Kitchen machine Kenwood (2)

I'm watching the dialogue wiped. I asked about a site where everything is cheap and the sens 5030 costs 32,000 and nozzles for a penny. Give site

[Julya]

Julya, honestly, I don't even want to go to a branch where the last few pages of blatant rudeness and aggression .. we don't communicate like that, you probably made a mistake with the site.

I'm watching the dialogue wiped.

Let’s read the site in silence for a month, since you didn’t like the fact that your inadmissible harshness was simply removed in a decent society, without even giving you a verbal warning.

Girls, the action is still good.
I didn’t even dare to dream at the moment of a new Kenwood, especially in this configuration. As a result, there is a new handsome man with the attachments I need. If I buy more in the future, then I need only 3 (ice cream maker, AT511 and citrus press).
Everything is very reliable and of high quality.

The best part is that it was possible to replace the old Kenwood Prospero with a new sense with minimal costs, at the same time, for this reason, it sold out a lot of irrelevant things.

By the way, the AX642 (grater + press for berries) still went to the annex, the grater turned out to be inconvenient, too bulky, rather difficult to wash. And a press for berries may well replace a sieve. And there is a separate auger juicer.

[annnushka27]

annnushka27, I also want to buy from there. In our city they sell only outdated models at horse prices, from KM only 020, so I plan to buy from computers. The price difference is almost 2 times. And we have 10 thousand nozzles for the test, and there are 5 thousand each. In this store I bought a phone for my husband 2 years ago, everything worked fine. Above, the girl wrote that she also ordered from them in October, but the parcel did not go through customs yet.
I think m / u KM063 and induction 084/096.
I started by looking for a simple kneader in 20 thousand and reached a budget of 60 thousand

[Bagelikus25]

Bagelikus25, keep in mind that they do not send parcels heavier than 20 kg. Two years ago I had a desire to buy the 84th model there. I ordered, paid, and then an apology letter came. Money back. The weight of the goods is not always indicated correctly, and when the order is completed, it becomes clear what can be sent and what not.

[Olga]

Olga, Bagelikus25,

I started by looking for a simple kneader in 20 thousand and reached a budget of 60 thousand

Here! I feel that I am heading for this. and the purchase is delayed. Yesterday another 010th was offered for $ 400, and in that store the 770th, for $ 21,000

Girls, if anyone is interested, the package of Compunivers, export 15, 22 import, 23 left customs. I'm looking forward to my Kenya. And yet, for this store you can ask questions in Contact 🔗

[Belka13]

Belka13, thanks for the info about the wrong weight. The fact that I know the limit of up to 20 kilos, at first (before the description of Ritusli's throwing (hello to you))) wanted a KM063 multi pack, I even wrote to the custom service so that they took one nozzle out of the box, it went by weight refused)). Now I think, we can also need induction, but I don't know about it yet.
And the fact that the wrong weight may be in the description is news to me. I also thought to order 084. Her weight is 16 kg, so is this the wrong weight? Did you order and were refused?

[lou]

lou, hello fellow countrymen, I am also from Siberia. What exactly was ordered there, what was the status when ordering and how much was shipped and and what was the weight of the parcel?
I also wrote off with them, but they cannot say any information on the product and send it either to the description or to the official. website. I was interested in the difference between the KM063 and KM063 multi pack, but it didn't help me (.

[Natalia]

Wow how are youNatalia, wait a long time. Let Kenka come soon.
And I just can't wait.With impatience, everything and everywhere itching is straightforward until the desired object is in my hands.
Right now, the souffle scapula does not give me rest.

[Rituslya]

Rituslya, it was your enthusiasm that pushed me to induction). Are you satisfied with the unit change? It's worth it?

[Olenka]

Oh,Olenka, if my enthusiasm weren't so financially expensive, then I would be sooo happy. Now, as I remember how much it costs + how many nozzles I bought him already + from what else it would not turn out to be, then it becomes bad.
And so ... I agree with all the devils that if there are plans to constantly cook eclairs, custards, risotto and jelly, then induction is simply an irreplaceable thing. I heat up practically everything now. I now lack an extra bowl for it. And how Natusya writes, I am also afraid that I will suddenly turn on the heating. The head became completely perforated.
020 I was wonderful! I am glad that now he serves faithfully! Indeed, a good, worthwhile, high-quality item with a minimum number of attachments.

[Bagelikus25]

Bagelikus25

Hello everybody!
I ordered Kesha kmix50, I don't need attachments other than a dough sheeter (there is everything I need that I love). I ordered another frying pan, it turned out 14.5 kg. And the first time I ordered Kesha 57008 and a dough roll (then changed my mind), it turned out 19 kg. The first time I paid 31,500. And now in our flea market they sell this car without rolling for 57 thousand rubles.

Ritual

with our inflation, this is not a waste, but a profitable investment

Olya! : girl_dance: Great idea! I must tell my husband! So that he doesn't get upset!

[Bagelikus25]

Bagelikus25,

Her weight is 16 kg, so is this the wrong weight? Did you order and were refused?

Yes, I paid, and then they sent me a letter with a bunch of apologies, they made excuses for a very, very long time that they would not be able to deliver this machine to us. And then for some time the weight was corrected and they wrote that delivery to the Russian Federation was impossible. And now, I see, they are sending it again.
Although the 096 model also indicates a weight of 8 kg

[Belka13]

Belka13, I also did not understand how 084 has a weight of 16, and 096 has 8 kg, some miracles. There is no desire to order, wait, then they will cancel and get another exchange rate difference.

[Olenka]

CertainlyOlenka, good, high-quality, solid equipment means a lot. I also used to go to the kitchen without much desire. Well, yes, pasta there, boil-fry potatoes, bake pancakes, well, something else ... Well, it's kind of standard. And now it became the most interesting: why am I going to bother with purchased pasta when I myself will do it, and even more so so many assistants. And what assistants !!!
And as for the purchased bread, and generally keep quiet.
No. No, of course, there is complete desire, interest, and focus on success. It is wonderful!
True, lately I have only an envious ass - I’ve been running around the nozzles and buying them, and I don’t get to use them for their intended purpose. The main thing is to be

[Bagelikus25]

Bagelikus25, you can send them a letter in English or German with a request to clarify the information. I think they will answer quickly.

[Rituslya]

Rituslya, I am the same. All the most powerful and new and more). And the attachments are all, maybe they will come in handy later. Well, I'm talking about plans

[Rituslya]

Rituslya, I know what you mean! I have the same disease. I bought all the attachments for Kesha, and some of them did not reach my hands. So, for example, I didn’t use a flour mill - I’ll see some rare flour and buy it. But everything is there and at the current rate is not so expensive. And we can't milk the purchased pasta in any way to start making homemade ones.

[Belka13]

Belka13, I wrote off with support in VK, they can't say anything intelligible. Like everything is in the description. I'll try in English. write to them directly, or by trial to act-order.

[Belka13]

Belka13There is no desire to order, wait, then they will cancel and get another exchange rate difference.

Olga, Don't worry about the difference.
They debited me from the ruble card at the exchange rate.
The refund was penny to penny.
So you won't be able to either lose or earn on the course

Hello!
Please consult.
I here put up for sale a kenwood KMC 57008 kitchen machine with a set of attachments.
Kitchen machine KENWOOD KMC 57008 with attachments for sale
But nobody is reacting. Does anyone need it or have I set the price inadequate?
Tell me, for how much is it really possible to sell this car in St. Petersburg with the specified set of nozzles?

[Paul I]

Paul I, in general, of course, 53 thousand are expensive.
When did you buy it? How old or months old? Is there a guarantee?
read the year to her, right?

to be honest, I would put thousands for 35))
no one will buy for 53, don't be offended)

And so the machine is cool! I had such, though the 560 model. but the same as 570))

to be honest, I would put thousands for 35))

With the set of additional attachments indicated by me or in the basic version with a meat grinder and blender?
Do they lose so much in value over time?
And I thought that Kenwood is almost eternal values ​​and is inherited ...
It seems to me that devices of this class should lose in price over time no more than cars or iphone.
As for the guarantee, it seems to be not relevant. I am not aware of any breakdowns of these machines. Kenwood claims that during the entire sales period there were no calls to the service.

Kenwood claims that during the entire sales period there were no calls to the service.

Well, it is profitable for them to say so. In fact, there are cases, even in this thread they wrote. Most often, of course, when initially a manufacturing defect, but also cases of breakdowns within 1 year of use were also

Kenwood claims that during the entire sales period there were no calls to the service.

This, to put it mildly, they are dissembling.
If I were you, I would try to sell everything separately. It will leave faster and, most likely, it will turn out to be more than 35000.
Although she herself sold her 560th last December at half the price of the store price at that time.

[Paul I]

Paul I, see we sell 560 kenwood with a meat grinder and blender, as it comes from the factory.
for 17 thousand
https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&topic=431982.0
Unfortunately, now the prices in stores are unrealistic. Before all this, he cost 30 thousand with two nozzles.
Therefore, no one will buy for 50, maybe you can take an induction model for 60)
And nobody charges for 58.

That's it. It's a shame, but you need to sell it, so adjust the price and don't want to send it in vain. There would be more demand)
Good luck!

Well, or as advises Ksenia, sell separately.

Well, that is, do you think that Kenwood has an inadequate price for their quality?

Ir, how we are with you at the same time
Nothing seems to stop me from putting the car on a 5-year warranty. True, it is necessary to clarify whether they have this model in this list.

Although she herself sold her 560th last December at half the price of the store price at that time.

Well, the store price for my kit is now 80,000. So what should I sell for 40,000?

Nothing seems to stop me from putting the car on a 5-year warranty. True, it is necessary to clarify whether they have this model in this list.

What are you talking about?

Kenwood has an inadequate price for their quality

In my opinion, it is greatly overpriced, especially among the officials. Therefore, when promotions are arranged (attractions of unprecedented generosity), the cars are immediately bought up. This particular discount price is more true. This is my opinion.

And so the machine is cool! I had such, though the 560 model. but the same as 570))

What is the difference between 560 and 570 models?

What are you talking about?

On the official website, you can make a 5-year warranty by registering your car. A 5-year warranty certificate will be emailed to you.

🔗

What is the difference between 560 and 570 models?

The difference was in the set of attachments. I had nothing but whisks.

[Ksyusha]

On the Kenwood website, you can get a five-year warranty, but you need a check for the car.

The difference is nothing, maybe in the design and that's it)

Ksyusha, and I had both a blender and a meat grinder.

you just took the naked one.And in my box with the car there were two more boxes with nozzles.
And also a 560 model.

Yes? And I didn't seem to have. And, in general, I don't remember a damn thing. I bought it, God knows when: pard: But the meat grinder and blender were there from the very beginning, but I could have bought them myself.

[Ksenia]

KseniaIncidentally, I was not naked to mine.
You probably beguiled))
if there was a blender and a meat grinder, then they were with a machine))

[Mash]

Mash, maybe beguiled. Many years, no memory. Just then I immediately bought almost all the attachments that were needed, so I don't remember what was in the kit.

[Belka13]

Belka13, and when they ordered the 084 model, what was its actual weight in the refusal? Should I try to order it again? Can you feel better already?

[Bagelikus25]

Bagelikus25, they wrote that her actual weight turned out to be more than the allowable one, and then the information about 21 or 24 kg hung on the site, I, unfortunately, do not remember. In my opinion, the weight on the box is 24 or 25 kg. I remember that I even asked to split the parcel into two parts - they refused very politely.

Girls, tell me the rolling out for the dough is convenient or not very convenient, I had a manual one that was not very convenient, so I doubt whether to take it or not. and on another site it is for 2910r what do you think such things are forged or not. It's just that the price range is large.

[Leysan312]

Leysan312, I liked it more than the empire with the motor.
Rolling out for that kind of money is generally a gift. Just be sure to check if it fits your kitchen machine.
AT970 fits Chef and Major, AX970 fits kMix and Chef Sense.
971,972,973 is a noodle cut

Anya, thanks, then I will order.

Anya, thanks, then I will order.

And tell me on which sites you can order inexpensive nozzles?
Need AT340, KAB992, AT641

[Belka13]

Belka13, thanks, I will think. P.S. what was bought in the end and where, if not a secret.

[Bagelikus25]

Bagelikus25, bought the 094th model in March this year for a little over 60 thousand in Vstroyka-Solo. For this price is now available on the Xcom-dom website. What city are you in?