once
Kettle Kitfort KT-637


Electric kettle Kitfort KT-637 is designed for boiling water at home, in offices and in summer cottages. The kettle's power allows it to be used in houses with poor wiring. A filter is built into the spout of the kettle.

The body of the kettle is made of stainless steel, while the lid and base are made of a combination of plastic and stainless steel. The measuring scale is located on the housing under the handle. The large neck of the kettle makes it easy to get inside when cleaning and descaling. The handle of the kettle is plastic, does not heat up and fits comfortably in the hand.

The lid open button is located on the top of the handle, and the power button is on the bottom. When the kettle is turned on, the operation indicator comes on.

The heating element (TEN) of this kettle model is hidden and is located in the bottom part. From above it is closed with a special metal plate made of stainless steel, due to which direct contact of the heating element with water is excluded. This design prevents the formation of limescale, facilitates maintenance and significantly reduces noise when heating water.

The stand with center contact allows the kettle to be placed on it in any position, providing 360 ° rotation. There is a cord storage area at the bottom, in which you can reel in excess power cord so that it does not get in the way on the table. The legs of the stand are non-slip.

The kettle turns off automatically when it boils, has protection against overheating and turning on without water.

Kitfort KT-637. Stainless steel kettle

Technical characteristics of the kettle Kitfort KT-637

Voltage: 220-240 V, 50 Hz
Power: 1850-2200 W
Capacity: 1.7L
Unit size: 140 x 235 x 230mm
Package size: 225 x 167 x 248mm
Net weight: 1.05kg
Gross weight: 1.29kg

Equipment:
Kettle - 1 piece
Stand - 1 piece
Operation manual - 1 piece
Warranty card - 1 piece

Kitfort KT-637. Stainless steel kettle

Kettle device Kitfort KT-637

Kitfort KT-637. Stainless steel kettle

Description of the kettle Kitfort KT-637

Preparation for work and use

Before using the kettle, rinse the inside with water, then fill it, boil water and drain.

1. Place the stand on a flat surface. Plug in the power cord. It is recommended to store excess cord in the compartment on the underside of the stand. Insert the cord into the slot in the stand.

2. Pour water into the kettle up to the level between the “MIN” and “MAX” marks, close the lid tightly, place it on the stand and press the on / off button. The indicator light comes on and the kettle starts to heat up.

3. When the water boils, the kettle will automatically turn off and the indicator light will turn off.

4. If necessary, you can turn off the kettle by pressing the on / off button.

Kitfort KT-637. Stainless steel kettle

Care and storage

To extend the life of your kettle, descale as it builds up. Place the descaling agent in the kettle (you can use 250 ml of 9% acetic acid solution, or 3 g of citric acid dissolved in 100 ml of water), pour water up to the MAX mark and boil. Wait for the solution to cool and drain. Then rinse the kettle with running water, boil water in it and drain it.

Use a damp cloth to wipe down the body of the kettle and the bases regularly. Unplug the cradle from the power supply before servicing.

Store the kettle in a cool and dry place out of the reach of children.

Kitfort KT-637. Stainless steel kettle

Troubleshooting

Water drops on a stand.

Probably, the water level exceeded the maximum, as a result, when boiling, part of the water splashed out.

All recipes

© Mcooker: best recipes.

map of site

We advise you to read:

Selection and operation of bread makers