both models :). Spiralizer KAX700PL is on ebay from 87 to 94 S

leostrog, the spiralizer comes with a new mount.
The old one - with an adapter.

Oh, well, the price.

Yeah. Thank you.
This thing is needed, right?
🔗
I'm not really sure at all. that I will buy something. He's already breathing on my own.
Again the bed was completely loose.I have to hold it with my hands when doing the batch. I have to carry it back for repairs, but it's heavy, bastard.

[leostrog]

leostrog, this, only the price is crazy, here at the office. site 1 thousand (990)

It is not clear about holding hands. The head of the car should walk, this is normal. You don't need to hold it.

no, this is not a normal movement. Here in this film, at about the 14th minute, you can see how the part with the fasteners at the Bork combine twitches back and forth - this is exactly what I mean