Is the computer dead or sick? Express help!

Let me disagree! They have an undeniable advantage - speed

exactly. recently put at work in a laptop ssd - so he began to fly. and infa ... and infa lives on the old hard one from the same laptop. Conveniently.
And Linux ... HERE honestly. I even crossed paths with him, but I'm not going to advise someone to do something through him. painfully he is not friendly

Peace be with you bakers!

Again

Let's speak in Temka with a language that is less accessible to everyone so that there are no repeated questions

I already shared a restoration with a friend at an old job, for sale, decommissioned laptops, a friend collected one of the three for hardware, and at first it was difficult for me to fill it - zero knowledge, then I got involved, but maybe I have everything as they say -Ferry steam
but it works, I probably brought 150 pieces to mind

And as an option - install an easy and non-kill HPishka with the second system in the computer, and duplicate all the garbage on it

[Modern]

I would be quite happy if he became, ksk earlier, right after the store

Buy a new disc, put 10-ku and rejoice further. From experience, once a broken disk will break again.

They have an undeniable advantage - speed!

Better to increase the memory. And those seconds by which the system loading will accelerate are irrelevant in ordinary life.

And compactness.

For the 2.5 "form factor, and this is the size of disks installed in laptops, externally, SDD differs from HDD only in weight, since SSD is much lighter than HDD, and the absence of any visible printed circuit boards.
For a stationary computer, it's not about anything at all.
Compactness can only be relevant if you need to stick at least some disk into a small space.

painfully he is not friendly

A graphical interface, it is also a graphical interface in Africa.
Open the required disk in the window, select a folder or file with the mouse and copy to another disk, it is the same everywhere. And we don't need more.

the second system in the computer to install an easy and non-killable HPishka

Modern the computer may simply not boot from it!

Buy a new disc, put 10-ku and rejoice further. From experience, once a broken disk will break again.

That is, I just broke some kind of disk? Why could it break?
This is me for the future, in order to avoid repetition. :-)

[Crown]

Crown, so remotely, according to your description, it is difficult to say, but it is not at all a fact that the matter is in a disk breakdown. It is possible that the computer itself is in perfect order, and only the operating system (Windows) flew. Then it is possible to fix it at no cost.
Since he asks to insert a disc, it means he wants to restore the system. No CDs were included with your computer? Or don't you have a Windows 10 CD?
If there is another gadget with Internet access and a removable memory card / the ability to use a USB flash drive, then you can download an assembly (program) for Windows recovery from the Internet to the USB flash drive and run it on your laptop.

Even if the disc was attached, I can't find it, where old ones from previous laptops are lying around. Will it not work? We don't have any flash drives or memory cards, we only have a tablet on an android, it's kind of clumsy and wretched, slows down and is not allowed everywhere. :-)



The memory card (new and clean) from the camera lies. Is she not that?

You need a disk with Windows 10
A memory card is needed so that it fits both the tablet and the laptop.
Does the tablet have a removable memory card? And in a laptop, a slot suitable for it?
But if the tablet is slow, then most likely it will not work to download the information for recovery, it usually weighs quite a lot.

[An4utka]

An4utka, everything is clear that everything is hopeless. :-)
Eh, I was hoping for a "magic button" :-), maximum for a combination of buttons. Okay, as a last resort, as the frost subsides, I'll go to the specialists to surrender.

"magic button"

This button is called "Reset", it starts a forced restart of the computer. Apparently not your case ..

combination of buttons

This is a combination of buttons pressed simultaneously, <Ctrl> + <Alt> + <Del>, they also start a forced restart of the computer

What error code does the system write on the blue screen?

What error code does the system write on the blue screen?

I'll get it out tomorrow, load it and copy this string.

"Reset",

Are you ist das? :-)

Are you ist das?

such a ma-a-ah little button, or even a hole under a paper clip, you need to look in the instructions or the network for your brand, or even the laptop model

[OgneLo]

OgneLo, you know how to intrigue! :-)))

intrigue

And there was no thought
At mnu, in stationary, the enta button looks like this

but laptops are not comfortable for me.

Peace be with you bakers!

On the death screen, Windows displays the code of the error that caused it. It can look like a set of numbers and letters (0x0000000F) or a combination of different uppercase words often associated with underscores (SPIN_LOCK_ALREADY_OWNED).
You need to enter the error code in the search engine and see what is covered

And the simplest, as I posted above, is to buy a basket for a disk and stick it into a working computer

And about magic buttons - in the first seconds of turning on the computer, press F1, F2, F8, Delete or another key, look at your device until you see a menu with settings
in the BIOS menu, find an item with a name like Reset to Default, Factory Default, Setup Defaults, or Load Optimized Defaults. This option is usually found in the Exit section.
After a reset, Windows files and settings will remain intact. But, most likely, you will have to go into the BIOS, find the section with the time and date settings and re-configure them.
There is another not difficult option \ who as of course \ needs to spin up the computer, get to the battery and take it out for a few minutes - the BIOS will reset to zero

[Crown]

Crown, and tried to pull out the battery? Suddenly it will help!

[Rita]

Rita, it is monolithic, the battery is visible inside. In any case, it only has screws on its back, there are no opener buttons like other laptops.

Peace be with you bakers!
You need to understand that resetting the BIOS will only help if problems arose after changing the BIOS settings or a failure in the firmware.
And if the disk is covered, then alas

I really do not use saved files, it is easier for me to reinstall the system, as long as there is a set of working firewood for my system, for everything about everything for half an hour
But if anyone gets confused here is a normal gratuitous program - Macrium Reflect 7.2.4523

it is monolithic, the battery is visible inside

This is the wrong battery. It's about a round, coin-cell battery

Peace be with you bakers!

Forgot to mention, do not try to restart the computer an infinite number of times to write down the error code, just shoot the screen on the camera

on his back he only has screws,

And what prevents them from unscrewing? The main thing is to remember their location, if they are different. You can take a picture in advance. In addition, there is still a small battery inside for Bios, it can sit down and then the computer will not work either. We must find it and try to replace it.

This is the wrong battery

And about this one too))

And what, it can help ?! No, I can spin it up and pick it out if I find this piece of iron. :-)

And what, it can help ?!

It helped me a lot in due time!

Peace be with you bakers!

Before tinkering with the computer and resetting the BIOS, which you may have to reconfigure - can you yourself?

I would still look at the error code first, sometimes it is buggy for reasons that are not at all difficult to eliminate, let's say overheating - it will be enough to get rid of the dust, and as an option change the thermal paste

I found in my tips on the 64th bit the error code for hardware 0x00000116, IGDPMD64.SYS, fltmgr, ntoskrnl

That's bullshit - the stop code: CRITICAL PROCESS DIED.



Reconfigure, the stump is clear, I myself cannot. How to clean?

[Galina]

Galina, I'll write to you again.
The blue screen of death does not mean anything at all.There you can often fix it too in 10 minutes.
Actually, the first steps in such cases: this is a system recovery: you tried, but it did not work, something was incorrectly recorded during the update. Therefore:
- check system files and bootloader via the command line.
You haven't written, old or new nook. If you know a new one, the chances of a hardware problem are minimal. Most likely there is a software malfunction.
Noak is cleaned and reset when it is old-old.
Poke, clean, zero. Well, how can you just hit with a heavy hammer?

If you do not have any valuable materials at all and you are ready to get the factory version, then in the 10-ke where you tried to recover, there is a Reset to factory settings item. You can choose it. But the know-how will become really like a store. Everything that you kept for yourself will be erased. Condition, as you gave it in a box.
However, this is like a magic button

Your error is described below. And she is software
🔗
10 is very often buggy, iron often has nothing to do with it. Need a system file checker, good internet connection.
or reset to factory settings.

Peace be with you bakers!

Enter safe mode and in the device manager look at the one marked with a yellow sign, then right-click on it and click update

where you tried to recover, there is a Factory Reset item. You can choose it.

I tried it, it doesn't work.
New laptop, Lenovo.

Peace be with you bakers!

If the laptop is new, then the hardware is certainly unlikely, and the disk is broken?
and did the blue screen appear after the update?

are you sure you've tried this?
exactly it was done, as in the item Reset to factory settings "How to reset Windows 10 if the system does not start or reset from the parameters does not work"
🔗
also for your model there may be a system function, such as here
🔗
Google "Factory Reset your model name"

but think carefully, so as not to lose anything in science. New nook and a dozen on it. 200 percent is a primitive software malfunction. If it did not fall for you, then why should the disk break down there?
There is a chance of marriage, but with a new 10-ke the chances of a software glitch are higher.

[teara]

I don't know anything about the disk, where, which one?
Perhaps even after the update, my son was engaged, I came home, and the screen is blue.



teara, I was executing commands from the screen of this faulty laptop.

Peace be with you bakers!

see firewood as I mentioned above, and then in the same place in a safe run

sfc / scannow

15-20 minutes will twist and at the end you will see a list of problems found in the file system and whether they have been fixed.

Galina.
Look. Reset to factory settings must be done exactly according to the article. Read carefully and figure out where to poke. It is advisable to have another computer with a visual picture nearby.
Factory reset is the simplest, but very radical.
If your system has not been manually reinstalled by someone, then it should definitely work with the right actions.
Try to find a system function for your model.
If you do not figure out where and how to dump, then the rest is difficult for the uninitiated person.
Yes, you need to restore system files from the command line or using the Windows distribution kit, which you do not have and then you also need to look well for one on the internet.

It is advisable to have another computer nearby with a visual picture

you can take a photo of the article on-screen

Peace be with you bakers!

A factory reset is if it does not start at all and does not give errors during testing.
I asked about the update for a reason - the blue screen got crooked.
Make a rollback to the working point and then a couple of movements and heels of minutes

Alternatively, in the Options menu, select Update and Security - Windows Update - Update History - Uninstall Updates

[Anatoly]

no .. in the process, new incomprehensible menus may come out. And it's better to google when you have any questions.
It's easier and calmer with Google at hand.
The new Lenovo should have a section with system settings. But if just from the Windows menu does not work, then you need to look for a system function without options.
Otherwise, restore the Windows itself, look for a faulty driver program.




Anatoly, rollback does not work for her. Reset does not work.
Although Windows should have created a restore point
And the point should be, and the section with the factory system on a new know-how. It is possible that the system recovery actions are not being performed correctly.

Galina, try to restore it exactly on Google. Look for previously created control points.
You can search for a faulty driver through safe mode, but this is more difficult.
I don't think you have anything serious there. But you're just a layman. It all looks difficult from scratch

What does the command line do?

There is no restore point, it is empty.

Although Windows had to create

Windows shouldn't. For it to create a restore point, the corresponding checkbox must be activated.

what does the command line give?

Allows you to enter a command that the computer understands in its computer language

Windows is a collection of files on your hard drive. Or teams. These commands must be written correctly.
The computer began to update, add new commands, overwrite new ones from the Internet.
An error occurred in this process. Somewhere on the disk, incorrect commands were written and now because of this, the computer does not understand what is written there and cannot boot.
Any computer has a place where a copy of the old commands is saved before the update.
It should be. System storage is called.
And in case of failures, the computer must restore the old commands from there. But sometimes it becomes unavailable on the computer automatically, or there also appears a recording failure.
To get to it, you need a command line. Command line - black control input for computer control.
Special commands in the command line can force a computer from the Internet or from external media to overwrite incorrect commands on the disk.

There is no restore point, it is empty.

then either drastic actions: look in Google for a system function to reset the factory settings for your Lenovo. In order to gain access to a closed area with factory commands through special keys - a system from the factory.
Or, let's restore system files on your disk. That is, overwrite the wrong commands.
Study, understand.
🔗
🔗

Peace be with you bakers!

And why it is difficult to check firewood in a safe way, in my opinion anyone can handle it.My computer - properties-task manager - opened and look where the yellow is

And cmd does not have to be called, directly into the search to drive sfc / scannow

but isn't the point created automatically after the update?

[Anatolia]

yes ... I don't mind either. Start with advice Anatolia... The command line won't run anywhere.
Try to boot safely.

Anatoly, but isn't the point created automatically after the update?
does not seem to have been created. Perhaps the default was to prohibit the creation of such points. Although I also believed that the default is always permission.
My bootloader crashed during the update. Such a thing is specific. Even restoring files cannot be fixed, although using special commands it was solved in two minutes.

but isn't the point created automatically after the update?

Nope! Only if you activate this function yourself. By default - not activated.

My computer - properties-task manager - opened and look where the yellow is

How to do this from a non-working computer?

[Crown]

Crown,

🔗

[OgneLo]

OgneLo, thanks, but it won't open for me.

If the system files are seriously damaged, then nothing will open and will not recover. Where does a miracle happen if you have incorrect entries on the disk now? They must be overwritten via the command line when the Internet is on.
Or go back to factory settings, that is, look for a system function for your laptop, your model.To gain entrance to your nook's restricted area. The place where the breeder hid his primary commands. This is some kind of unique key combination for your model, or through the bios - the insides of the nook. This info is usually in the documentation. But you don't have it, watch the internet.
If you want to follow the path of restoring a damaged system now, then I gave you the links above. Scan files.
It would be nice to find a Windows distribution on the Internet and have it at hand. Distribution - Windows commands on disk are correct. So that your computer can copy them to disk from there.
That is, read the articles on restoring Windows on Google. This is what you need now.

With the distribution kit (there is all the correct set of commands) Windows 10 is also the easiest. You start from such a disk, a menu pops up like a dozen now when you turn it on. There you choose recovery and often everything works by itself.





There is another direct way. Sometimes it works. Internet connection must be without a password and not via Wi-Fi. To poke and work the Internet. A dozen likes to solve problems herself, if access to the Internet is free.
Try to give such an easy Internet connection and click on System Restore again.
And even when scanning, the available password-free internet will not hurt. If your Internet is already connected with Windows turned on via a password, then it's worse.

Yes, from time to time it requires you to insert a disc. :-)

Windows 10, distribution, on a well-known tracker, download only msdn version 64 Home single language, no pirated assemblies. If you are in St. Petersburg, come and help, you can go to the service center where I work

I still have such a question:
There are 2 laptops - HP Pavilion dv6700 and Sony Vaio PCG-61611V
For both, the light comes on, the disc starts up, and the screen remains black. Connecting a monitor doesn't help. In the service about dormouse they said that the south bridge was covered, but they don't know for sure at all, maybe the motherboard.
Can one of them be assembled, or are they incompatible?

They are not compatible, try to remove the memory in laptops and install it in place, it often helps

It didn't help, unfortunately.

Peace be with you bakers!
to Alexander

Sasha, I ask you very much as a specialist
Wrote a post - please justify how many 80% did not understand how it is
Well, let's say that a short-term memory deletion will give it is not clear, maybe it will help - but the algorithm
Further
Well, the computer does not start - apart from the death screen, nothing can be understood with some kind of program, but in this case it is necessary to put the system in order, and not easier, as I already wrote - the disk in the basket - the com format and fill the Windows again
If the computer is official, fill in the Windows for 100 rubles and then enter the numbers, and the license, although of course you can immediately install the license just like the rest of the kit
who needs to write in a personal where to get it for a gift, well, or conditionally free