Kitfort KT-1356 blender with coffee grinder

[Kitfort KT-1356 complete set]

Blender "2 in 1" Kitfort KT-1356

Kitfort KT-1356-1, black



Kitfort KT-1356-2, red



Kitfort KT-1356-3, white



Blender Kitfort KT-1356 combines the functions of two devices. This is a stationary blender and coffee grinder.

The blender is equipped with a capacious plastic bowl with a measuring scale; there is a hole in the lid of the bowl that can be closed with a cap for adding ingredients directly during operation. The refill port cap can be used as a measuring cup. The engine compartment is made of plastic.

The blender has two speeds and a pulse mode that can be used to break ice. You can set the desired speed with the mode selection knob.

For safety reasons, the blender can only be operated with the bowl installed. Rubber feet provide a firm hold on the blender on the table.

To grind coffee beans, a bowl and a coffee grinder blade unit are supplied, which are installed on the engine compartment.

The blender motor is equipped with overload protection: it will automatically shut off when overheated.

The blender is designed for mashing, whipping, chopping, mixing various products, as well as for breaking ice. Ideal for mixing fruit and fitness drinks, making smoothies, protein blends, milkshakes, mashed soups, sauces and baby food.

Specifications Kitfort KT-1356

1. Voltage: 220-240 V, 50 Hz

2. Power: 600W

3. Class of protection against electric shock: II

4. Number of speeds: 2

5. Working volume of blender bowl: 1.25 l

6. Working volume of coffee grinder bowl: 200 ml

7. Appliance size: 230 x 203 x 385 mm

8. Packing size: 206 x 206 x 402 mm

9. Net weight: 1.7kg

10.Gross weight: 2.1KG

Kitfort KT-1356 complete set
1. Engine compartment - 1 pc.
2. Blender bowl - 1 pc.
3. Blender bowl lid - 1 pc.
4. Cap - 1 pc.
5. Block of blades for the bowl - 1 pc.
6. Coffee grinder bowl - 1 pc.
7. Block of blades for a coffee grinder - 1 pc.
8. Operation manual - 1 pc.
9. Warranty card - 1 pc.

Kitfort KT-1356 device

Modes:

P - pulse mode
O - off
1 - low speed
2 - high speed

In pulse mode, the blender operates as long as you hold down the knob. When released, it will automatically return to the "O" (off) position.

The rotation speed of the knives in pulse mode corresponds to the high speed.

Description Kitfort KT-1356

Before first use or after long-term storage, wash and dry all components except the engine compartment. Wipe the engine compartment with a damp and then dry cloth.

Tips and Limitations

Attention!

Always close the bowl with the lid before turning on the blender.

Continuous operation time is no more than 2 minutes in blender mode and no more than 30 seconds in coffee grinder mode. After this time has elapsed and before turning it back on, let the blender cool down for at least 3 minutes to avoid overheating the motor.

If the motor overheats, the blender will automatically turn off. In this case, turn the mode selector knob to the “O” position - off, unplug the blender from the power supply and wait 15 minutes for the motor to cool down. Then try turning the blender on again.

General Tips

Many ingredients will cook better if the pulse mode is switched on periodically during low or high speed operation.

When using pulse mode, do not exceed the maximum continuous running time of 2 minutes. After this interval has elapsed, allow the motor to cool down.

After turning off the blender, always wait until the knife has come to a complete stop.Always turn off the blender before removing the bowl or grinder.

Do not put ingredients in the bowl or grinder that could damage the blender: bones, large chunks of hard foods, foods that are too hard, etc.

When chopping hard ingredients, use pulse mode first to prevent the knife from getting stuck.

Use pulse mode if the food pieces are too large and do not mix well in the bowl.

Do not run your blender with an empty bowl or grinder empty.

Do not use metal objects to avoid scratching the bowl.

Do not store food in the bowl. Wash the bowl immediately after use.



Blender bowl

It is better to add some liquid to facilitate mixing and grinding of ingredients. The liquid allows the ingredients to mix better in the bowl. For example, to grind vegetables, you need to add water to them so that it at least covers them. A blender is not suitable for dry chopping vegetables, in this case use a chopper.

If the recipe requires ingredients to be mixed with liquid, it is recommended to add it to the bowl along with the liquid, this will improve the grinding process.

Cut large ingredients into pieces no larger than 1.5 x 1.5 x 1.5 cm.

Use the pulse mode to break ice. Place ice cubes in a bowl. Turn on the pulse mode for 1-2 seconds and turn it off, take a break for 0.5-1 second. Continue the process until you reach the desired size reduction.

Hold the bowl with your hand while breaking ice. Do not use more than 6-8 cubes of standard 3 x 3 x 3 cm ice cubes. Do not use large pieces of ice as this could damage the blender.

To chop the meat, cut it into pieces no larger than 1.5 x 1.5 x 1.5 cm. Do not put more than 200 g of meat in the bowl.

For more efficient chopping of thick mixtures, fill the bowl with the mixture to the maximum division.

While the blender is running, you can add ingredients through the hole in the lid by pulling out the cap.

Don't overfill the bowl. There should be free space in the bowl. Do not add ingredients beyond the maximum graduation on the graduated scale. If ingredients generate a lot of foam during mixing, reduce the amount of ingredients.

Do not pour liquid over 80 ° C into the bowl. Otherwise, the bowl may crack.

If there are hot ingredients in the bowl, it is recommended for safety to support the bowl with your hand during operation: place a towel or oven mitt on the bowl lid, then hold the top of the bowl through the towel.

It is not recommended to mix ingredients less than 0.2L in a blender bowl.

Use a measuring cap to dispense ingredients. Its volume is 50 ml.

Examples of using the various modes are given in the recipes.

Coffee grinder

The grinder's blade unit is specially shaped for grinding and grinding hard ingredients such as coffee beans, peppercorns, etc.

The degree of grinding is determined by its duration: the longer, the finer. For a more even grind, it is recommended to put a small amount of beans in the grinder. To obtain grinds of different grain sizes, work in a pulse mode.

Ground coffee loses its aroma very quickly, therefore it is recommended to brew it immediately after grinding. Grind just as much coffee as required for brewing. If you still want to grind the coffee in stock, then store it in a tightly closed container.

Do not fill the grinder bowl more than the maximum level. The maximum amount of coffee is 50 g.

Recipes

• Fruit cocktail

Peel 2 bananas and cut into pieces. Peel and core a medium-sized apple and cut into quarters. Put all the ingredients in a bowl, add 2 heaped tablespoons of frozen berries and the juice of 1 lemon.

Turn the blender on low, remove the cap from the bowl lid, and while cooking, slowly pour 0.5L of cold low-fat milk into the bowl through the hole in the lid. Turn off the blender after 2 minutes. The cocktail is ready.It is recommended to serve it immediately after preparation.

• Mashed potatoes

Put in a bowl 400 g of boiled peeled potatoes, cut into pieces, add 20 g of vegetable oil and pour in the milk to taste. The milk will make it easier to chop the potatoes. Turn the blender on high and cook for 30-40 seconds.

• Ground (baked bread for breading

Put 1-2 crackers, broken into small pieces, into a bowl. Grind at high speed for about a minute.

• Reconstituted milk

Pour 250 ml of water into a bowl and add 10 g of milk powder. Turn on low speed and stir for 20 seconds.

• Chopped carrots

Cut 500 g of carrots into 2 cm pieces, put in a bowl and pour 750 ml of water. Grind at high speed for 1-1.5 minutes. Then strain the water through a sieve.

Maintenance, care and storage

Be sure to unplug the blender before servicing.

Clean the bowl, grinder and blade unit immediately after use. Do not allow food debris inside the bowl to dry.

To remove food debris from the bowl, pour some water and detergent into it, place the bowl on the engine compartment and turn the blender on high for a few seconds. Then rinse the bowl with water. You can also clean the grinder.

Blender bowls and grinders, lid, cap, blade units can be washed in the dishwasher up to 60 ° C.

Do not use aggressive detergents and abrasive materials for washing. Wipe the blades dry after washing.

Wipe the engine compartment with a damp and then dry cloth. Do not immerse the engine compartment in water or other liquids. If water gets into the engine compartment, dry thoroughly before starting.

Store your blender in a cool, dry place out of the reach of children.