Choosing a small grating combine

where kids are important.

so big babies all love it. Should the berries be defrosted first?
the soup may be good too, but the soup blender is completely spoiled

[OgneLo]

OgneLo, thanks for the description of the photo 🌝, everything is accurate.

big babies

baby, any age - someone's baby and nothing is alien to them

Do you need to defrost the berries first?

No, the berries are frozen: either berries from the freezer, or semi-frozen milk. The first option is easier. Pour in no more than 1/5 of a bowl (the whipped mixture will greatly increase in volume). Reference: 1 (one) layer of frozen strawberries almost pour milk. Accordingly, the thinner the starting ingredients, the thinner the cocktail. The higher the percentage of frozen liquid in the feedstock, the thicker it is.
The Soviet store "milkshake" was prepared, as far as I remember visually, and it was prepared "without leaving the counter", including from the following 3 (three) ingredients: 100 g of milk ice cream, 1 liter of semi-frozen milk 3.2% and steam - three measuring spoons of syrup (this is for 2 store shakers), then beat the mixture well.

blender soup cook completely spoiled

mnu does not have such a device (and I have ninada). It is more convenient for me to puree in portions with "foot", if desired / necessary, by adjusting the portion density by the ratio of thick and liquid in a particular portion.

I don’t have such a device (and I’m ninada

It only seems, not yet

[Marina]

It only seems, not yet

PPKS!
I also thought for a long time that in the presence of a "leg", a soup cooker is completely unnecessary. But deeply mistaken!




Marina, Thank you! I'll make a cocktail in Fillet!

not yet

I have already considered them - do not nat!
here is a mini-oven - I want it very much, but really there is nowhere to put
my main work (for every day)
micra (incl. for cooking), HR7605, dishwasher ...
and only then, a quick car and everything else
And, since the purchase of the multi-cutter, I do not use the Boshevsky shredder at all.

I want it very much, but really there is nowhere to put

on mikru! I also have no place, that's where I want to install.

including for cooking)

and what do you cook in the micr?

[OgneLo]

OgneLo, Marina, thanks for the detailed answer. Philips HR7605 / 10 is also equipped with all possible nozzles, including a free nozzle. I just would like a composite pusher. Does the multi-cutter HR1388 multi-cutter not fit the HR7605 / 10?

on mikru!

mnu has a micra on the refrigerator and above - it's just not convenient, especially for the oven.

what do you cook in micra?

everything that "cook", "stew quickly" (that is, does not take time to cook), "bake quickly" (or cook "steamed", but without boiling) ... but there is nothing new here.

I would like a composite pusher

this does not exist for the HR7605. But it's not a problem. It is always possible to cut a narrow product "cylinder" in half and send it to the neck simultaneously.

Does the multi-cutter HR1388 multi-cutter not fit the HR7605 / 10?

no, they have a different shape in section. HR1388 is oval.

[Katerok87]

Katerok87, I am answering the questions:






Mirabel, a microwave oven is not an option, there are holes for air circulation at the top, and small ovens get very hot by themselves, it is dangerous.

microwave oven is not an option

what do you ... don't you think it's worth the risk?
in one of our members of the forum, this is exactly how everything was arranged, it was Lerel from Germany, it seemed to be quite convenient ..
Another has an oven to this day on a plastic shelf
and I thought that maybe there will be nothing wrong if you make such a pyramid

at the top of the air circulation hole

You mean the oven, right? well so everything will be in free circulation
but in general, I myself slow down with the purchase of an oven precisely because of the lack of space for it

[Mirabel]

Mirabel, no, about the microwave.

in one of our members of the forum, this is exactly how everything was arranged, it was Lerel from Germany, it seemed to be quite convenient ..

and another member of the forum, just changed one micra to another and by experience was convinced that

In vain I was worried about the marriage of the door - I had the thought that maybe I forgot to peel off some film.In short, I could hardly endure until the evening, now I conducted an experiment at home - I pulled the micra on the table (though I did not forget to remove any film) and 10 minutes boiled water in it in a plate. The result is that everything is fine, there was almost no steam even inside the chamber. It turns out that this micra has the main holes for steam outlet not from the side, but from the back. My old one did not have one, so she worked quietly at this place, and she was smaller. In general, the new thing on my rack is a little cramped. Well, I'll keep in mind that for heating it will be fine anyway, and if you cook something, you will have to rearrange it. Still, the manufacturer will not advise anything bad in the instructions (such as a distance of 10 cm behind and 15 cm from above, and even 5 cm from the sides)

About the fact that the oven has no place next to the refrigerator, I hope, it's obvious ...
I have a micra - at the level of the face.

that the oven has no place next to the refrigerator, I hope it's obvious ...

and what does the refrigerator have to do with it? or just a piece of advice?

no, about the microwave

aaa well then I have everything the norm! my micra has holes for circulation in the back and is very well "ventilated", as it stands on a pedestal, and on top of it I think to put the oven on.
It is a little annoying that the general view will suffer, especially since I have a kitchen with a salon.

what does the refrigerator have to do with it?

explanation, within the framework of the "oven for micra" option offered to me, that this is not an option ... all the more, in our apartment the temperature does not fall below 28-30 ° C anyway ...

It's a little annoying that the general view will suffer, especially since I have a kitchen with a salon

yes, not everything here, the optimal solutions in the kitchen are realizable ... At work, we put the micra in a closed bedside table, however, we had to drill holes with a diameter of approx. 5 cm (using a special "wood crown" attachment for a drill) in the back wall, to lead out the electric cord with a plug and ventilation + during cooking, keep the nightstand door open

[lala2]

and what is the diameter of the wider part of the Moulinex grater?
8 cm, and the nozzle is 7.5 in wide and 5 cm in narrow.

This means that in Sigmund the wide part is 10 cm in the narrow 4 cm.



lala2, As I understood from you, both Sigmund and the Zelmer meat grinder with grater attachments. When do you use graters there and there?

Means in Sigmund the wide part is 10 cm

I doubt that 10 is on the outer edge of the plastic ring, and the bell itself is most likely 8.5-9, but it is clearly longer in length, the multifunctional nozzles are only 7 cm.

[Katerok87]

[/ quoteKaterok87, I use a meat grinder when it is necessary to process vegetables with buckets, with large-scale preparations, it turns out very quickly on it. Everyday Sigmund is at hand, it is smaller, and all the attachments and graters are in it, and the graters are adequate. The topic is about small electric graters, which are used every day, for everyday life I choose Sigmund.




I will add, here are the most common graters, there is a difference in cutting

I use a meat grinder when it is necessary to process vegetables with buckets, with large-scale preparations, it turns out very quickly on it. Everyday Sigmund is at hand, it is smaller, and all the attachments and graters are in it, and the graters are adequate.

I will add, here are the most common graters, there is a difference in cutting

Thank you!

I doubt that 10 is along the outer edge of the plastic ring, and the bell itself is most likely 8.5-9

Well, the bell should be a little smaller.

I climbed online stores, but the choice is not great, small multi-cutters have disappeared.

[Vika]

annoying that the general will kind of suffer

Vika, make something like a shelf (on legs or with the letter P) - under the micra shelf, and on the shelf there is an oven. You can think of how to combine with kitchen furniture

Here are 2 videos to compare Moulinex and Russell Hobs

Something Russell is rubbing a carrot a little. Probably because the grater area is less than that of Mulinex.

Girls! especially Larisa-Doblet! often overseas.
This is the thing that interests

This is the thing that interests

Some antiques, look at flea markets

Some antiques, look at flea markets

Yes, 1989 video, American Ibey and Amazon give absolute zero on demand

at flea markets look

do not visit such places, but showed up at a virtual flea market. I thought, maybe someone has and can tell a little about him

In galmart LEBEN mini-food processor with 3 attachments-899 rubles.

🔗

[Mirabel]

MirabelTupperware has a similar thing. But the price, of course, is kapets.

[Svetlana]

Svetlana, and you have not tried it in practice?
yes, we have it hanging in sales, of course, no one needs it! maybe she is very beautiful

Vika, no, I haven't tried it. And I don't know anyone personally who has tried it. If it cost even 1.5-2 thousand, I would have bought it, but it’s not ready.
I have a meat grinder and citrus press from this series. The meat grinder is quite a working piece, but the price is inadequate, I think, even taking into account all the discounts, joint ventures and so on - very expensive.
I cut everything with a burner. Already 20 years old))

[Svetlana]

Svetlana, Well, okay!

[Cirre]

Cirre,
Do you use this and for how long? If so, share your impressions. well the pros / cons, pliz.

Tupperware has a similar thing. But the price, of course, is kapets.

I have such a thing from a tapper, a Fusion series, it cuts well. But the price ...., I agree, is high.

[Galina]

Galina, Yes??!! class! Can you give this charm a name? I want to look for a video, 'yes buy soon

Vika, yes this is she - Fusion Master with 4 nozzles from Tupperware.

The full name is Tupperware Fusion Master. In the profile topic, the girls will tell you in detail about this device.

[Cirre]

Cirre,
Do you use this and for how long? If so, share your impressions. well the pros / cons, pliz.

Tanya, I bought before summer, now often at work, then carrots, then onions. For this price range, a normal harvester. While of the minuses, dyed from carrots

Girls, can anyone have tried CASO CR3X multi-cutting? I didn't read 19 sheets of Temko, maybe they discussed ... I also want to get a little helper

CASO CR3X multi-cutter

According to the instructions, it has a limit on the maximum time of continuous operation - no more than 5 minutes at a time. After that, you need to give the grater time to cool down.
Source [https://Mcooker-enn.tomathouse.com/s-image/1275/home/caso-cr3x.shtml]

I want to buy a little helper

I have such

https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&topic=526858.0
I am very satisfied) There are many attachments, cuts directly into the bowl, the speed is space, suitable for daily use and for workpieces and washes in seconds.

[Katerok87]

Katerok87, on, precisely, he does not pull a little helper, he is not so small)))

[Katerok87]

Katerok87, well, the bullet is definitely not a mini-compact and budget tiny little thing)))

Vika, no, I haven't tried it. And I don't know anyone personally who has tried it. If it cost even 1.5-2 thousand, I would have bought it, but it’s not ready.
I have a meat grinder and citrus press from this series. The meat grinder is quite a working piece, but the price is inadequate, I think, even taking into account all the discounts, joint ventures and so on - very expensive.
I cut everything with a burner. Already 20 years old))

About Tupperware Fusion Master. Now I personally know someone who has tried it. It's me ))
In short, the thing is cool. Rubs lightning fast, almost effortlessly, quite quietly and without wires. I was rubbing a bunch of carrots and I wasn't even tired. The price, of course ... not for the poor, even considering that I got it with a very good discount. I rub the carrots on it now, not on the berner, everything flies from the berner in all directions, despite the tray, the berner is more dangerous and wash it for a couple of seconds longer.

Namely, he does not pull a little helper, he is not that small)))

Well, yes, not very small, I would say that it is average, but still, many do not remove it from the table)

budgetary

A small Kenwood was discussed here, which also rubs into the bowl, it is of course small, but someone lacked additional attachments for it. And it costs not much less than Bullet)))

The topic is called "... a small grating combine", but not a budget one, and in my opinion it is not large, but an average one)))

The topic is called "... a small grating combine", but not a budget one, and in my opinion it is not large, but an average one)))

Yes, everything is correct, I agree, but for one or two carrots, I don't use it, it takes longer to wash it than it works

[Katerok87]

Katerok87, I ran on the topic, but did not find about the cubes, does this wonderful apparatus have them?

I ran on the topic, but did not find about the cubes, does this wonderful apparatus have them?

This apparatus has no cubes. There are different types of grapes, slicers, spirals of different thicknesses.

Katerok87, I ran on the topic, but did not find about the cubes, this wonderful device has them

There, at the beginning of the Temka there is a link to all the available attachments, but yes, as Galya already wrote cubes, unfortunately there are no.

but for one or two carrots, I don't use it, wash it longer than it works

I want to try to freeze carrots for future use, rolling them into tubes in bags, and then ready to take out and cut off as needed.

There, at the beginning of the Temka there is a link to all the available attachments, but yes, as Galya already wrote cubes, unfortunately there are no.

Clearly understandable, then I withdraw the adjective "wonderful".

Miranda gave an overview of the small Kenwood FDM 100 BA food processor.
Miranda, please write your impressions of him over time.
Can you make mayonnaise in it?