Kenwood Kitchen Machines

I meant rather weak, that is, the power is less ... how will it cope with a steep test?

For dumplings, I did not knead in it. And it copes well with the rest of the test. I make dumplings dough in a food processor with knives.

Yes, but then why if I lower the speed from max to 3, then at 3 speeds the car works absolutely smoothly? If it was a resonance, then it would always be, right?

Not true. Resonance occurs at only one point. Near the beat resonance point.

Added Wednesday 31 Aug 2016 10:37 PM

How do you like the 570, is it rather weak?

great car.
But Sens will be more comfortable.

Comrades, tell me plz, does your silicone flexi nozzle evenly sweep from the sides of the bowl from all sides? I have it on the right side (the one that is closer to the combine itself) rubbing tightly along the wall, and does not touch the opposite wall. If you lower it lower - on the one hand it rubs and creaks, on the other - it barely touches

[Air]

Air, everything is ok with me, like from all sides.

But my harvester is not worth it --- to me, but like this | (perpendicular to me and the wall) and it turns out that I do not see the side that is farther from the combine and closer to me, I will have to look. But according to the result, I did not notice that something was wrong.

Are both rubber attachments so?

At the expense of creaks - flexi always creaks cold (after heating or immediately). This is friction. I lubricate the edge of the nozzle, which touches the bowl, with very little butter, very microscopically, and then it does not creak at all.

UPD here is the video of the presentation, and there flexi creaks
link from that minute-second where about it for 5min.18sec.

Girls, here's my word, you find yourself on this forum, as if in round-the-clock technical support.
Thank you for your responsiveness !!!

Miranda, thank you personally.
Both nozzles are the same, I tried to insert the nozzle in a different way, turned the bowl 180 degrees - nothing changes.
The fact that she creaks is not scary. But the fact that, on the one hand, rubs me badly, confuses me much more.

[Air]

Air, somewhere in the subject it was that someone had a misalignment, the service was corrected. But there it seemed to be with other attachments, I don’t remember which one. But don't start worrying right away, maybe you still need to lower it, and what squeaks is normal.

I’ll spin mine on an empty bowl during the day, I’ll say.
Well, someone else will unsubscribe.

Where did you buy the car? 86 was more profitable than 96 at the office. website with a discount?

[Miranda]

Miranda, just finished making toffee. When I started to wash the bowl, it turned out that on one side of the bowl the toffee was welded to the wall, and the other side was practically clean.
The car was bought in Yulmart for 65 thousand. They said that it was new, not defective, etc., and they could not explain why such a low price. Now I'm worried ...

[Air]

Air, I bought even cheaper in Technosila, the last warehouse copy, display case. I was also very worried, paid attention to every little thing.

It's strange, of course, that on the one hand it was welded.

Have you registered your car? Got a 5 year warranty?
Right here 🔗
There, among other things, that's what

VIP-service: prompt service and home visit of a service specialist. *

* For Kenwood CHEF kitchen machines only
* Only for Moscow and St. Petersburg

That is, since you are in St. Petersburg, you can call and call home after registering the car. At the same time, ask about the book.

Did you have a coupon for a book?
I have, but the old model. It has not yet been possible to get an answer on how to get the book either by phone or by various e-mails.But there was no time for them to write / call again, it would be necessary to do it.

***
UPD you do not worry ... just when there is a new technique, but for a lot of money, you always worry ... Everything will be fine. I'll go get some sleep. Good luck!

Launched flexi. I'll try to explain: girl-th: On the first circle, the rubber band fits snugly at 12 o'clock (let's conditionally divide the cup into a dial). On the other hand, there is no fit. On the next circle, it is adjacent to 1 o'clock, and so on. It turns out that during several circles certain places remain without contact.

Added on Thursday, 01 Sep 2016 08:23

The coupon for the book should be included in the package with documents. I did not have it.

And in what sense is the sense more comfortable?

- It turns off completely and you can not pull it out of the socket;
- All plugs are opened with one hand (they are on magnets);
- rises to the open position with one hand;
- there is a slow stirring;
- the bowl mount is one-piece, nothing gets clogged, it is easier to wash;
- the top cover of the bowl is collapsible in two parts and you can pull it out without turning off or lifting the machine;
Didn't seem to forget anything. Nothing significant, but it's more convenient for little things.

There is a really dubious innovation in the form of a hexagonal front socket and, accordingly, inconvenience with an adapter for old nozzles. I don't know why they did it, but there must have been some technical justification.

[kseniya D]

kseniya D, no, I have it wrong (
I couldn't find the coupon for the book. But as I understand it, you can get it without a coupon if you fill out an application on the website.

The girls ordered a Kenwood KKM 060 harvester with AutoCoffee, called, clarified, they have it in stock, but the reviews are not very much about this store, I am worried about something

[Tatyana]

if you fill out an application on the website.

When I tried, I had to enter the coupon number on the site. So nothing came of it.

Added on Tuesday 06 Sep 2016 12:56 PM

TatyanaSome of the girls ordered there, everything was fine. Don't get discouraged ahead of time.

Tatyana, I ordered, everything is in order with the store.

I bought a 020 car at autocoffee. Everything is fine, the delivery was chosen by Business Lines to Lipetsk. Came out 1600 or something to the apartment. Paid, delivered the next day. No complaints, however, the warranty card is not completed, there is no date of sale. I called - they said put the date yourself, there is a stamp there, save the electronic receipt of payment. All.

Thank you girls, they calmed me down, I will wait now, they told me that they would deliver to Penza in a week for 500 rubles

now there are a lot of 336 at a price of 14-16 thousand. Why such a low price? Or are they taken out of production and simply sold off? but on the site the price is normal.

PS I found an announcement about KM 010. I am waiting for an answer new and used sludge. Price up to 20,000. The reason for the sale - there is a second car. The seller trades in Kenwood himself. he and nozzles are many different in stock and on order. In general, I think - to take 100% new 336 or new (or used) 010? Girls, what can you tell me? I lean more towards 010 because of the power, but what if it is used? It's just that I'm morally and financially not ready to pay more than 20t (((

[Vinochek]

now there are a lot of 336 at a price of 14-16 thousand

These are the prices for these machines in the stores that sold them almost a year ago for the promotion of 4 nozzles + a car for free. In parallel, there was an action of 6 nozzles + 5030 car as a gift. According to retail chains, almost all buyers who, in principle, can afford to buy Kenwood, preferred the more expensive option. And 336 cars didn't go. A similar action with 5,000 vehicles is planned for October. Accordingly, on the eve of this, sellers are trying to merge 336 that are not specific in this situation at last year's price (this is a 15 year purchase and prices are significantly lower) in order to increase turnover.
Well, the 010 is basically an old car. It was replaced by 050. And the stale goods can be sold at an arbitrarily low price, if only they are gone. By the way, it is hardly second-hand.
And finally, decide how much you are willing to pay not just for the car, but for the entire set of attachments for it.For without attachments, it loses half the meaning of having it. For example, as part of the mentioned campaign in Media Markt in December last year, I bought Sens 5030 (2 attachments included) + 6 more attachments (total, 8 attachments) at the price of these six attachments. All this cost me personally 42,000 rubles (I have a 10% discount in the mentioned network)
So maybe it is worth waiting for a stock rather than buying a weak car or an outdated car?
Well, the power for the Kenwoods is a marketing value. Even the most seemingly weak machine works headlong better than similar power from cheap manufacturers.
By the way, Vinochek, out of respect for Crimea and its residents, when the action takes place (although its conditions are still unknown), I can help in the acquisition, if there are no networks in Crimea participating in the action (Media-Markt, Technosila, M-video)

For without attachments, it loses half the meaning of having it.

This is a controversial statement.
Depending on the tasks in use and the attachments themselves.

I bought a mini chopper from a girl who bought 6 nozzles + a car at a discount. That is, the same car as yours. She had two choppers, because she finished up to 6 nozzles. She makes cakes to order, min. 2 cakes a day. Of all add. nozzles are used only by a mini-chopper, the rest are sold out. Although at first I thought that everyone would be useful.

I have from add. nozzles cubes and mini-grinder. I need them. The chopper works almost every day. I would also like to buy a sieve-rub. Add. bowl and add. whisk. And that's all. I don't need anything else from the nozzles. Unless, an unknown American uncle will leave an inheritance, and then purely out of greed and a lot of money, umamalo, I can buy

This is a controversial statement.
Depending on the tasks in use and the attachments themselves.

Well, mathematically speaking, of course.
I used it rather as a figurative expression.
Everyone takes the configuration for the task.
Although, of the 8 nozzles, I personally do not actively use except that the chopper.
For me, it is functionally weaker than a cheap coffee grinder.
So I will listen with interest to the experience and suggestions for use will be crushed)))

than to buy a weak car or an outdated car?

sit on it and go or what? They are all for home use and strong and fit

sit on it and go or what? They are all for home use and strong and fit

I agree, and I spoke about this above, if you read carefully.
"Weak", it is not in terms of power, but rather a resource. And then, this is just my guess. I have no objective information on this topic.

[Paul]

Paul, this resource is more than enough for a family (there is nothing eternal)
most likely a matter of prestige (outdated, etc.)

[Paul]

Paul, this resource is more than enough for a family (there is nothing eternal)
most likely a matter of prestige (outdated, etc.)

And again I agree.
But for me personally, not prestige, but personal preference.
I love cars big, iron, powerful and heavy)))

I love cars big, iron, powerful and heavy)))

so be it a man

so be it a man

Thank you!
Touched, moved, overturned!

For me, it is functionally weaker than a cheap coffee grinder.

Here, I do not agree ... It grinds what neither a coffee grinder nor a mini-blender with a variable grinding speed can grind.

For example, dried tomatoes, dried green vegetables and so on.

Here, I disagree ... It grinds what neither a coffee grinder nor a mini-blender with a regulated grinding speed can grind.

For example, dried tomatoes, dried green vegetables and so on.

Are we talking about the same Kenwood AT 320A Multifunction Shredder?

most likely a matter of prestige (outdated, etc.)

it doesn't bother me much.

from the attachments I only need a chopper, a combine (where there is a knife, it is questionable). From a desirable, but not mandatory cube cutter, a wiping sieve, a potato peeler, a vegetable cutter.Since the anniversary is coming soon, the tips will be a gift (everyone has already been warned).

[Vinochek]

Vinochek, Zhenya, a wiping sieve in the season, it's a mess! Today I vzhiknula apples and pears on the marshmallow in a few minutes! In general, all the blanks with this technique began to be prepared jokingly, not like before

For me, it is functionally weaker than a cheap coffee grinder.

Again I disagree.
I have an average cost coffee grinder in the closet, because the coffee grinder also turns perfectly. Here I rely on the words of my family, because I don't drink coffee at all.

With the grinder, I almost completely stopped buying ground spices, but I pray them myself. I weigh the amount of pepper or coriander, etc., and grind it for a specific cooking. I like powdered sugar too.

Dried greens have already been mentioned above.

I have already made some sauces. Nut-fruit filling.

A lot, in short
When I get rich I'll buy another one to have two knives for different tasks.

But this is already a conversation about attachments, for which there is a separate topic.

You, Pavel, are very categorical in your statements. Personal experience is great, we are all here sharing our experience, while we do not consider it the only true

You, Pavel, are very categorical in your statements. Personal experience is great, we are all here sharing our experience, while we do not consider it the only true

This is your purely feminine perception of a purely masculine brutal nature)))
First of all, I do not consider my opinion "the only correct one" and I emphasize this in every possible way, urging me to change my mind.
And secondly, I always add "for me", "in my opinion", IMHO and so on.

Added Wednesday 07 Sep 2016 8:09 PM

When I get rich I buy another one to have two knives for different tasks

What is it for? Are there different knives for this attachment?

Ira, she thought about the sieve while cooking ketchup.

What is it for? Are there different knives for this attachment?

No, one knife. But it is not very convenient to wash it, I am afraid to wet the junction with the motor. And after some spices / herbs the smell remains.

But, here now you don't understand female logic

This is your purely feminine perception of a purely masculine brutal nature)))

And I would have bought the 010 model, although for some reason it is outdated. What is outdated in it ?! Yes, it is not produced anymore, and what? ... What is there in the 050, in my opinion, an improved model that is inferior to the 010?
I don't often use my big guy now. I manage everything with a small plastic Boshik.

I don't often use my big guy now. I manage everything with a small plastic Boshik

Mum-chikom?

And I would have bought the 010 model, although for some reason it is outdated. What is outdated in it ?!

Well, if you quickly buy all the nozzles, then nothing, probably.
But, apparently, in the future Kenwood will switch to hexagons on the nozzles on the low-speed socket. And then difficulties may arise.

Are we talking about the same Kenwood AT 320A Multifunction Chopper?

It is he! I use it and am very satisfied

[Jiri]

And the nozzles? ... I confess honestly that the nozzles for me, for example,
by and large are not needed. They lie there a couple of dead weight, that's it. A very extra bowl and all the default attachments are required.
And so, for me Ken is an amazing kneader, a proofer, and just a good guy!
Expensive! Very expensive! Insanely expensive. Until now, I am already aloud wondering about its acquisition, but ...
But I'm not a bit sorry that this Pretzel lives with me.
Yesterday I poured ingredients into it for a tough dough and left so as not to watch the torment. Then she came to the proofing and added degrees. All. The bread is wonderful! I changed the bowl and cooked the pasta. Little ones.
In general, as it turned out, the attachments to me, for example, are a completely secondary option.
Damn, the sufleika is lying derelict somewhere else. It didn't take root. I remembered about her while I was writing, but I had already forgotten.

Added Wednesday 07 Sep 2016 8:51 PM

Jiri, Irishik, yeah, a small 4th Mumchik.

[Vinochek]

Found an announcement about KM 010. I am waiting for an answer new sludge and used. Price up to 20,000.

Vinochek, if new, then, in my opinion, a very good option. The same appearance as in 060, only a smaller bowl. Everyone would be so out of date!

but the seller does not unsubscribe and the specified number does not answer. ((

but the seller does not unsubscribe and the specified number does not answer. ((

I don’t want to talk about sad things, but perhaps someone has already taken the sweet price and transferred money to the card ... (((

answered - used, but in very good condition ((

used the car for about a year and not often.

in general, I decided to send messengers) if it suits, then I will take it. Looking forward to Friday night. But for now I'm determined to take it.))
Here is a photo

I remind dear members of the forum that we have a separate topic about attachments. And also many separate topics for "just chat"
In a couple of days I will remove everything empty, so do not be offended!

I have an average cost coffee grinder in the closet, because the coffee grinder also turns perfectly.

But my coffee in it does not work out as it should for the Turks. I have already tried it for longer and at different speeds. Big does not matter! I also use the chopper quite often, but I don't have enough volume in it. He would have been a little bigger. Of all the attachments (I have a full set, only a wiping sieve and a juicer are missing) I almost never use a mill (well, this is because of laziness) and do not use a blender at all (it is too bulky, heavy and inconvenient for me. When you screw it to the machine, load on top, you can only get on a chair) Well, the ice cream maker is clearly overpriced, a stationary one with similar functions can be bought much cheaper.

I remind dear members of the forum that we have a separate topic about attachments. And also many separate topics for "just chat"
In a couple of days I will remove everything empty, so do not be offended!

Sorry, nasalnik

Something is tempting me to change 5030 to induction 096 ... all my thoughts I bought so many nozzles for it ... and sold others ... now again the flour of choice ...

it's tempting to change 5030 to induction 096 ...

Are there good deals for 096?
Are the attachments not universal and do not fit all machines (well, most)?

were .. and now the goods are sold out there ... maybe it will be used ...

[Helen]

Helen, I think, it will hardly be cheaper than on kenwood-bt.