Lagri
If you took a bucket at the Moulinex service center, then they should not have been mistaken by the identification number of the x / stove (I bought myself a bucket for x / p Moulinex 502430, the number on the plate at the back or below), and if they made a mistake, they can correct the situation , changing to the desired one. And if you bought somewhere yourself, then you probably have to either somehow file these ears (if this corrects the situation and if only the case is in the ears, and not in the bucket itself), or try to change the bucket where you bought it. Is the bucket itself included in the x / stove?
verazato
Bought at a service center. The buckets are exactly the same, except for the ears. The bucket itself climbs remarkably, but it doesn't "snap into place", the ears are too big, they don't let
Lagri
So let them change. You can, of course, adjust by sawing, but this is at your discretion. I'd rather change (better new, you paid money for it, and then there's additional work - filing)). Only probably will have to go with a x / stove to prove it.
verazato
Thanks for the advice. I'm definitely not lucky to change it - it was a bucket that was transported for a month and a half. They certainly do not even have another to order. Dad brought a file, he will sharpen it today. Let's see what happens.
Lagri
Sawing at home yourself will probably be difficult. See construction above do not damage. Maybe it's even better to have it done in a service center. I think it will be safer to wait. Let them be in the service and adjust. Yeah ... I recognize Moulinex !!! Itself with them has suffered. GOOD LUCK TO YOU!
verazato
The ears were filed. It turned out to be not so simple - the shaft is not centered. I had to file the ears unevenly. Now the bucket must be inserted strictly one side forward.
Where can you buy a normal bucket ?!
Lagri
Does the bucket even work? Of course, on good terms, I had to go with a bread maker and a bucket to the Service Center and let them correct their own shortcomings. And I didn’t understand something about the shaft ... Was it just not in the center? So you got a defective bucket?
verazato
It turns out that it is defective. The shaft was immediately off-center. We haven't tried it yet, so I don't know if it will work or not.
Lagri
Yes ... it also happens ... I, too, when I bought a new bucket for 2 thousand in the Service Center, I warned them that if it didn’t fit, then I would come back, for sure. But they said that it shouldn't be so, that they did not have such cases that the buckets did not fit, because when placing an order, they write off all the information about the x / stove and there they accurately select a bucket. The bucket came in very tightly, I put it in with difficulty, but now it has been developed (I insert and remove it back and forth) and is normally inserted and removed. And your bucket is also in the region of 2 thousand, probably worth it?
verazato
The native bucket was also at first difficult to insert and remove. And this was not inserted at all. It costs 1200
Lagri
Well, if you carefully sawed it off and you don't see any traces, can you return it to the Service Center and show them that the bucket is not inserted? Sympathize with you. That's how people are fooled. The devils will sell that, they will rip off the money and suffer with their goods.
masiy
I will sell a bucket with stirrers, a stand for a baguette holder and the inserts for baking baguettes and ciabatta from Moulinex OW 5004 are a little used. (the motor burned out at the bread machine)
yulyasha_gl
Quote: Morozik

I will sell used, but in good condition from Moulinex 6002, a bucket with stirrers, baking sheets for baguettes and flat baking trays with a stand. Moscow. How much they cost, I don't know - offer your price.
I am interested in buying them, unless of course they have already been sold. Were they heavily used? Are there any scratches? My e-mail:
yulyasha_gl
Dear ones! Good day to you! I was impatient to buy a stand for baguettes and buns along with baking sheets, I have a Panasonic oven. I want buns and a baguette. And the gas oven doesn't brown my buns! Tearfully ask, if anyone has, and needlessly, sell!
And maybe someone will tell you in which service center you can order, but my bakery is not Mulinex, will the service one answer my desires?
Lagri
Quote: yulyasha_gl

Dear ones! Good day to you! I was impatient to buy a stand for baguettes and buns along with baking sheets, I have a Panasonic oven. I want buns and a baguette. And the gas oven doesn't brown my buns! Tearfully ask, if anyone has, and needlessly, sell!
And maybe someone will tell you in which service center you can order, but my bakery is not Mulinex, will the service one answer my desires?
yulyasha, here write about the mold for baguettes. If you have not purchased it yet, then there is an address there and it is not expensive, read it.
Pekar
Hello everyone!
A question for Muscovites. In Moscow, can you buy a bucket for 5004 somewhere without pre-ordering? In Sovinservice only by order
shade
Peace be with you bakers!
take a look

🔗
Lagri
I have a question: about 7 months ago I bought a new bucket for the Moulinex 502430 bread maker through the service center, now something started to leak inside the bucket near the shaft, in general, the dough stains gray. Is there a guarantee for the bucket I bought? Has anyone come across this? When I bought it, the service center told me that there was no guarantee. But what if? The receipts were preserved, but only from the service center. I tried to ask the officer. website, but something didn't work out.
Pekar
shade Thank you very much
Pekar
Quote: Lagri

I have a question: about 7 months ago I bought a new bucket for the Moulinex 502430 bread maker through the service center, now something started to leak inside the bucket near the shaft, in general, the dough stains gray. Has anyone come across this?

Yes, it was exactly the same. This has broken the tightness between the oil seal and the axle. Now there is a grease from the oil seal. I think everyone came across this, who then had to buy oil seals or the whole bucket.
Lagri
Is this - beyond repair? I will no longer buy a bucket, definitely, since with rare use it (new) already breaks down. I thought when selling a bucket Moulinex gives some guarantees ...
And where do they get the oil seals, or again to stomp to the service center?
Pekar
Quote: Lagri

And where do they get the oil seals, or again to stomp to the service center?

For example here: 🔗
vepasnil
Tell me, no one else has "
Antoshka
Quote: Lagri

And where do they get the oil seals, or again to stomp to the service center?
In Ukraine, here you can buy an oil seal for a bread machine without any problems:
🔗
philia
Can you please tell me where in Moscow you can buy a stand and molds for baguettes and flat ones? and what time will it get up?
Nita
Good afternoon, bakers! My Moulinex bread maker with a baguette holder, alas, cannot be repaired, so I will sell a baguette stand, stirrers, a bucket with a scratch, but maybe someone needs a second, for example. for jam, maybe someone needs a lid from the bread maker, etc. I used it for only 3 months for a year, now I got a new one, and this is still idle. I live in St. Petersburg, please contact.
InessaInessa
How big is the scratch and how much is your bucket worth?
Nita
500 rubles, not a small scratch, the stirrer jumped out during the kneading ...
TatianaSa
I will buy a stand for a baguette holder and molds. I really want
shade
Peace be with you bakers!

🔗Pan SR-TMB18 for Panasonic Multicooker - 3700 r

🔗Multicooker Panasonic SR-TMH18LTW --- 2 591 r.
svetlanaDA
Good day to all! One kneader on Moulinex was lost - can anyone have a spare one?
Sashka1980
Good day!
I will buy a broken drive (SS-186166) for a Moulinex OW6002 baker, subject to the integrity of the silumin frame.
Spare parts and service of Mulinex bread makers
Kiev. 098 153 18 19 Alexander.
Anna2605
Hello dear bakers!

A terrible thing happened - the bucket of the Mulinex OW200036 bread machine broke, that is, how it broke - the pin on which the stirrer was put on began to fall out.It seems to have been repaired, it does not fall out, but the bucket flows. We tried to buy a new one, like this 🔗, but, alas, it does not fit her - it refuses to be inserted. (((((
Maybe someone has an unnecessary bucket from a bread machine in which something else is broken? Ready to accept as a gift or purchase in St. Petersburg. The stove is, of course, more than 3 years old, but it's still a pity because of such nonsense.
Alexey12
Can anyone tell me what kind of oil seal is needed for the OW1101 bowl?
Sashka1980
Anna2605, try changing the order of placing the ingredients in the bowl - flour first, and liquid on top. In this case, an obvious leak can be avoided and thereby protect the drive of the bucket of the bread machine from breakage.

All recipes

© Mcooker: best recipes.

map of site

We advise you to read:

Selection and operation of bread makers