Giraffe
The problem with the typewriter. Samsung WF80F ЗагрузкаU4W digitalinverter, ecobble 8kg.
When washing, approximately in the middle of the washing phase, it starts to slip. Tries to spin the drum, twitches, tries to twitch in the other direction and fails. If you pause, after a while, when before, when later it starts up again and turns. It can wash for a long time until the next twitching, or it can skid in a minute or two.
Or it can twitch, twitch and she will start to wash further.
Also, the time to change your mind is required in different ways, when it is enough to stop and start, and when 10-15 minutes to give "to think"
Also slipped several times during spinning. I changed the programs.
A few more times it also happened that, at the washing stage, it bloats, begins to drain the water, does not completely drain, does not wring out, draws in water and continues to wash.
The husband opened the back wall, removed the belt, it is normal there, in his opinion. There are no backlashes, it does not spin tightly. In moments of jerking, the impression is that the engine lacks power.
And before that, in two months, the 3-year warranty ended.
Yarik
Giraffe, Tatyana, we had similar symptoms, the ariston machine, it turned out to be the case in the relay, which is responsible for the rotation of the drum.
Giraffe
Yaroslavna, repaired yourself or in service? She doesn't fit into our trunk. And to call the master ... We are like that with the dishwasher ... (They called me to the house, looked, listened to my complaints about her, took the money for the call and told me to take them to the service. We came to the conclusion that she likes to ride and, from time to time, when she starts to fail, her husband knocks on her side, touches something there and use it further.)
Yarik
Giraffe, Tatyana, our friends gave us the master's phone number, he called the electrician and gave the reason, and immediately changed the relay. And before that, too, the "master" came, also called and said that the motor needs to be changed, 6000r, the relay with replacement cost 1500
Giraffe
Yeah, with this version it's clear.
Giraffe
I phoned the private traders, outlining the problem. She dismissed the first one, who said that it was 100% engine, others said that there can be a lot of things to watch. I settled on the one who said that there may be several reasons, but 99% is not in the engine. I'm waiting, they said they would come in 2 hours.
Yarik
Quote: Giraffe
that there may be several reasons, but 99% is not in the engine.

Giraffe, Tatyana, I'm waiting for the verdict with you)))
Giraffe
Private traders came. We saw that the engine had a 10-year warranty and was told to contact the service. But I mentioned this when applying. And the Host said 99.9% is not an engine. That is, they just took the money for the call. True, then he himself called the support service, immediately to Moscow, outlined the problem and asked if it was possible, if the service began to refuse to repair it for free, call them back again so that they could influence. I don’t know whether we already have this experience, or ... In general, today we arrived from the service center and took the car. Waiting ...
Yarik
Giraffe, Tatyana, oh, these masters. Well, let's hope they fix your car. Now, in general, there is no situation with repairs, no one wants to fix anything, everything is only for replacement, when our master came to tell us that their service is exactly the same, but there are those who like to fix it, figure out what's the matter. He said that if they want to repair LCD TVs, then no one will even watch, but he and a colleague are doing it, but in private, and breakdowns there are quite simple.
Giraffe
They were taken to a service center. They said that they were driving in different modes - it erases, so they have nothing to check.Now, if an error were displayed then ... I explained to them in Russian that no errors were displayed during glitches.
They began to tell me about low voltage - we have a new power line, this is normal.
About the malfunction of the outlet, she explained how many more devices I have connected to this outlet.
So she doesn't pull, the power drops - But I don't turn everything on at the same time.
This means the voltage on the line - Yeah, at any time of the day and at the same time, most often from the start of washing.
I tried to give them an example of an appointment with a doctor. If they complain of heart and blood pressure, and at the time of admission everything is normal, this does not mean that I will not do diagnostics and think over preliminary diagnoses. DO NOT feel. They said it was easier with people. And I, somehow, always thought the opposite.
I had to call the support line in Moscow. She outlined everything and what the service told me. They also tried to reduce it to voltage, but ... At the time of the conversation, the machine was buggy, and the voltage was 240. Then, that probably turns on the heating and is not enough. Aha, and before that, 30-40 minutes, she just wets the laundry. But I checked in the next wash, by the time of the glitch, the water is already well hot through the glass.
They also suggested an outlet, checked through another, the same thing.
Turned on through a voltage regulator, the same thing.
They gave me the phone number of another authorized service center. And I did not know that they were engaged in washing machines. I saw only photos, videos, TV with them ... Their premises are not suitable for large-sized equipment.
In general, I arrived today, a master from them. And the machine is NOT buggy. But we have already shot so many videos before. From the video, he suggested it was a module. It seems like they had one machine with this problem. In general, the repair is supposed to be done at random.
That is, the module is changing, but it may not be it. I’m thinking. The machine reaches, it will be necessary to throw him a photo of the plate INSIDE the machine with a detailed classification of the model, make a request to the manufacturer how much it will cost and then decide. But the preliminary amount was not encouraging. A third - a quarter of a new car, depending on the model.
Alex100
Tatyana, specialists in one word
On the old car, when the control unit began to glitch when washing without laundry, there were also no problems
Yes, in Central Russia, the situation with repairmen is not the best.
Bearings, supports can still change, but where you need to turn on the head, that's the trouble
Giraffe
I also drove off at idle, it was buggy.
The husband came home from work and offered to buy a new one. And then you change the block, then something else will come out. But ... well, it's not worth five cents ... I'm waiting for a message about the cost of the module and I will think.
Exocat
Tatiana, can you check the engine brushes? Maybe they were stupidly erased? But not completely, and when more tension is required, the remnants of worn out brushes do not provide it?

I do not know how to change them there in Samsung, but in Siemens my husband replaced them himself.
Giraffe
But at first the washing goes on as usual, and then the gimp begins. And after a pause it goes again. And today a cycle has passed without any yak.
Exocat
Quote: Giraffe

But at first the washing goes on as usual, and then the gimp begins. And after a pause it goes again. And today a cycle has passed without any yak.
Then the control unit is really buggy, there is only its replacement.
sazalexter
Tatyana, Pull out the control unit and stupidly solder, looking in a good light for the presence of "skirts"
Palych
Giraffe, and there is no way to upload a video to YouTube? See brushes and all pins, connectors.
Quote: Giraffe
we have already filmed so many videos
Giraffe
sazalexter, the husband doubts he can. He solders to solder, but he says that he did not climb into such a jungle. How to solder ...
Exocat
Quote: Palych
Exocat, and there is no way to upload a video to YouTube? See brushes and all pins, connectors.
Not filmed. It was half a year ago.
Giraffe
The issue with my typewriter was resolved by replacing the electronic unit. All the "pleasure" cost half the original cost of the machine.But it seems that the programs themselves work somewhat differently. But here I can not show anything.

All recipes

© Mcooker: Best Recipes.

map of site

We advise you to read:

Selection and operation of bread makers