Kenwood kitchen machine: working with attachments

Can I take 2 identical nozzles? And it's cool with a 40 percent discount ... But it doesn't matter, plus shipping if one buys ...

40% for all four or on the fourth?

For all

And nobody answered me. Which grater should I choose high or low speed?

[Irina]

Which grater should I choose high or low speed?

Irina, they are different, depending on what is required from the nozzle, that must be chosen.
I don't have a low speed one, and I didn't want it. I read in the reviews that it works slowly, you have to press. Tinder is mainly cheese and chocolate, or something in small quantities.
There was even a review that this attachment works much better on a separate Kenwood meat grinder, and not on a combine!
A high-speed rubs quickly and you can handle a lot of products, for example, now that the workpieces have gone.

You look for a search in the topic, it became convenient to use it!

They took it. The white bowl fit perfectly. But now you can buy cheaper at our Profservice. If only because of the bowl - I wouldn't buy an ice cream maker.

Sorry, but you could not give a link to this store, nor can I find anything. If the link is impossible, then you can write in a personal.

[Irina]

Irina, low-speed on the side socket, rotates slowly, a complete analogue of shredders on meat grinders.
The food processor is designed for daily use and small portions.
Slicer grater for a large family or for workpieces.
The last two are for the high-speed jack.
In my opinion, the latter are both more stable and more versatile.

[Valentine73]

Valentine73, here is the link to the page with accessories for K.M. Kenwood
🔗

Thank you so much

The low speed grater is good for chocolate and cheese - won't heat / melt.
Although I rub carrots for salad, if I need a little. And right into the salad bowl. Easy to clean / rinse.

The low speed grater is good for chocolate and cheese - won't heat / melt.
Although I rub carrots for salad, if I need a little. And right into the salad bowl. Easy to clean / rinse.

It rubs well in the rest at minimum speed.

It rubs well in the rest at minimum speed.

That is, to the question "Tell me what to buy?" each of us will answer differently.
For example, some are delighted with the multi-shredder, but I consider it a complete misunderstanding.
And so on many points - each has its own favorites.

Thank you very much for your answers !!!!! It immediately became clear that the low-speed one, to the purchase of which I was inclined to, I did not need.

[Irlarsen]

Irlarsen, shredder speed, high-speed beast in the harvesting season. The low-speed one for my meat grinder is several times slower. There are more high-speed drives. On the low-speed one you can use cheese, chocolate, on the high-speed one you can't

that low-speed, which I was inclined to buy and I do not need.

You see how ,,, and I have it in my favorites

some are delighted with the multi-shredder, but I consider it a complete misunderstanding

so for me it is useless, and many in the subject are very happy, it’s a pity to sell it - I really wanted to buy, maybe I’m doing something wrong

so for me it is useless, and many in the subject are very happy, it’s a pity to sell it - I really wanted to buy, maybe I’m doing something wrong

You need to get used to it, in old topics (in the year 2014-2015) I showed what and how I was doing. The basic rule: grinds either dry or completely wet.
Ideal for sauces, poppy seed filling, sugar, coffee, spices (I have 2 of them, one for odorous things, and the other for current work).
After the operation, she made mashed potatoes for my mother. Who has small children, in general, a super-piece!

[Anita]

Anita, I have 2 of them too !! The sauce, as where I did not do it, did not work .. only in the glass it turned out perfect - fast, cool !!

The low-speed one for my meat grinder is several times slower.

Slower, but if the blanks are not on an industrial scale, then it's still okay.
The location of km decided the matter for me: it is impossible to substitute anything, uh ... from the stern of the combine, and it's hard for me to turn it around. And ahead is normal. Probably, the types of shredder are different, in theory, the high-speed one should rub / shred everything more evenly. In general, for large quantities I take out a low-speed one, but for everyday work I have enough food processor: it is at hand.

it is impossible to substitute anything, uh ... from the stern of the combine, and it's hard for me to turn it.

I am in the process of buying a harvester, so there are so many questions. Now I am deciding on a place and nozzles. As for the location, can you ask a question? How much free space "from the stern" must be in order to use the food processor and be able to fold the combine itself? That is, how much space should there be from the wall?

[Anita]

I am in the process of buying a combine harvester, so there are so many questions. Now I am deciding on the place and attachments. As for the location, can you ask a question? How much free space "from the stern" must be in order to use the food processor and be able to fold the combine itself? That is, how much space should there be from the wall?

You don't need much from the wall, but upward and on the sides you need 30-40 centimeters for free access. This is if you put it facing you.

Anita, I have 2 of them too !! The sauce, as where I did not do it, did not work .. only in the glass it turned out perfect - fast, cool !!

Well and then

This is if you put it facing you.

Wow! And it didn’t even occur to me that I could put it face to face. I considered only the option sideways, as in the pictures. Is it convenient to use, for example, a food processor? My problem is that I cannot find this harvester live in our stores and try on how the attachments will take up space.

[Irina]

Irina, endures until friday ?? I'll post a photo if I don't find it on my phone now ...



,

[zvezda]

zvezda, No, Kesha does not climb where I dreamed of putting him. Generally does not climb anywhere. How to cram something unpushable? We'll have to give up both multicooker on the table.

How much free space "from the stern" must be in order to use the food processor and be able to fold the combine itself? That is, how much space should there be from the wall?

I have kvc7100s, that is, small. The folded top adds 11-12 cm to the length. It never entered the head with the high-speed attachment. I can’t face myself: but a meat grinder? And a dough sheeter, cube cutter, spiralizer? And, as usual, the cabinet on top - attachments like a food processor and a blender won't fit.
But when I bought it, I measured everything "live". Bosch and big Kenwood fell away under my conditions.
That is, it stands across on a 40-centimeter kitchen cabinet, closer to the edge, so that the top nozzles fit in. On the right is a plate that pretends to be a table when necessary, and on the left there is nothing, a break. Nowhere else.
By the way, it is still inconvenient to use a blender: with my height it is tall and heavy. But beast, I forgive for this.

.

Found it alive !!!!!!! Yeah, big! Face to yourself in any way, it immediately became clear. Where I planned it in any way, where I planned instead of cartoons, too! He gets up there, but backwards to me, otherwise it's just some kind of garbage, it's inconvenient to use. I think ..... there is still a place and an outlet there, but you have to go around the bar and drag all the ingredients for the dishes there. In general, I will probably put it there. Walking is useful !!!!!

[Lero]

I read the Kenwood handbook, and as a result, I ordered a new hook from the previous combine, a fluffy whisk and a mixer from the previous version of the cache, too.

Lero, Lena, please tell me the articles)

[KatrinaKaterina]

KatrinaKaterina, Kate! Elena is still silent, probably busy.
1) Mixing attachment to the kitchen machine
Article: KW713836
2) Kitchen machine whisk attachment
Article: KW716840
3) Hook mixer for dough to the kitchen machine
Article: KW711659
Shop Profservice, section Kenwood kitchen machines.



By the way! If someone has not found 992 sieves yet, then in the M Video stores there is 1 piece-display case in Kaluga.
And today they should put 2 more pieces on the site. in Astrakhan, yesterday they were still in armor, both in different stores, one like a showcase sample, the other presumably. So look for acquaintances in these cities.
I think it doesn't matter for the sieves that they are display cases.
On the M-Video reference phone, you can book them for 5-6 days in advance

[Masha Ivanova]

Masha Ivanova, Elena, thank you! I want to clarify the hook and whisk better from the old model or am I confusing something?

I want to clarify the hook and whisk better from the old model or am I confusing something?

The hook is better and the whisk is the same. We additionally order the so-called. "fluffy", it has more twigs, it makes light mixtures like cream more fluffy. But this is not necessary (I haven’t tried the whisk so much so far ...)

Stirring attachment for kitchen machine

How is this nozzle different?

In Europe, new cars 9060S are cheaper than the previous ones, those that are KM096, etc. Only KM082 found at the sale. Is the old model better than the new one? I heard about the hook, I watched the comparison video, for me I don't see any minuses with the new one, plus the new one has built-in programs. Why is the price of the old model not something that does not fall, but more?

[KatrinaKaterina]

KatrinaKaterina, Kate! Read this part of the topic from about pages 190 to 195, there is a lot written about whisks and hooks. I haven’t looked for this stirrer-squiggle yet, how I’ll find it and hang it on you. It's just better for you to read everything about hooks and whisks, then a lot becomes clear. This link is on page 190, where in the middle of the page Sheri starts talking about corollas. from there and read.
https://Mcooker-enn.tomathouse.com/in...com_smf&topic=121798.3780



Girls! And explain to me. the meaning of this action. Why have several topics with the same name. Here are the topics titled: CM KENWOOD. We work with two or even more attachments. I remember that recently Twig, I think, wrote about this.
Moreover, all these topics are valid. Today I accidentally ran into this. Like I read something in a topic with that name. And here again the topic with the same name. So what to read? So where to write?

[Irlarsen]

Irlarsen, Ira, so that it was convenient to move the big Kesha on the table, on the advice of the girls (somewhere in the subject) put a thin stand under the hot plate under it. This one is made of thin plastic, the cheapest one)). I cut out the configuration according to Kesha from it and now it slides on my table, like on skates)). With a slight movement of my hand, I move it from under the cabinet to an open space - it will work and again into place under the cabinet. So you don't have to think about where and how to put it!

[Prus - 2]

Prus - 2Doesn't it vibrate on this stand? And what is this plastic hot plate? I have all sorts, but the size of a saucepan or frying pan. Kesha is clearly larger. Or is it an ordinary rectangular one on which the plates are placed and the cutlery is placed?

[Lyubashenka]

the usual rectangular on which the plates are put and the cutlery is put?

Well yes, Lyubashenka do you mind that I got in ??

[zvezda]

zvezda, Cool idea! Thank you!

[Olenka,]

Olenka, certainly not against))! You are absolutely right - just an ordinary rectangular thin one! And it's very convenient with her! I don't remember who first submitted this idea, but there was a discussion in one of our topics. And many use this option. My great thanks for this idea! It is very easy for Kesha to carry on this mat-stand!

Girls.I don’t remember, maybe I already wrote where, but I pasted felt furniture stickers on my Kesha’s legs (I cut it out roughly in shape so that they wouldn’t stick out) and roll it on the tabletop without any problems either ... Maybe someone will come in handy

pasted felt furniture stickers on the legs of her Kesha

Cool idea!!

[belena74]

belena74, Lenochka, Well, thank you! What does collective intelligence mean! I love our forum! I will definitely replace my rug with felt stickers - that's how I didn't get it? All the furniture with stickers! And we carry heavy armchairs-sofas, thanks to these stickers, with one left))!

[belena74]

pasted felt furniture stickers on the legs of her Kesha

belena74, Elena, where can I buy them?

where can i buy them?

Yes, in any household. store ...

For all

Girls, good evening. Do you choose attachments? This is a discount if you buy on the Kenwood site, right? I just need an ice cream maker ...

Girls, I bought a set of nozzles max 980 dough sheeter, for spaghetti and wide noodles, I began to look at them, the nozzle for sheeted dough is very similar to the Marcato Atlas 150 dough sheeter that I had. On all nozzles, the month, the year of production and Made in Itali are extruded on the metal. On the rolling Marcato, which I had, Made in Italy was also squeezed out in the same style. Maybe they are made at the same factory, if so, then the Kenwood nozzles should be of excellent quality, since Marcato Atlas excellent rolling the dough around the edges does not get stuck. Somewhere in the subject I read that the dough was stuck in the old AT rolling machine with a built-in roller. How is it with the new rolling, I don’t know yet? If she is like Atlas, she will not cover anything.

And for these nozzles, you can buy -DELÍCIA-Dough-Feeder from Teskoma. It will turn out like an old dough roller with a roller, only the roller from Teskoma can be installed in any convenient position and on any pasta attachment.

[KatrinaKaterina]

KatrinaKaterina, congratulations on your purchase !! Thanks for the helpful tip for everyone !! I think that they will delight you for a long time!

[KatrinaKaterina]

KatrinaKaterina, I'm afraid to be mistaken, but Miranda wrote that some Kenwood nozzles are made by third-party firms, so the dough rollers are exactly Italy, and the mill seems to be someone messerschmit. I beg your pardon if I confused the names

some Kenwood attachments are made by third parties

I think it's for the best.
I came across a very useful video on the Kenwood auger juicer, although it is a freestanding one, but I think that the tips will come in handy for the nozzle

.