Kenwood Kitchen Machines

bought in America, they took it to the service in the Czech Republic without question.

Because there are some international rules on this matter.

But the Russian service did not want to.

And here arbitrariness in this matter thrives until you poke your nose properly.

Today I tried to beat the eggs into panekakes using Maria's method. I set the temperature to 40 degrees, and added sugar a little bit. After a while, the eggs were beaten! That's cool ! Now down with the separation of yolks and whites!

But explain to me the feint of my car, which lives by its own mind: while whipping, I (on Masha's advice) raised the temperature to 50 degrees. BUT the car raised the temperature to 50 degrees and continued to raise it further.
I brought the temperature to 60 and dropped the speed on my own (well, as it should be with induction after 60 degrees), I continued to interfere barely.
Tell me what it was? Or should it be?

[lena_letochka]

lena_letochka, you can not separate eggs without heating with planetary mixers. And many do not share them with hand mixers either.
The temperature drops because it is protection. Suddenly you moved away, all of a sudden there is a lot of liquid and it starts to spray hot, etc. And then Kenwood will pay for damages in court

For the car to pick up speed, it was necessary read the instructions or watch the video press and hold the P. button for a couple of seconds, i.e., make a conscious action. And the speed will rise. And so for any change in speed at high temperatures. If you do not change the speed, press once.

while whipping, I (on Masha's advice) raised the temperature to 50 degrees. BUT the car raised the temperature to 50 degrees and continued to raise it further. Brought the temperature to 60

It doesn't have to be this way. If the temperature is set to 50, the machine should not raise it higher. Mine does not suffer from such amateur performances.

[lena_letochka]

Tell me what it was? Or should it be?

lena_letochka,

you can not separate eggs without heating with planetary mixers.

Next time I'll try without heating. I will compare the result.

It doesn't have to be this way. If the temperature is set to 50, the machine must not raise it higher. Mine does not suffer from such amateur performances.

Here I am about the same! Maybe I missed something?
Something the temperature has not yet obeyed me, then when setting 100 degrees - it does not boil with eggs (with water in 5 minutes)
That itself raises to 60 (instead of the exposed 50).
Well, I will experiment more

This is my favorite video))) but everything is so fast there the chef is a real professional
But the answer to the question why the car is gaining temperature by itself, I did not find there.
but there it cut off that the machine can cool down (the specialist said that if you need to cool down quickly, turn on stirring, and due to the movement of the whisk, the mass will cool down)

Practice, practice and more practice
I will observe the correctness of the temperature regimes.
Easter is coming soon, so I'll practice ... I wouldn't buy so much equipment - I would go, buy a couple of Easter cakes and sleep peacefully, otherwise I have to work

[lena_letochka]

lena_letochka, basics for beginners

Easter is coming soon, so I'll practice ... I wouldn't buy so much equipment - I would go, buy a couple of Easter cakes and sleep peacefully, otherwise I have to work

lena_letochkaAnd do not say, I sigh the same about it, millions of women live without thinking up worries and hassles and are happy, and we, members of the forum, are in an eternal search - what else to load ourselves with and what else to buy in order to relieve the load. Good luck!

Next time I'll try without heating.I will compare the result.

With lukewarm results, the result is better.

[Love Yu]

Love Yu, All new boxes / attachments have direct instructions for use, now a picture of "Twist" or "Bar" is drawn and what adapter is needed if you bought the wrong attachment)

Thanks now I will know.

Thanks to everyone who congratulated me on my birthday. Thank you for not forgetting. By the way, how do you know?
The other day I met with DeLonga's representative for Kenwood in St. Petersburg.
He confirmed that a project is being done now, then renovation, and by the end of the summer it is planned to open a showroom for master classes modeled on the Moscow one.

[Paul I]

Paul I, accept my congratulations and the best wishes!

Hello everyone ! For a long time I was "in the bushes" - I studied this topic very carefully - thank you all for the reviews and reviews of the models. At the meeting with Olga-Zvezda, I looked at them live, asked the girls ... As a result ... the torment of choice ... and stopped at 096. It seems like they should bring them on Saturday. Tell me what to look for and where to start checking-cooking? And I didn't quite understand about the gift-scale ... it seemed like they wrote that it was necessary to enter the promo code of the masterclass, but I didn't understand where ... when registering through the website ... bt ... I didn't see anything like that

and stopped at 096

Congratulations!
Great choice.
I won't say anything about the scales - I didn't get them.

I join in the congratulations!

you need to enter the promo code for the master class, but I didn't understand where ... when registering through the site ... bt ... I didn't see anything like that

I also do not have scales, when I ordered I did not know about the promo code. But, I suppose that you need to write it in the comment window when placing an order ... more, it seems, there is nowhere. Only the scales are not available now anyway.

Thank you! They just called from the store and asked about the scales, they said that they needed to tell them the code word, which I did, after which they seemed to promise to bring them. I will wait. But this is not the main thing ... how to watch the machine itself, what should you pay attention to? Well, it's clear, the appearance, and also ...? The book was also sent by mail

But this is not the main thing ... how to watch the machine itself, what should you pay attention to?

Well, if, "I was" in the bushes for a long time "- I studied this topic very carefully", then not so long ago they gave detailed instructions on this topic.

I did not get the car in the presence of the courier and did not check it. Optimistic, yes. It is in its original packaging and with a guarantee. If I bought it from my hands, then of course I would check - the appearance, equipment, operation of the nests and heating.

Thank you! They just called from the store and asked about the scales, they said that they needed to tell them the code word, which I did, after which they seemed to promise to bring them. I will wait. But this is not the main thing ... how to watch the machine itself, what should you pay attention to? Well, it's clear, the appearance, and also ...? The book was also sent by mail

I will help Galina ...
Page 148 has many answers to your question.
You can also use the search -> Print -> Ctrl + F -> "check"

[Maria]

Maria, Alexander, thanks for your feedback and help!

I did not get the car in the presence of the courier and did not check it. Optimistic, yes. It is in its original packaging and with a guarantee.

I also checked only the presence

By the way, the second bowl is super!
In everyday life this is not noticeable, but for example, on the eve of Easter, it is simply an irreplaceable thing!

By the way, the second bowl is super!

And the third ...

[lena_letochka]

In everyday life, this is not noticeable.

One cup is not enough for me in everyday life. More precisely, having a second bowl, even a plastic one from an ice cream maker, it would be much faster and more convenient to cook. I will definitely buy it on occasion. Maybe the joint venture will gather at the CU.

lena_letochka, I remember, you wanted a sieve. KAV930 appeared on Kenwood-BT. But, unfortunately, not for 2990.

Attention Saint Petersburg))
April 14 in the shopping and entertainment complex "Leto" Pulkovskoe highway 25 building 1
MediaMarkt store from 13 to 16
free MK from Kenwood:
spring berry tiramisu
Information from insta

Hello everyone. Everything is probably in the bustle, for a bright holiday. And I am with a question tormenting me)
Tell me what to do, you're a pro here!
Is it possible to buy a gray car from Italy (respectively, without a guarantee, but cheaper) or pay $ 200 and buy it with a +5 year guarantee?

[verchik]

verchik, I am never a pro But the new Kenwood would definitely buy + $ 200 but with a guarantee + 5 years

[uluna]

uluna, I forgot to say that we are talking about models 094 or 096. And I also understand that if there is an opportunity to allocate $ 1000, then $ 200 does not play much role. But also savings))) for additional nozzles)) says the hamster)))

that we are talking about model 094 or 096

Moreover, +200 and +5 years! God forbid the Hamster in a situation of "miser pays twice." And that hamster grows with nozzles at a terrible speed and regardless ... slowly but surely

PS: I mean that saving is yes, tempting and pleasant. But not by car! if it's about a guarantee or without. But saving on nozzles - here I am only "FOR" Promotional-new-someone-unnecessary

I thought about purchasing an assistant. Like Kenwood, just got confused in models, eyes run up. If I understand correctly, Kenwood KMM 020 has replaced 060. And which model will replace 060?
Has Chef Titanium KVL8300S replaced some model or is it something completely new?
Chef Titanium KVC7300S instead of Chef Titanium KMC050 or Chef KMC57008, or something new?

It is possible to buy a gray car from Italy

I beg your pardon, what does "gray" mean?
If the car is branded, then there will be a minimum one-year warranty.

[Vlad_Ru]

Vlad_Ru, and if the car was brought into the country not officially, then there is no guarantee)

To all who have not yet bought the advice: upon receipt, ALWAYS check the car!
Yesterday evening I took the Chef Titanium 7300 in one of the mVideo and, relying on the untouched package with sealed stickers, did not check it, but at home, having unpacked the box closer to night, I found that the head of the device was not fixed in the lower position. So it hangs up and down, if you do not press it down with your hand. You understand - the mood is completely ruined, this morning they dragged her for an exchange. Which is not fun in itself, given the size, weight of the box and the lack of any handles. And what is characteristic, after unpacking the sealed box and removing the upper foam, I immediately noticed that the head was not fixed, but dangled. That is, it turns out that the car was packed and already knowing that it is defective?
And further. There is a feeling that the prices for attachments have gone up briskly. I am guided by the main Kenwood online stores, for example kenwood-bt. For example, the AT950 meat grinder, bought yesterday in mVideo for 5990, is already on kenwood-bt 9990 today. The AT970 dough sheeter has grown in the same way.
I noticed that mVideo slows down a little with the rise in prices. There are dough sheeters / cutting for 5990 more. Out of fright, I ordered a couple.

[verchik]

verchikwhat do you mean not officially?
I bought two cars in Germany, my chef and major for friends, then I wrote on the official website that I now live in Russia and asked to indicate where I should do warranty repairs in case of anything, they sent me a list of brand workshops and indicated where to go to within a year.
The letter indicated where I bought and the number of the car.

not officially

What is it like? Unless it is stolen and you do not have purchase documents. Most modern firms have a worldwide guarantee. Even if it was presented to you without documents, there is a serial number of the car and everything can be easily restored and serviced using it.

Out of fright, I ordered a couple.

Just now, comparing the prices of this online store with the network ones, I come to the conclusion that it plays the role of an official scarecrow.

To all who have not yet bought the advice: upon receipt, ALWAYS check the car!

I fully support Vladislav, in my case there was just no warranty card, a trifle, but unpleasant ... The box was also sealed with stickers.

[MrVlad]

MrVlad, I think that in your cases no one unpacked your car, it is a factory defect and it was packed on the assembly line.If the seals are standing, then no one opened them, there are two of them, in practice it is quite difficult to forge them, and no one will do this. as for the nozzles. On the official website of Kenwood, prices were 5990 and remained. Some nozzles have dropped to 3990.

as for the nozzles. On the official website of Kenwood, prices were 5990 and remained. Some nozzles have dropped to 3990.

I don't know, maybe I'm looking in the wrong place.
As I understand it, the official site is: * kenwoodworld * com / ru-ru *
I go to the Nozzles for Chef section
There the recommended price only for a multi-shredder: 5490. In mVideo - 2990, though almost nothing is left.
There are no more prices in the Chef attachments section.
I go to the section "kMix attachments"
There are recommended prices:
Meat grinder 9900, dough sheeter / cutting - all at 9900 and so on.

nobody tried to whip the protein custard icing in the cache on a cake? or wet meringue cream?
I'm interested in the temperature, so as not to cook the proteins, but also to kill the salmonella ...

Tanya, you could ask in the same place

The syrup is boiled up to 118 - 120 degrees. And it's better not to beat in Kenwood, because when you pour the syrup, you need acrobatic sketches so as not to hit either the bowl or the whisk, in the first case, frozen caramel will remain on the bowl wall, in the second - the whisk will scatter everything over all over.

I always make meringue with an ordinary hand mixer.

[Irina]

Irina, I don't want sketches and syrup)))
I want to beat it with sugar and fsё ... I'm tired, huh ...

How do you want to pasteurize proteins? Do you have induction kenwood? Then you make an ordinary water bath, it just won't work

As I understand it, the official site is: * kenwoodworld * com / ru-ru *

This is not an official site either.

[Paul I]

Paul I, you are not right!

This is the most prestigious office. website.
Kenwood's only major official website.
🔗 - Russian version

In which you can change languages ​​(therefore, at the end there is a ru-ru) and get to the sites of other countries.

If without ru-ru 🔗
Then you will be taken to a site with a globe and an offer to choose a country.

All other sites with Kenwood are either of. shops, or office. dealers / representatives or not of.

Relatively.
At the meeting, the representative of Kenwood, that is, DeLongy in St. Petersburg, referred to this site as "not that official" on an equal footing with Kenwood BT. But I can clarify. Given that the Kenwood firm itself does not actually exist, I assume that this is possibly the former official site.

[Paul I]

Paul I, Yes Yes.
This is not very official that in almost all languages.
With an indication of the office, hotline. It is on this site that the 5-year warranty is made.

And all this is "not very official".
And Kenwood_bt is only in Russian. And at the top there is an inscription - Official reseller.
This is of. dealer, not office. Russian representation.
The Delongy Group has many brands, and all have separate sites.
Kenwood, Brown, Ariette and whatever else I don't remember.

When you are caught not by inaccuracies, then instead of admitting a mistake, you become such an inventor

How do you want to pasteurize proteins? Do you have induction kenwood? Then you make an ordinary water bath, it just won't work in a bowl

yes, induction.
will not work? sorry, I was counting on Kesha, I confess

[eye]

eye, you need something like a Swiss meringue.
Which is also heated, but without syrup.

Look here 🔗

I disagree that it does not replace a water bath
I and the yolks on heating, like in a water bath, do the rest

sorry, only that this year Easter came out far from Kenwood
I would write the recipe.

[Miranda]

name, sister !!! (from)
Miranda, honey, no need for a recipe, I ask for advice on temperature and time!
have a good rest!
and I went into exile)))

returned, everything is clear! thank you !!!

[eye]

eye, yes, there in the link everything is detailed, step by step with pictures, temperature, etc. A good recipe, well, a magazine in general.

It is necessary, by the way, to save the recipes. There are many good things.
If the author has not signed the new LJ agreement (and there is such a chance, since it has not been updated for a long time), then in three months the LJ administration will erase it.

[Gingi]

I thought about purchasing an assistant.Like Kenwood, just got confused in models, eyes run up. If I understand correctly, Kenwood KMM 020 has replaced 060. And which model will replace 060?
Has Chef Titanium KVL8300S replaced some model or is it something completely new?
Chef Titanium KVC7300S instead of Chef Titanium KMC050 or Chef KMC57008, or something new?

Gingi , yes, KMM 060 (063 - differences in equipment) replaced KMM 020 (023) in these machines, they are also majors, bowls of 6.7 liters, power 1500W and four sockets for nozzles, their younger brothers with bowls of 4.6 liters called chefs - 010 (013) and 050 (053), power 1400 W, the same four nests. In the Chef Sens line there are both large bowls and small ones, but already there are three sockets for nozzles, there is no medium-speed one, where only one nozzle went - a food processor (now this processor is also released on a fast-speed socket), the head lifting lever is at the back, plugs for the sockets fastened with magnets, bowl with handles and internal measuring table, power 1200W and 1100W. The new machines are similar to the Sens - also three nests, the same magnetic plugs, the same bowls + illumination in the bowl + are completed with 5 whisks. Chef Titanium KVL XL have a power of 1700W and Chef Titanium KVL XL Elite 1400W, with smaller bowls Chef Titanium KVC and Chef Titanium KVC Elite power 1500W and 1200W and another important touch of this new line of machines is another hook for kneading dough - a spiral shape. And who replaced whom is not so important, something else is important here - how much do you want a car, what are you going to do with it and other important things for you personally. Good luck.

[Paul!!!!!!!]

wet meringue "?

I just made a mousse cake - it's almost wet meringue. I agree with Ira !! We have to adapt ... and pour the syrup exactly between the protein and the bowl !! But it's not that hard !! I think we should try !!!
Swiss made too ... class !!!
Paul!!!!!!!Haven't come for a long time ...... HAPPY BIRTHDAY you!!!! And everything to you !!!!