Lemira
Help, I don't know what to do ... a terrible thing happened - the stirrer to the stove 5002 was lost.

Where can I get it now? Well, at the same time in St. Petersburg it would not hurt ...

Respond, who came across ....

HELP !!!!
Andrew4351
I don’t know about the mixer, but I lost my hook two days ago, so I made something like a hook out of a thick, thick wire (as thick as the hook itself), so it pulls out much better !!!
exi
Unfortunately I don’t know about Peter. But on my 1001 I ordered a kneading knife and a measuring cup knife in Moscow at the Sovinservice service center somewhere about 250 rubles ...
shade
Peace be with you bakers!
Anjelochka
Just half an hour ago I called the Moulinex hotline about buying spare stirrers and bowls. I'm a plushkin and I like to stock up just in case, and then suddenly, when the teflon peels off, there will be no spare parts to buy? Although I only have a stove for four days yet ... The hotline answered that all this can be purchased at ANY service center, either immediately or on order, the phone numbers of the service centers are in the warranty card, call!
Crochet
Anjelochka ,
For this reason, just like you-Plyushkin, I ordered myself another bucket for HP (let it be). Everything would be fine, but wait so long ... I made an order back in December last year ... When I confirmed the order, they said that sometimes it takes up to 4 months to wait ... So, as they say: "Prepare the sleigh in summer .. . ", that is, make an order in advance ...
vorscan
Lost a dough mixer from OW5004. In our Ivanovo service department, they will not bring anything. Can you tell me where in Moscow you can buy quickly?
vi_kon
Quote: vorscan

Lost a dough mixer from OW5004. In our Ivanovo service department, they will not bring anything. Can you tell me where in Moscow you can buy quickly?

Here: "Inservice", Kazakova, 8A, building 3
(499) 267-23-22, (499) 267-26-10 - sales center for accessories and consumables

And it seems that they even have mixers available:
🔗
777sheh
If someone needs this information: from the service centers listed in the warranty card (St. Petersburg), under the order, they are taken to write out spare parts in 3: two "Pioneers" and Party Service Baltic. Delivery is promised in a period of three weeks to 2 months maximum. How I get it (if I get it) - I'll write. Prepayment somewhere within 50%.
Tatunya
Quote: shade

Tanyusha
I don’t know what to do, I lost the mixer from the bread machine. Sank into the abyss. Suspicions that she was accidentally thrown away. I don’t know what to do. Can someone tell me what? !!!
Panevg1943
Quote: Tanyusha

I don’t know what to do, I lost the mixer from the bread machine. Sank into the abyss.
Tanyusha
I have moulinex OW 2000. Only I live in St. Petersburg.
Panevg1943
Quote: Tanyusha

I have moulinex OW 2000. Only I live in St. Petersburg.
Tanyusha, for sure, St. Petersburg also has services of the SEB group (SEB). Search a search engine. Good luck!
shade
Peace be with you bakers!
just called agitators 200
and bucket 1100 everything is in stock, they really said that not very much
sazalexter
Quote: Tanyusha

I have moulinex OW 2000. Only I live in St. Petersburg.
See here 🔗
"Remservice"
Anchor, 2
227-71-26
ASC

"Remservice"
Peat road, 7
441-23-00
ASC

Party-Service Baltic
Varshavskaya, 51 building 1
374-21-16, 374-21-17
ASC

Pioneer Service
Novolitovskaya, 5
295-84-14
ASC

Pioneer Service
Ligovsky prospect, 52
324-75-33
ASC

AC Pioneer
B. Sampsonievsky prospect, 62
320-09-30, 320-02-27
ASC
sazalexter
Quote: Tanyusha

Do you know where you can buy a mixer with delivery?
In St. Petersburg, I think it’s unlikely 200r scapula, transport 150-200r
there is no
🔗 and 🔗
shade
Peace be with you bakers!


I confirm the authenticity today I took a bucket there for 1100r
asked about the mixers, they said that there are still several sets for 400r and then they will only be in a couple of months since they just ordered, but they don't know anything about the price of the new delivery
sazalexter
Quote: shade

Peace be with you bakers!


asked about the mixers, they said that there are still several sets for 400r and then they will only be in a couple of months since they just ordered, but they don't know anything about the price of the new delivery
The question was about Peter !!!!
shade
Peace be with you bakers!
yes I answered Tanyusha yes something closed
but all because that is not written in the profile

Tanyusha tell where you are from and what kind of stove there would be no such linings
or come to Moscow stirrers while you have
and by the way
Remservice "
Anchor, 2
227-71-26
ASC
and I live in Moscow on anchor street
aleneva
Quote: Tanyusha

I don’t know what to do, I lost the mixer from the bread machine. Sank into the abyss. Suspicions that she was accidentally thrown away. I don’t know what to do. Can someone tell me what? !!!

A similar situation with the same HP. But recently, where I bought a mixer, I was told that they simply do not complete. ((So, neither you, nor we have lost it ... and there are sooooo many of us (who have not found and lost) !!!
Tanyusha
I didn't have it, only after the next preparation of bread, it disappeared. Look ..
Penguin
Here is something similar to what you need. 🔗... Unfortunately, I don't understand German.
Champagne
I called the service center in Tyumen - they say, not yet, you can order, ordering one mixer costs 500 rubles. ... I said I would call.
shovalov
I bought a Moulinex OW 5002 bread maker, a good oven, but I would like to purchase a stand with 4 baguettes as in a Moulinex OW5004 XXL Baguette bread maker. Does anyone know where you can get a stand with 4 baguettes on the Internet?
shovalov
Yes, the question is serious, there may not be an answer .......
sazalexter
Select your city, find SC, components and spare parts can be bought only through them 🔗
julifera
Duc in 5002 one ten, will he pull such a baguette holder? In 5004, there are still two shadows ...
Buy buy, give a lot of money, but the result is unknown.

A friend bought 5004 from me - she once dabbled in baguettes and now says - she doesn't want to mess with them, so many body movements that it's easier to make these baguettes in the oven ...
nastik
wait a minute .. what is "ten" ??
himichka
Nastik, ten is a heating element. Honestly, I baked baguettes once during the year of owning mules. I've been baking in the oven for a long time.
nastik
a! now it is clear why it can not pull
I also had an idea to buy this additional baguette holder, but all hands do not reach .. most likely I will buy it anyway if I can. and then I'll see if it pulls or not) I just don't have any ovens, so that's it ..
alexgas
If anyone is interested, I post what I found for spare parts

🔗

🔗

🔗

the latter bought a bowl and a stirrer. When I was looking for myself, I saw St. Petersburg offers much cheaper than Moscow ones.

When searching, I recommend finding out the part number, for example, for the OW3000 bowl it is SS-185950 and make a request to yandex by number
drWatson
Has anyone repaired this Moulinex series? I do not mean a bucket (with it, too, a standard problem with oil seals). I suspect that the motor or motor control circuit is dying (or has already died). Mine started having problems a month ago. Before that, I spent a year and a half without any problems. Used every day. Then they began to wedge the shafts in the bucket. So far I have not changed anything, I just worked out the shafts manually before laying. Then I noticed that the rotation of the drive just stupidly stops during the program, as if the load protection was triggered. Dismantled completely, greased the shafts on which the plastic gears sit with heat-resistant automotive grease. Allowed for a week, but then again the same picture. At the first five-minute kneading (first program), when the dough becomes thick, it began to stall again. When you take out the form and turn the shaft with your hand, it picks up and starts twisting again, I insert the form on the go. So it worked for a week. Yesterday I refused to turn at all, on attempts to manually turn on the program turned on, sometimes I tried to turn on the motor, but then it stalled again. In the off state, the shafts turn normally, that is, obviously there is grease there and nothing wedges. I concluded that there was something with the engine itself (maybe the brushes were already worn out there, for example), or with the control circuit. There is no time to disassemble, I work all week. Maybe someone came across this?
lullec
I have such a problem, I read somewhere I need to replace the bucket .... The question is where to order a bucket ???
drWatson
Quote: lullec

I have such a problem, I read somewhere I need to replace the bucket .... The question is where to order a bucket ???
We have an authorized Mulinex service center - Leninsky Ave.-4a (tel. 345-69-90) and Ilyich Ave. 103 (345-67-20). Today I'm going to go there, it turned out that the machine is still under warranty (2 Years). At the same time, I find out about the presence of buckets. Two weeks ago I called there about a bucket, they said that within a month they should appear, approximately - 300 UAH. But I decided not to buy until the issue with the motor was resolved.
drWatson
I am reporting. I handed over the stove for repair under warranty - replacement of the motor and baking container. The motors are in stock, there are no containers, they are expected until the end of April. So, if the problem is with the capacity, they can change it under warranty. Yes, the ASC on Leninsky has changed its address, they are now in building 26 - this is on the same side, opposite the church near the OCKB.
SUPER KHANIN
IF ANYONE has a MOULINEX OW 3000 Bread Maker, PLEASE MEASURE SHAFT DIAMETER AND VANE DIAMETER (THE PART THAT FITS INTO THE SHAFT). AND IF POSSIBLE PICTURE
Bakshi


This is now the only address where you can buy spare parts without waiting for them for several months. The knife, in particular, costs 300 rubles.

Hope it comes in handy
borisovna
After two years of work, my Muli's bucket broke, my husband repaired it, but did something wrong, the bucket began to jump out, I could not find a new one. I bought another C / P. And then we went to Krasnodar in the M-video for a sale, and there is a bunch of C / Ps with defects at discounted prices, and among them is my twin Muli for only 800r. dismantled without a shovel, a glass and a spoon. But a brand new bucket !!! Lucky? I think yes.
Irishada
Dear members of the forum, it so happened that I had a certain amount of spare parts for Moulinex bread machines in my hands. A bucket costs 1,300, 2 mixers - 500 rubles. I am in Khimki, there is an opportunity to cross in Moscow. Phone 8-916-606-27-15, Irina.
Alladin
Good day everyone! Lost stirrer for bread maker Moulinex OW5004. In the internet I dug up some information about the service center in Maryino. Ordered there with delivery. Agitators were available. t 495-348-65-30 m Maryino Novocherkassky Boulevard d47 🔗
Frost
I will sell used, but in good condition from Moulinex 6002, a bucket with stirrers, baking sheets for baguettes and flat baking trays with a stand. Moscow. How much they cost, I don't know - offer your price.
iri_09
I will sell for spare parts Moulinex OW5024 Home Bread Baguette, served for almost a year, and the other day it did not turn on, instead of kneading I heard a steady hum.
I don’t know what happened to the stove, so when I bought (eldarado) I didn’t wait for the warranty right away, and then I didn’t get to the store. Shelter for spare parts, we will agree on the price.
Yanvarskaya
I have a Moulinex OWB 5004 XXL Baguette Bread Maker. I wonder if the bowls from your bread makers will fit mine? After 4.5 years of use, a rod flew, which holds one of the stirrers.
Gallka
Yanvarskaya, it is not fatal at all. In mine, a couple of months ago, too, one could not stand it. The neighbor is a turner, in exchange for a little white bottle he made a new one. Only while my husband was picking out the remnants of the rod from the bucket, he swore heavily
Maybe your turner has quieted down somewhere in the neighborhood
Yanvarskaya
The rod is intact, I meant that it flew out, got out of the grooves, fell out and does not hold.
sazalexter
Quote: Yanvarskaya

The rod is intact, I meant that it flew out, got out of the grooves, fell out and does not hold.
Buying a new bucket in the service is not a problem
Yanvarskaya
I read it here, people wait months for their spare parts. I found the only service in my city, called, said that only to order, one of these days I will go, I will find out
maribraun
I have a mulka 5004.
after 4 years of good work, a bucket flew. the red silicone gaskets on the stirrer pins began to crumble. Naturally, there is nothing to replace at home, so for a long time I wiped off the black plaque on the pins after kneading the dough. (I remove the mixers immediately after the second mixing and bake bread without mixers). wax today ordered a new bucket! I went to the service center, told them the HP model, paid 1400 rubles. within a month they promise ... as soon as possible ...
verazato
Hello! I really need advice. I bought a new bucket for Mulinex OW200032, but it doesn't fit into the bread maker. Interfere with the "ears" that fix the bucket in the stove.I measured the old bucket with a ruler and the new one - the new one is 4 mm longer because of the "ears". Has anyone faced this problem? What can be done? We tried to bend it up - it doesn't help.

All recipes

© Mcooker: best recipes.

map of site

We advise you to read:

Selection and operation of bread makers