Kitchen little things (2)

I know for sure that aluminum can not be placed on glass ceramics, as if circles remain there

I used to have ARDO glass ceramics 2007 mechanic, here on it sometimes streaks from an aluminum pan appeared. The divorces disappeared over time, which means that this is just a reaction of the surface itself, this did not affect the functionality in any way.
Now I have a glass-ceramic PYRAMIDA sensor, nothing does not appear from the same pan. And there is nothing in the instructions about this.

[Makovka]

Makovka, Lena, don't worry. When something breaks in our house, we say the evil eye burst. This is how we calm ourselves down. And it immediately becomes easier.

)))) or maybe my hands have grown from the wrong place)))

[Makovka]

Makovka, Lena, in the summer my 6-liter stainless steel pan suddenly burst in the middle of the height by a length of 3-4 cm. Just a gap formed out of the blue! Moreover, there was an impression that from within the side of the pan was hit with a chisel, the edges are curved even slightly outward... It's still a mystery to me how this could be!
I carefully knocked out this curvature with a hammer and it turned out that the gap now does not allow water to pass through, only if the boiling water is slightly oozing. Well, I pour 3.5 liters of liquid to the crack calmly. Still, it will be necessary to take the pan and weld it with argon welding.

[Makovka]

that's what I meant about aluminum. Copied the correct explanation.
------------------
It is not allowed to use cookware with an uncoated aluminum or copper bottom, since, being much less hard, these metals interact with the surface of the stove and leave traces on it, which negatively affect the service life of the hobs and their appearance. Aluminum and copper cookware should have a painted or steel clad bottom.

The situation is such that the use of unsuitable dishes will not lead to an immediate failure of the stove, but will only significantly affect the speed and uniformity of heating. Immediately, and even then not always, traces of aluminum may appear. But constant neglect of the rules will lead to rapid burnout of the heating elements and will cut the life of your hob by more than half!

The statement about the use of bare bottom aluminum cookware requires comment:
indeed, aluminum cookware made of pure aluminum (these are lightweight stamped pans, pots) will leave marks on the hob (if the bottom is not covered), so they are not suitable for glass-ceramic hobs.
But cast aluminum cookware is made of an aluminum-silicon alloy that does not leave any marks on the hob, even if the bottom of the pan is not covered.
So the cast aluminum cookware is great for glass ceramic hobs. And its thick walls and bottom are an additional guarantee against deformation (in contrast to thin stamped products)!

Manufacturers of glass-ceramic surfaces strongly discourage aluminum-to-surface contact. This information is in every passport for glass ceramics. Whether or not to perform an expensive experiment on its surface is a consumer's own business. However, if 5-8% silicon is added to aluminum, it does not cease to be aluminum. And if traces of aluminum appear on the surface, the manufacturer will not accept the claim.

----------------
that's the type of all this I read and decided to change the dishes to stainless steel. I also use cast iron pans ..
well, I'm a coward and I'm afraid)))

Makovka, Lena, in my summer a 6-liter stainless steel pan suddenly burst in the middle of the height by a length of 3-4 cm.That's just a gap formed out of the blue! Moreover, there was an impression that from within the side of the pan was hit with a chisel, the edges are curved even slightly outward... It's still a mystery to me how this could be!
I carefully knocked out this curvature with a hammer and it turned out that the gap now does not allow water to pass through, only if the boiling water is slightly oozing. Well, I pour 3.5 liters of liquid to the crack calmly. Still, it will be necessary to take the pan and weld it with argon welding.

and I also have one decent thick-walled 3.6-liter saucepan and I definitely did not drop it !! and there, from the very top down by 4 cm, a crack formed and it is also not clear when and how. But I use it, I just pour a little bit of smaller liquid .. it was a pity to throw it away ... I bought exactly the same second new one ..
I drew this conclusion and realized that the hands of ... experience are to blame for everything.

It was a pity to throw it away ... I bought exactly the same second new one ..

I will not buy a second one, it is expensive and there is nowhere to store so many large pots. I also have enamel for 8 liters and thick aluminum for 6-7 liters. Enough, where there are so many.

prices are expensive .. I myself feel .. sometimes the stash has to be taken out)))

[Makovka]

Makovka, I have a very similar mantle cooker, only the handle on the lid is shiny.

[his]

And I, girls, ordered ..

Lena, I want to share his opinion on this steamer: I was once puzzled by the purchase of a steamer and considered Horso's one as an option and even wanted it for a long time. But one day I saw her live, and I didn't like her at all. I turned it over in my hands, turned it around, somehow bent, there are a lot of silicone - there are few holes and they are very small, and I didn't want it. Why do you need it? After all, this is not a saucepan, this is an insert in a saucepan, and the inserts from your double boiler remained broken. You just need to choose a pan of the required diameter for your inserts and you will be happy.

I made conclusions and realized that the hands are to blame for everything

Girls, my friend and I faced a similar phenomenon: in the sets of pots bought in the same store, at the same time, after a while, vertical cracks appeared, moreover, only in pots of the same displacement. The husbands explained this by a factory marriage The pots were cut like butter with a hot knife - evenly ... it was not possible to replace the sets, although the sets were still in stock, but this size was not in them otherwise, they were already distributed to those who had burst before

Dropped my eyes on the mold for forming cutlets
🔗
Did someone use it?

[Daria]

Daria, I gave it to my mom
Good thing

Good thing

I just thought, I have this lying around, why am I completely crooked

And I'm lying around, a huge cutlet turns out.

I just thought, I have this lying around, why am I completely crooked

Sistra !!!!
I'm going to give mine to my mom. Firstly, the size is not small, and secondly, a lot of fiddling with it

Firstly, the size is not small, and secondly, a lot of fiddling with it

I have lies for the same reasons. And the size is really HUGE!

And I didn't get accustomed. I messed with her once. There are many actions, but little sense. Well for 200r I bought it somewhere. Lying around now, so at least the money is not particularly sorry.

[Svetlana]

Svetlana, Inna, Anna, Natalia, well, I'm not the only one like that, a mountain off my shoulders, there is a whole company of us

There are many actions, but little sense.

so I don't like when there are a lot of stupid actions, for burgers it is probably better to buy a metal press (I saw it in Galamart and cheaper)

for burgers it's probably better to buy a metal press

Yes, 100% better. I bought it on Alik and I'm happy as an elephant. She sprinkled a whole container of cutlets in 10 minutes. And they are thin, perfect in diameter for standard burger buns from the store (yes, yes, we are all handy and can bake buns ourselves), and during frying, these patties do not swell up.

Dropped my eyes on the mold for forming cutlets
🔗
Did someone use it?

I have a form like this. I bought it for a long time on Aliexpress. The cutlet seemed very large. Therefore, I do not use it.
Then on the same Aliexpress I saw and ordered a similar triple form. There you get three regular-sized cutlets.

Does anyone have such a basket mesh? I would like to hear feedback. Convenient? Reliable? Are you using?

🔗

I bought it on Alik and I'm happy as an elephant.

and I got drunk it was much more expensive than plastic, looked in Galamart, he now needs to take 189r

Almost 500 rubles on Ali

Almost 500 rubles on Ali

yeah, that's why I didn't buy it. Now, in general, if I find something on Ali that I need from small things, before grabbing I look in Galamart or in the fix (maybe there are still similar magazines), since we began to sell a lot at a price two times cheaper than on Ali

[Svetlana]

Svetlana, yes, because they buy in bulk there and the price is much cheaper. I was recently looking for the right thing here, just buy 450 rubles, and wholesale 1500 for 10 pieces

There you get three regular-sized cutlets.

And what is the diameter of one cutlet?

I forgot to write - I got Vileda napkins. Very good! Wipe everything fine and without streaks
I have already thrown the link to my daughter to take it for herself. if the quality does not deteriorate, I will only buy them. Although I have Belokotovskaya.

Vileda napkins.

What, spongy or some other kind7 I have no napkins for some reason. no matter how much I bought them here, I threw everything away in the end.

[gawala]

gawala, Galinayou take away too much

And what is the diameter of one cutlet?

About half of a large cutlet. Unfortunately, the line was "out of the availability zone"



They can also make filled hamburgers.

you clean up too much

Every day I wash the floors throughout the house and drive the dust ..

This napkin

If that's enough for a month, then for such a price (159 rubles) I think it's great.
I have sooo many different napkins-towels, but this whole bunch is useless. Bought travel - used - thrown out - bought new ones. And they don't take up an entire shelf in the closet. We need to sort this out somehow.

Good morning. We just discussed the prices for a press for cutlets, and in the topic of a pizza oven, a scapula for removing a pie, as Ozone sends an offer - you were interested ... and the price has already been reduced, that's for sure a scout is sitting on the HP

[Svetlana777]

Svetlana777, Sveta! So who would doubt it! Surely not a bad part-time job for someone!

[Svetlana777]

Svetlana777, so we have a theme about Ozone. Isn't there a representative Ozone answering questions Avatar Ozon

You were interested in this ... and the price has already been reduced, that's for sure the scout is sitting on the HP

Well, that's good - let them track potential buyers. Offers make us more profitable

[Svetlana]

Svetlana, the search engine can do it We are all under the hood.

Came to report
You started here a topic about jars for cereals. So I was puzzled. I ordered it on Ozone, and yesterday I went to Fixik, here are some purchases:

Bank for bulk Idea - I liked it very, very much! I bought a rag out of a herd feeling, everyone praised it. Although, she herself would not have taken this in life. Well, I'll try
And all this is not entirely on the kitchen trifles, but nevertheless. This is a sticky cork board. That is, you can stick it on the wall, and then attach something to it using the pins. Many years ago I saw something like this in the kitchen in some TV show, the owners were hanging pictures of children there. Has sunk in the head, and here it is! Took a try, until the repair was made and there is little to do. If it doesn't take root, well, it's not a pity. But I will try, and it is in the kitchen

In general, I created a semblance of order on the shelf with cereals. In the end, this is what happened:

It was



Has become
Back row


Near


Not everything fits yet. I'll buy a few, otherwise the packages remain. I have a lot of different cereals, and all kinds of pasta. Rectangular containers - from Ozone. 0.5 and 0.75 each.It turned out to be the most suitable size for me !! High, slightly oval - Idea, 1.5 liters. They are super! The form itself fits in the hand, there is a recess, it is convenient to take it in the hand. The only thing is that they do not fit on top of each other in height. That is, space is lost. And if there is no problem with that, then I would just buy them.
But the Ozonovskys perfectly stood on top of each other. Saved me a lot of space

I saw the Archimedes containers. Until I took it, I need to think about what to use it for. Found mats for the refrigerator, but colored, white was not.
In general, as usual - everyone is a big merci !! Moved me

This napkin

It seems that I have not met this one. Although I rarely stop my eyes on such things .. Probably because they do not linger with me .. Yes, and my husband hates all these rags, rags. So it turns out that I have no paper towel alternatives.

I have no alternative paper towels.

I also love paper towels, they are irreplaceable in the kitchen! Wipe it up and throw it away. I buy the cheapest. And it is necessary to wash the rag, make sure that it does not stay wet and does not smell. My husband likes to wipe it with a wet rag, then he won't wash it, won't wring it out, and just put it on the edge of the sink. Well, she also "loses freshness." It is useless to talk, his brains do not think otherwise. So I go and wash everything and check.

the search engine can do it. We are all under the hood.

I know about this, the search engine does not make discounts, but I mean that we only discussed small things and prices for it (and they indicated that Ozone is more expensive) and they immediately bang and discount

I bought a press at a local small shop. The last, or maybe the only one was.

Price for Ali

Also available on WB, the price is nicer

🔗

[WIKI]

WIKI, great price. I bought rubles for 300-400 on Alik, and it was supposedly a "sale" they had.
I also bought round pieces of paper, it is convenient to make blanks with it. But of course you can just cut the baking paper.

edSlckxs "target =" _ blank "rel =" nofollow noopener "> -1px;"> edSlckxs

Before each bookmark, you need to moisten the mold in cold water. Then the cutlets fly out of shape with a bang. I just rinsed under the tap.

See how pretty

🔗

See how pretty

pretty, only lamented reviews .... a long time ago there were so many bad ones. I would buy this from glass

I bought a press at a local small shop. The last, or maybe the only one was.

Galamart also has:

🔗

[WIKI]

WIKIhave you tried this press? What do you think? Is it worth buying?

No, the main thing is to buy. I put it on the top shelf, if only not to forget about it
There is still no one to eat burgers (I don't eat buns, my husband is fasting)

No, the main thing is to buy. I put it on the top shelf, if only not to forget about it

, the main thing was

Only here there was a conversation about this press, I go into the store - and he jumps right in my face.
How not to take it?

How not to take it?

No way !! And even if it jumps directly .. there is no escape