Irlarsen
I have 125, but probably everything is very similar. at what stage can you not connect?
Sedne
In general, I can’t, the connection is not established, and I turned off the multicooker and kept the multi-cooker for a long time, turning off the multi helped once, but now it’s not.
Irlarsen
My. You press the plus and minus simultaneously. The light turns off. Press again, the light comes on. And then you press the multi-cook plus until such a long sound, very characteristic. Here it happens that somehow you hold your finger wrong, there is no such sound. Let go of the button, try again. You need to keep it for a long time. Do you hear this sound?
Strange, but I did not find video instructions for your multi on the site. For ours there is everything, plus a connection in ap mode.
Maybe I'm looking in the wrong place? Just in case here is the link for 125
🔗
Sedne
Irina, I did it all, it doesn't connect and that's it, I don't know.
Irlarsen
Do you hear the sound when you hold the multi-cook? Such a long sound ...
Sedne
Irinayes yes there is sound
Irlarsen
It's good. What do you do next?
What is your router? If your router works in two bands 2.4 and 5 GHz, then the device from which you are trying to connect to the multitool is better to pick up on the 2.4 network
Sedne
It does not connect to wi-fi, you have to wait for your husband to climb into the router.
Sedne
Fuh hooked up, however.

I wanted everything Brand 701 because of the multi-stage cottage cheese regime, here I created one myself, Brand is not needed.
Sedne
Girls, dear, help me to pick up the bowls, 1 good teflon (Philips bowls do not fit) and if there is a stainless steel.
Won't the Stadler 1 bowls work?
Masinen
Svetlana, it is not necessary from Stadler, it is thick and heavy, the temperature sensors will fly out. Checked by me)
It should be as thin as Polaris.
Sedne
Mariasorry, I like heavy
Masinen
Yes, but other multicooker is not designed for such bowls and temperature sensors start to fail, there will be a fountain of soup and porridge.

And be careful with stainless steel, you can burn the multicooker. One forum member so burned Polaris))
So look for Teflon. Try from Redmond.
Sedne
Will the Redmond RB-S500 bowl fit the Field? Oh even so? Did you burn it straight?
Masinen
I don't know if it will fit or not. It is necessary to take a cartoon and measure the cup)
Sedne
Well, someone has Polaris, as I understand the cups they all have the same, they probably know what fits
Nuta_
So my Fields 0517 began to glitch after using the Stadler bowl. And Polaris has very decent bowls with PIP 0501 non-stick coating.

Masinen
Anna, you just need to change the sensors in the service and everything will be as it was.

Sedne
Anna, this bowl is almost not for sale something
Irlarsen
Quote: Sedne
I wanted everything Brand 701 because of the multi-stage cottage cheese regime, here I created one myself, Brand is not needed.

Finally, our regiment has arrived !!!!!!! After all, the same class!
Please share, what is the mode for cottage cheese? First 40, this is understandable, and then how much and how long?
Sedne
Irina, I do so stage 1 35 g from 8 to 10 hours, and stage 2 65-70 1 hour, but I like soft cottage cheese.

Don't you have an extra bowl?
Nuta_
Maria, I handed over the multicooker to the service, they told me then. that nothing bad seems to have happened to the multicooker, only diagnostics have been done. After that, she really worked fine for a couple of months, and then again began to gush on the soup and stew. Although the bowl has already been used by my own.
Masinen
Anna, then this is not a bowl, these are bad sensors.

I remember they put new ones in my Redmond and I used only my own bowls and everything was OK)
Nuta_
Quote: Sedne

Anna, this bowl is almost not for sale something
Svetlana,
it may be temporary. Non-stick Redmond bowls and Daikin RB-A503 and Dupont RIP-A2 also work.
Irlarsen
Sedne, I have 125. There is another bowl.And I didn't have the audacity to ask for additional news ... And so I jump to the top of the floor, happy that they brought a saucepan to the International Federation of Journalists !!!!! And you also need to understand that for the correct execution of programs with the conditions (boiling off the liquid, reaching the temperature), the bowls must be almost identical to the original, otherwise the temperature sensors will be used incorrectly.
Nuta_
Quote: Masinen

Anna, then this is not a bowl, these are bad sensors.

I remember they put new ones in my Redmond and I used only my own bowls and everything was OK)

Maria, and what service did you contact?
Zinfandel
Quote: Sedne

Girls, dear, help me to pick up the bowls, 1 good teflon (bowls do not fit) and if there is a stainless steel.
Congratulations on your purchase! I am glad that our ranks are growing.
All bowls that fit the popular 517 model. Native Teflon Polaris PIP 0501.
Redmond cups that fit their cartoons RMC-M20, RMC-M22, RMC-M23, RMC-M70, RMC-M90, RMC-M150, RMC-M4500, RMC-M4502, RMC-M4503, RMC-M45021, RMC- M4525, RMC-M45031, RMC-M4510.
I have steel REDMOND RIP-S2 and Teflon RB-A501 (RIP-A2).
The Polaris PIP 0501 bowl has a sharper (angle) transition from the walls to the bottom compared to the Redmond RIP-A2.

There is also steel Redmond RB-S500 and Teflon REDMOND RB-A503. But I haven't tried these, although judging by the model range, the bowls should also fit.

Caution: the steel bowl is light, there may be problems with frying a small amount of food, since the bowl may not compress the spring with its weight and the ten will not reach the bottom of the bowl. I use steel for large volumes of liquid dishes. In general, in this multicooker, the spring is very tight and no empty bowl squeezes the spring. This can lead to overheating. It is necessary to watch, to heat an empty bowl with a closed lid so that the lid presses the bowl against the heating element.
Sedne
Zinfandel, thanks for such a detailed answer and for the congratulations.
Sedne
You know the great thing is that the heating can be turned off at any time and even during cooking.
Irlarsen
And even from the couch !!!!
Vic odin
If only heating could be turned off by default ...))) Dreams ...)))
Sedne
Oleg, you can, by wi-fi.
Vic odin
Sedne, It's clear! I just need heating, in particular, in five percent of cases, and it would be more convenient for me that it was always turned off, and when needed, I would turn it on, than turn it off every time!)
Sedne
I made pies, well, it turned out very well, I did 1 hour + 20 minutes on the other side, next time I will try 40 + 30. Baking test, condensation did not drip on the baked goods, I baked in a Teflon bowl Polars, yes, I bought it

Wi-Fi multicooker Polaris EVO 0225

According to this recipe I made

Pies with minced meat in a multicooker Brand 37501 (vernisag)

Irishka, credit for your recipe
Nuta_
Quote: Sedne

I made pies, well it turned out very well, I baked Polars in a Teflon bowl, yes, I bought it
They turned out great pies, Svetochka ... Are you happy with the new cup?
Sedne
Anna, yes, a good cup, as it turned out.
Nuta_
Quote: Sedne

Anna, yes, a good cup, as it turned out.
Congratulations on your successful purchase!
Vic odin
Tell me, is it possible to manually force the cartoon to perform the next stage, without waiting for the end of the current stage?
Thank you in advance!
Zinfandel
During the cooking process, you can change the temperature and time directly on the multicooker or through your tablet / phone. If one of several stages is running, then the parameters of the current stage are changed. Therefore, if you reduce the time of the current mode to a minimum of 5 minutes, then the transition will occur in 5 minutes. If the next stage is not conditional, but a temperature one, then you can change the temperature of the current stage, equaling the temperature of the next one.
Irlarsen
And this, by the way, is VERY convenient. Personally, after a couple of months I have accumulated my own convenient everyday recipes. But the same initial frying, it is always different, then the amount of products is slightly different, then you will cut it smaller and it's just cool that you can increase or decrease the stage time on the fly, or while sitting on the couch you decide that this time perhaps potatoes or that there is a smaller cut in the saucepan and you can reduce the stage time. What you want is what you do - blooper !!!!!
Zinfandel
E-do made a discount for 3000r on the "Recycling" action. It's still expensive, of course.
Vic odin
And please take a picture of the drip tray from the 0225th model!
Thank you in advance!

PS: I can buy myself a 0225yu assistant in Eldorado today for a promotion!
And by the way, no one has written, do notifications come to the phone when the program is minimized?

Quote: Sedne
baked in a Teflon bowl Polars
Can you tell me which cup you bought?
Thank you in advance!


Added Wednesday 13 Apr 2016 11:15 AM

Yesterday I bought Polarochka 0225 in Eldorado!) I managed to steam the lemon for 20 minutes while the current was running!))) The lemon was cooked confidently and efficiently!))))
Zinfandel
Congratulations on your purchase, our regiment has arrived.
Quote: Vic Odin

please tell me which cup you bought?
I wrote on the previous page which bowls (teflon and steel) Polaris and Redmond fit. On the Internet, it is easy to find by code. Options from other manufacturers are also possible.
Vic odin
Quote: Zinfandel
Congratulations on your purchase, our regiment has arrived.
Thank you! And I'll look by the bowls!

Yesterday I bungled "Rice with" Hawaiian mixture "in the cartoon!
Sedne
I haven't written here for a long time, and I haven't cooked in this slow cooker for a long time, I wiped it out yesterday, made soup on a manual program (well, it was very tasty), and then I made buckwheat with chicken, I haven't eaten such tasty buckwheat for a long time, it turned out airy, fluffy , very tasty.
Kestrel
Irlarsen, Zinfandel, Sedne- girls, what are you doing ?! After all, only out of curiosity I got into the topic to watch - now I want this one too

All recipes

New recipe

New Topics

© Mcooker: best recipes.

map of site

We advise you to read:

Selection and operation of bread makers