Printer - advice needed

[artisan]

artisan Of course it is possible! Then EPSON with CISS

[artisan]

We have Epson TX410.

artisan Of course it is possible! Then EPSON with CISS

Thank you! Now I'm going to choose a model. A!!! My first Epson died because we didn't print for a while in the summer. But there were refillable cartridges. So I want to ask, if the CISS is still the same, it is imperative to print it? Is this a disease of all inkjet players?

This is a disease of all inkjet workers. There is also the type of Canon PIXMA MG2240 there are 2 cartridges combined with a print head, but if they dry up, buy new cartridges and work on.

This is a disease of all inkjet workers. There is also a type of Canon PIXMA MG2240 there are 2 cartridges combined with a print head, but if they dry up, buy new cartridges and work on.

And you can buy CISS to it? I'm afraid I already have these cartridge refills. And buying new ones every time is expensive

I have a Kenon with CISS, for more than a year, while it has been working. Piksma 280 model. Where I took the printer, they said that CISS should be installed when the cartridge runs out. And the master who put the CISS swore later, says it was necessary to put on new ones. By the way, CISS comes with paints right away.

Dear ones, I’m confused. I need a printer. Mainly to print recipes from the forum, receipts from an online bank, etc. All over, you need a laser. But my husband wants the photo to be printable (it’s not clear, there’s no camera). I looked in the store, for these purposes inkjet machines recommend: nea: Somehow I have not followed printers for 6 years, not in the subject. I would like to hear some advice with specific models - Schaub is cheap and cheerful Yes, MFPs are not necessary, copiers are enough at work.

I have a Samsung laser, I had an inkjet at one time - yes, the photo is printed in color, but you can go broke on cartridges, and if you don't print something for a long time, the nozzles can dry out, and then just change the head in the printer. So I switched to laser, and I don’t know the trouble! A color photo can always be viewed at the link.

Dear ones, I’m confused. I need a printer. Mainly to print recipes from the forum, receipts from an online bank, etc.

If you really only print text files, then take a laser one. Inkjets require more personal care. They constantly need to be printed. Even if there is no such need. I have a laser HP for 6 years, but I only need it for work, well, and recipes from the site. Sometimes I don’t print anything for a month, and then I’ll start printing a lot of things at once. The print quality is excellent. Filled with powder as needed. Before that there was a jet engine, this is an ambush. Sometimes it dried up and not very much at all. The ink might have smeared. But the jet was cheap.

Yes, it is not ice to print on an inkjet color photo, but a color laser one costs so much that it is cheaper to go and print several photos in an atelier.
I have a laser black and white Kenon and a color inkjet Kenon.

I now have a Canon laser black and white - and recipes from the forum, and stuff for work, etc.
Previously, there was an inkjet one - well, it stump, original inks and cartridges are very expensive (printing a photo is not at all cost-effective, and plus photographic paper). Somehow it was absent and no one put it on the seal - the nozzles dried up, a familiar master fiddled with him, and then a chance turned up - sold it.
For myself, I concluded that if there is no objective need for color printing, then I have no desire to fool with an inkjet printer. Since then I have a black and white laser printer.

I am also for laser. I have Canon. Before that there was an inkjet. I'm tired of buying ink .. and they dry up if you don't use it for a long time. in summer. for example. In general. no options - laser.

Thanks everyone. In general, I thought so. It remains to find a budget option.

Thanks everyone. In general, I thought so. It remains to find a budget option.

and if you choose, please share your choice and your opinion on the use!
I am also in thought, but so far only I am thinking from far away! but as soon as an opportunity arises, it will be necessary to take it quickly, otherwise the money will float away to another place! _{we will always find where to attach them (money)!}

Of the budget options HP LaserJet Pro P1102 and Canon i-SENSYS LBP6020, I strongly advise against taking the rest, like Copier and Samsung, or not refueling at all or with conditions (firmware, replacing a chip on a cartridge) or, in addition, a disposable device like the Xerox 3010 (resource 30,000 pages, if improperly refueled will fly into the trash, cannot be repaired)

the rest, like Xerox and Samsung, I strongly advise against taking,

Why? I have Samsung ML1210 for many years, probably 10 years for sure. During this time, I had to change the cartridge, because after so many refills, stripes of ink on the paper were already visible and the roller that stretches the paper was changed. But these are the usual regular replacements for more than 10 years of work, firmware, replacement of chips was never needed. Maybe I was just lucky with my Samsung? Although he plows almost in office mode.

[Melanyushka]

Melanyushka You have an old Samsung, for many years, the policy of companies has changed, alas, greed is only growing

By the way, in our store (at work) there is a Xerox MFP, so it also seems to be dying, but if you carry out resuscitation actions and lives. Masters say that it was released more than 10 years ago, the quality was superb. Now they advise taking Canon instead of current. But I'm talking about MFPs. And I have had Epson 6400 at home for 12 years and it also works fine, but I really want to take it to wash, there is an uninterrupted supply of ink, I began to smear a little.

I have a Canon i-SENSYS LBP2900 for 8 years, if not more, even as the first computer was bought and bought. It prints wonderfully, fast, refills last for a long time, and so far no streaks or smudges.

Of the budget options HP LaserJet Pro P1102 and Canon i-SENSYS LBP6020, I strongly advise against taking the rest, like Copier and Samsung, or not refueling at all or with conditions (firmware, replacing a chip on a cartridge) or, in addition, a disposable device like the Xerox 3010 (resource 30,000 pages, if improperly refueled will fly into the trash, cannot be repaired)

I fully support it. We supply printers to organizations for work. The most popular and problem-free models are the HP P 1102 and Canon LBP6020. Plus, they're not expensive.

By the way, in our store (at work) there is a Xerox MFP, so it also seems to be dying, but if you carry out resuscitation actions and lives. Masters say that it was released more than 10 years ago, the quality was superb. Now they advise taking Canon instead of current. But I'm talking about MFPs.

For operation only KYOCERA (Kyocera) 🔗
Canon produces normal entry-level devices only. A3 format equipment for a long time has not been produced by himself, he orders by ODM in Chinese firms, tears

For operation only KYOCERA (Kyocera) 🔗
Canon produces only normal entry-level devices. A3 format equipment for a long time has not been produced by himself, he orders by ODM in Chinese firms, tears

Thank you. But we don't need A-3 format. For invoices we need and so sometimes copy something no more than A-4 format.

For operation only KYOCERA (Kyocera)

Yeah, I have that at work. Thanks for the advice about the printer, I hoped that you would come and advise specific models.

[Bridge]

Bridge I indicated above, from the budget options HP LaserJet Pro P1102 and Canon i-SENSYS LBP6020
Easily refilled, remanufactured, cartridges have cheap Chinese compatibility. Yes, that's just one nuance that HP has, and this applies so far to CE285A cartridges (it goes for HP LaserJet Pro P1102), these cartridges can be refilled normally 1 time, then only restoration. There was a problem after changing on in the production technology of these cartridges.Or buy "China", if not strangely stronger and longer holds refueling.

[nvk]

nvk What is the load on paper? If up to 3000 per month then HP if higher then FS-1025MFP but he has a small toner tube for 3000 pages, FS-1035MFP / DP at this tube for 7200 pages, the cost of a print without depreciation is ~ 0.50 rubles per A4 sheet 🔗 all these devices have a drum life of 100,000 pages

[nvk]

nvk What is the load on paper? If up to 3000 per month then HP if higher then FS-1025MFP but he has a small toner tube for 3000 pages, FS-1035MFP / DP at this tube for 7200 pages, the cost of a print without depreciation is ~ 0.50 rubles per A4 sheet 🔗 all these devices have a drum life of 100,000 pages

What 3000 pages are there, God forbid 200 - 300 per month!
And then where to shove that bandura, then you look at Kenon and think where to put it. Room 18 sq.
And the money limit. And this FS-1025MFP costs UAH 2259. It hurts, it won't pay off 100%!

[nvk]

nvk Then HP LaserJet Pro M1132 is enough 🔗! tab = features

[nvk]

nvk Then HP LaserJet Pro M1132 is enough 🔗! tab = features

Thank you! But boom if you take, then Kenon.

[nvk]

nvk This is 90% the same manufacturer HP and Canon

[Bridge]

Bridge I indicated above,

Yes, thanks, I get it. I just read and understood WHAT I wrote. I meant that when I initially asked my question, it was from you that I expected to receive a specific recommendation. "Here comes the master, the master will judge us"
Yes, and it was precisely the further service that interested me - refueling, restoration. In general, I'll go to the store today.

We also had a question about purchasing a printer. After reading and asking around, we came to the conclusion to take. Canon i-SENSYS LBP6020. There will be an action in Komfi on September 20-23, let's see what happens there. Now it costs 999 UAH.
Expensive

Olya, but she will work for a long time and without unnecessary headaches. I took mine around 700 hryvnias, and they don't sell this model, but it works great, I haven't even changed the cartridge yet, I just refueled it.

Julia, thanks. We decided to take it, found it for 845 UAH.

and in specialized computer stores did not look?

So they found there

[sazalexter]

Hello everybody!
I read and was about to order the Canon i-SENSYS LBP6020 printer today, and then my son suddenly declares that he would like to have color printing (I'm not very sure that we need it), you can advise, tell me which one you can pay attention to , and would like not very expensive. or are they too problematic and expensive? maybe then you shouldn't bother ?!
I realized that I needed a printer and needed to buy it in the near future (while there is an opportunity) and I am waiting for advice, because I don’t understand this issue!
hope sazalexter , you give me advice too!

My husband bought a Canon PİXMA MX360 a month ago. TVM has color printing, scanner, photocopy. At first I began to be indignant about why we need all this, but very quickly changed my mind. Now we are happy to print photographs that were previously in virtual form: on a computer, on a flash drive, on disks. It is much more pleasant to look at a photo on paper than to look for it somewhere in the depths of a computer and see it only on a monitor. And he has already justified its price, we have already printed so many things for school, work and home that, using the services of a photo studio, we would give more money than for a printer.

[Erhan]

Erhan, Thank you! looked, the Internet writes that such a model in Moscow can no longer be found.
while someone else responds, I read about similar models.
I want to buy in the coming days a printer the device is already on fire.

[valushka-s]

valushka-s What is the son going to print, how often and how much? If there is a photo and there are no increased requirements for print quality then 4-color PIXMA MG3540, if large volumes of print and increased requirements then PIXMA MG5340 and refillable cartridges Bursten Nano 2 for Canon PIXMA iP4840 🔗 b and ink kit.
If you don't need a photo, only color documents, then HP color laser, but that's a separate conversation

[CANON PIXMA MP280]

while someone else responds, I read about similar models.
I want to buy in the coming days a printer the device is already on fire.

I have a 3x1 printer - a copier, a printer, a copier, a scanner, printing text from a computer (I insert A4 paper) and a photo (special paper)
I insert a black-and-white and color cartridge - printing at will, depending on what and in what color you need to print. Photo prints, only need special. paper for that.
Satisfied with the scanner, you need to buy specials.program FineReader, but you can always text from a book, for example, upload to the computer screen.
Model CANON PIXMA MP280 small and compact, stands on a small bench under the desk, does not interfere, ready to go at any time. Easy to operate.







Details and characteristics here 🔗

This is my second printer, also 3 in 1, completely satisfied

[sazalexter]

sazalexter, Admin, thanks for the help!
I'm going to study.

[valushka-s]

valushka-s CANON PIXMA MP280 is a good device, but it has long been out of production, it is already difficult to find it on sale, to replace it with Canon PIXMA MG3540, as mentioned above

I have a Canon PIXMA MG5140 + CISS (continuous ink supply system)
Like this:

There is a scanner and a copier and photo printing and two-sided printing, everything is, in short.
We are friends with him and we quarrel ... The seal is very good, but sometimes it is capricious because of the CISS (if necessary, I can tell you in more detail what it is and what it is eaten with)

[valushka-s]

valushka-s CANON PIXMA MP280 is a good device, but it has long been out of production, it is already difficult to find it on sale, to replace it with Canon PIXMA MG3540, as mentioned above

ABOUT! We'll know, I just bought a year ago, you won't get away

[valushka-s]

valushka-s CANON PIXMA MP280 is a good device, but it has long been out of production, it is already difficult to find it on sale, to replace it with Canon PIXMA MG3540, as mentioned above

Well, you must. True, I bought it a couple of years ago. And the other day I bought new ink tanks for the MP280 - I bought it without any problems

Please tell me, you need a printer with Wi-Fi, what model to put your eyes on, you need to have everything - a scanner, a copier, a printer, and good photos

Please tell me, you need a printer with Wi-Fi, what model to put your eyes on, you need to have everything - a scanner, a copier, a printer, and good photos

Canon is a very worthy manufacturer, look in its models for everything that you have listed.

[tatita]

tatita With wi-wai, look for Canon MG5340 and cartridges for it, more details in the topic above.

[tatita]

tatita With wi-wai, look for Canon MG5340 and cartridges for it, more details in the topic above.

Canon with wi-wai, it's good: yes: and here's another question, if my tablet only asks for a Samsung printer, and what should I do now? Will they be compatible?

[tatita]

tatita Samsung tablet? Well, then it is understandable .. only this company has not been making normal printers for years10, and I have never taken photos of printers. In fact, you have to try, write a tablet model, I will look for support.

[tatita]

tatita Samsung tablet? Well, then it is understandable .. only this company has not been making normal printers for years10, and I have never taken photos of printers. In fact, you have to try, write a tablet model, I will look for support.

Sazalexter, tablet samsung galaxy laptop. There is also an almost old printer, epson tx 210, it worked mainly for documents, now it is moving to the nursery, so a good printer is needed. : Yes: I also read about the Samsung, which is not really that much, I think I might not get hung up on wai-wai, although it seems that soon all the equipment will be with him.