Kitchen machine Kenwood (2)

Fully melted will be chewed with any meat grinder

This is not entirely true.

A normal good meat grinder - takes fresh meat with a bang, and if with a reverse, then the veins are not terrible.
As far as I understand, there is no reverse for the meat grinder in the combine ...

In my separate Kenwood meat grinder with a reverse - only soft meat needs to be rotated!
There is even a warning against frozen in the instructions, it is better to defrost.

, I'll go find instructions ... I have soft meat chewing ..., although also with a reverse, and frozen - excellent ...

I had such an old meat grinder from Mriya - you almost freeze the meat and everything gets hammered, clean it every minute, oh, and I got tired of it.
With a new one - I don't know any grief for 3 years already, it takes everything, including fresh warm lard
And in an old piece of bacon - what a sentence to sign

I have MG510, 1600 power ...
🔗
Oh, right now they will drive me into a meat grinder ... It's just very interesting, these Kenwoods come across different, in the sense that not everyone is lucky. And so I want a kitchen. car, but I also really need a meat grinder. Is it worth it or not to change? Or is it better to leave it separate?

I have MG510, 1600 power ...

Oh, right now they will drive me into a meat grinder ... It's just very interesting, these Kenwoods come across different, in the sense that not everyone is lucky. And so I want a kitchen. car, but I also really need a meat grinder. Is it worth it or not to change? Or is it better to leave it separate?

God forbid, change it to a combine one - this is an excellent meat grinder with a reverse, I have the same
They won't be chased, we compare

natushka, I just thought: is the knife inserted correctly? Once, in thought, I inserted the knife on the other side, so all the meat chewed. Check if it is assembled correctly. This harvester simply does not know how to grind badly.

My grinds are not always normal - he, the poor fellow, does not have enough tension, so he barely chews .... And a small chopper also does not always grind the greens well. And today I put a bunch of blenders into the blender - bang - and that's it ... Well, maybe your voltage is low ...

The speed should be -4 !!!! It is important!!!!! I have ANY meat with a bang ...

Girls, she grinds everything perfectly. Read the reviews above.

natushka, I then thought: is the knife inserted correctly? Once, in thought, I inserted the knife on the other side, so all the meat chewed. Check if it is assembled correctly. This harvester simply does not know how to grind badly.

The knife is inserted correctly. I have been working with more complex and high-precision equipment for 25 years, and I have never been afraid of kitchen equipment, I always use it according to the instructions and carefully out of habit. Speed ​​4! (according to the instructions) put it. Voltage 220v - measured with a tester. I don’t know what’s the matter anymore. In the photo zvezda- the meat comes out with sausages, like from an ordinary meat grinder, and mine is mush like porridge and thanks to everyone for their support

[Natushka]

Natushka, maybe, before it's too late, drag it to the store and change .. Or, let them show what is wrong, or let them change ... Good luck, it's a pity that this is how the acquaintance with the car began

[Natushka]

Natushka, maybe, before it's too late, drag it to the store and change .. Or, let them show what is wrong, or let them change ... Good luck, it's a pity that this is how the acquaintance with the car began

Yes, there is nothing to change, I have already changed it for this one, since the first nozzle in a rubber shell for creams was not inserted. I asked about the meat grinder, they said "it works like that," it means it's not a marriage, they don't know anything else.

The speed should be -4 !!!! It is important!!!!! I have ANY meat with a bang ...

With a request, could you take a photo of the meat grinder in the same angle, so that the junction of the meat grinder with the combine could be seen.(without meat) Thank you

: flowers: natushka - So normal?

[matroskin_kot]

matroskin_kot
Irina, with a new avatar of you
But granddaughter, it's still better.

Thank you, well, the family of felines is on our forum, if not in the avatar, so in the name. I’m a cat, after all
And my meat grinder, it seems, does not fit so tightly ...]

: flowers: natushka - So normal?



Thank you! The gap is almost the same. Now I think maybe the knife is dull

Girls, I have joy !!!
I already lost hope that I would find a wiping sieve for my machine.
The manager at Media Markt said that they are not in the warehouses in St. Petersburg or in Moscow, and when they will not be known. And today in Eldorado I saw and was stunned! There are wiping sieves for Kenwood chef / major machines, and even with a huge discount!
Here's my new attachment!

Thank you, Asterisk !!!

Congratulations, great purchase !!!

Thank you!!!!!
Terochka rarity AT 998 - !!!!!
With 6 graters, but in fact 8 + 1
Since two graters are two-sided plus a bean shredder.
Judging by the fact that there are no high-speed shredders, then when they appear, it will be a new shredder.
It would be nice with cubes!
Then I would have got one more

[Anya !!!]

Anya !!!How is the sample high speed ???

Samples were on the "last breath"
Since I went to meet my long-awaited miracle, I was no longer in a very good condition.
Three days with a temperature.
But I’ll be okay and I’ll go into battle. I managed to chop the carrots coarsely and finely.
Shredded cabbage for cabbage soup - for soup that's what you need.
I couldn't think of the best way to chop cabbage for Star Cabbage.
And what is the best way to chop a tomato and onion?
And how to deal with scattering? Looking for the highest possible saucepan?
But shreds ................. ....... Beast!
At a minimum - with a whistle - 1 - fly away!
No more! A pot of cabbage for soup - chopped in the blink of an eye.
it took more time to find the "third hand" (it was not enough: -to hold the container))

Zvezda Askony, a little shredding tip: if you press the pusher while shredding, the pieces will be thicker. And if you wait until it flies by itself, then it is much thinner. And I adapted like this: I substitute the bowl that is in the saucepan. I'll take a photo later. And I bought a bowl higher for these purposes. And the tomato is not chopped, it turns out very finely. Now the radish has gone, very convenient. It must be filled up all at once - it strikes very subtly. And for green onions, take the same grater that is for green beans.
I was glad to help. Use it to your health!

Hello!!!
I have been reading you for a long time, but I could not register. Little Kenwood has been living in my kitchen since autumn !!!!!
We went to look at the meat grinder, but we saw a typewriter and my husband said we take it. Bought on a stock:
Dough mixer
Blender
Meat grinder
Juicer as a gift
Bought separately for citrus fruits.
Keshoi is 1000% satisfied. My husband is a hunter, we process a lot of meat.

The promised photo. It turned out a little dark, today it's cloudy, and even the flash does not work .. I hope the stand is clear.

The promised photo.

Thank you !!!!!! I painted something like that.
She took a drushlag, turned it over, and put a high saucepan on top.
Chopped onions. Now the onions and carrots are ready-made in the freezer. Hooray!!!!!!!
Now I'm thinking about which disk is best to chop cabbage for pickling.
I'm waiting for help from the audience.
In that "we work with nozzles, there are all 998 shredders.

Girls, in the old topic somewhere there was a reference where in Ukraine you can buy a silicone spatula from Kenwood, my child ate it, but it is so convenient ... do not tell me where to buy? thanks in advance!

I have the largest shredder for pickling shredded cabbage.

Girls, I didn’t talk about the kitchen before - yesterday I wandered into second-hand stores for a few minutes, found one point where books in English were laid out on two tables. Four shots especially interested me - cooking.Imagine what my surprise was when I found the book on CM Kenwood! with recipes! In general, I got it at the expense of a discount for free. And today I finally took a closer look at it. Book (hold on!) Sixth edition, 1969! Kenwood chef still has an angular design! With two speeds! The attachments include a blender jug ​​(high glass), slicer (drum type), a potato peeler, a bowl with a K-shaped nozzle, a can opener, a coffee grinder (coffee is poured into a placed bowl), a meat grinder, a citrus juicer, a colander / sieve. The book contains about 350 recipes. Mentioned cars chief, chief, kenmix, major.

Book (hold on!) Sixth edition, 1969! can opener,

Blimey!!!! Rarity!
Interestingly, and now they make can openers !?
Gamma over there, that is. For me it is relevant, since I am not on friendly terms with ordinary bottle openers (and not depending on the type and type. All handles are apparently "magic" break and open badly).

Blimey!!!! Rarity!
Interestingly, and now they make can openers !?
Gamma over there, that is. For me it is relevant, since I am not friends with ordinary bottle openers

And my Gamma does not have a bottle opener in the kit ... It's a pity ... I am not friends with bottle openers either ...

Dear Kenwood owners, tell me if the A930 attachment (which is for the major) is suitable for the chief010. I have already ordered a nozzle, now I'm worried

[Zvezda askony]

Zvezda askony ! Electric openers are on sale everywhere! I have it combined with a sharpener, a great piece!

And the 930 is a sieve wipe? So, like At 930 and there are cars from 010?

Yes, it's a sieve. To the chief A992, and to the major A930. I just saw it, and the nozzle is already on its way. Maybe they are not different but

[Polik]

Polik
The only difference between the A 992 attachment and the A 930 is that the 930 (Major) has the rod itself (what you insert into the socket with a planetary motion), on which the blades are attached, is thicker in diameter than the A992 (Chef) ... Otherwise, there are no differences. For owners who have KM Kenwood 020, the purchased A992 nozzles came up, but on the contrary, they did not try.

[Polik]

Polik, which city are you from? And in which store did you order the A 930 attachment?

I am in Moscow, and I ordered the nozzle in Ukraine. It turns out that the blades will not fit into the nest?

No, the blades have nothing to do with it. The rod itself, on which the blades are attached, may be larger in diameter. In our topic about CM Kenwood, there is a photo with this attachment, look, and you will immediately understand everything. Will someone of their own bring you to Moscow? Or did you somehow agree on delivery to Russia? And please write in which Internet store in Ukraine you found the 930 nozzle, pliz .... I'm just going to go to Ukraine.

I have a Kenwood KMM 760, the required nozzle is 930, but I bought 922, it fit perfectly!
Pay attention to the diameter of the pin, I measured it exactly 1 cm. It should sit firmly in the socket, measure the diameter of any available nozzle, well, at least a mixer nozzle, to know if it will fit you.

I have relatives there. Online store Foxtrot. Prices there are 2 times lower than in Moscow. But with the presence of trouble, though in Kiev on Frunze Street there is an office there, the price and availability, BUT prepayment is 100% (not the fact that the money will not be lost) if you take the current yourself.

Measured-8mm. So it won't fit?

[Polik]

Girls, well, I'm about the same. Whoever has KM 020, (and 760, is the same in size), then the sieve for the chefs fits the major. The question was whether the sieve from Major (20) to Chief (10) fits. Nobody ever talked about this in the topic. As I remember, visually, when I entered the store, the very base of the whisk, the K-shaped nozzle, as well as the hook from the KM 020 looks thicker than that of the KM 010. The A 992 sieve nozzle (chief) came to my car (20) ... But the "pin" itself, on which the blades are attached, wobbles a little from side to side, that is, it does not sit tightly in the socket. This does not affect the operation of the nozzle itself. And if I bought a nozzle that should go exactly to my 020, then the nozzle would be firmly inserted.
Polik, if you then try to insert the nozzle that you receive into your CM and it fits, then write to us, we will know. Maybe in the future it will be useful to anyone.

The potato peeler and the ice cream maker are different - definitely !!! They have different heights !!! 020- higher than 010 ....

Of course, Major's potato peeler and ice cream won't work for Chef, and vice versa. The difference in bucket height for these models is 3 cm. We cannot find these attachments for (20). Everywhere on sale only at 010.

If mine does not fit, maybe it will be possible to exchange with someone? I live in Moscow.

[Polik,]

Polik, if you don’t find someone to exchange with in Moscow, I would gladly change my A 992 (Chief), use it several times, completely new, to your A 930. Since I have a KM Kenwood 020, and I could not find a sieve attachment on it. I will compensate for the postage.

If mine does not fit, maybe it will be possible to exchange with someone? I live in Moscow.

Hello Polik!)))) I also live in Moscow and have AT 992 A, and I also wiped cottage cheese on it once. So, if you are not confused by this fact, ready to exchange for your AT 930 A
And also, and also, well, a very good ice cream maker with a potato peeler, but there are no acquaintances in Ukraine, and here it is unrealistic to find them! so I'm also ready to redeem them from you))) !!! Hope, believe and wait
P.S. Even in the afternoon I wrote to you in a personal on this topic, but you see you did not look there. I will really wait for an answer: by

And taking this opportunity, huge hello to all the girls who live on this site! I've been reading you for a couple of years already, you are all like family to me already))) And thanks to you and your invaluable experience, I also bought myself Ken 020 and I am infinitely grateful to you! I have been using it for the third year now and have not been disappointed for a moment!

Well, how is it - no acquaintances? And we ?

Has anyone met km 030 or 040 for sale? Or are they not being sold yet?

On Ukrainian sites, marked "on order" ... And the price there seems to be TAAAAAAAYAYA