Tanyulya
Elena, yes, right there.
Rituslya
Quote: Tanyulya
husband's dinner
Oh oh oh,Tanyushwhat a tasty treat !!! : nyam: Just juicy such deliciousness!
Tanya, and this is about how many potato tubers?
Natalia K.
Rituslya, Ritus, have you cooked anything from meat?
If not, then look in the book that is attached to Kuzinka on page 29.
Tanyulya
Rituslya, Ritus, 2 potatoes ... large
Rituslya
I,Natul, in my opinion, only chicken parts were fried in it. And myasko? ... I don’t remember something. Probably, not.
Yes, I confess, Natus, it’s just now I’m just getting too hot to cook in my cousin. And then, only thanks to you and your ideas.
Yeah,Tanyush, Thank you. I also want one or two servings. And then, from a great mind, I’ll like to polish this potato to break through, and then after cooling it is not very good. I do not like.
Natalia K.
Quote: Rituslya
But I wonder if you can cook a pork ham in a cousin so that it is also juicy, or is it better not to translate the products?
I wrote this ritual to you for this post.
You wanted to make a ham
Masinen
Girls, the cousin, of course, is very good, but it will not replace a mini-oven, if not dancing))
All the same, it goes in addition to the oven or mini-oven.
But the cousin is good for all sorts of fries, wings and that type of food.
I baked my Serbian pita in it and I didn’t like it, but it looks great in the mini-oven, so that's the way it is))

Rituslya, Ritulya, so you have already given up the kitchen, and now you have given up on the SV type, can you be sent to the section of recipes for SV and immediately get it and put it next to your cousin?
Natalia K.
Quote: Masinen
can direct you to the recipe section
Masha, if you send our Ritulka to all the sections of recipes for the equipment that she has, then I feel that Ritulchik will no longer enter the kitchen
innesss-ka
Quote: Tanyulya
yes, right there.
Don't understand, without a regular uniform? Did you install this form directly on the heating elements? But what about the pin? It turns out that the form did not fit the heating elements?
Tanyulya
innesss-ka, I put this form in the mold, the pin got in the way of course ... well, where am I going to put it, the mold bent ... it staggered, but everything was prepared perfectly! We are not looking for easy ways. A form without a stirrer is on my way, so I'm waiting.
innesss-ka
Tatyana, understandably . I thought I had missed something.
natalia27
Yeah, you still need to buy a form without a pin, but I just bought a new one with a stirrer, hurried up.
Ava11
Virgo, please tell me how to stew cabbage, program and time.
Tanyulya
today my tests are like a cupcake ... more dough to the biscuit eggs + sugar + milk + flour
Multi-oven DeLonghi FH1394
I am in a hurry
Multi-oven DeLonghi FH1394
Multi-oven DeLonghi FH1394

like monkey bread .. the tijell dough was in the refrigerator ... exactly half a month aa: swoon: I forgot about it
it turned out like a shortbread, soooo delicious .. I didn’t try the cupcake, my husband said it’s delicious .. well, I don’t like sweet pastries, but I tried the bread .. oooo very tasty !!!
Multi-oven DeLonghi FH1394
Multi-oven DeLonghi FH1394
Multi-oven DeLonghi FH1394

I baked everything with a regular bowl in a mold from Nordic Ware, the pin was just in the hole.
Suliko
Tatyana, well, how satisfied with the unit in general?
Tanyulya
Satisfied !!! I don't have a lot of eaters, it's just right for me! Here is a bowl without a stirrer, and I, like Matroskin, will be twice as happy!
Suliko
Tatyana, the pastries are beautiful and appetizing
It's good that the cousin liked it, maybe we'll wait for the video! Maria also promised a video with her cousin
Tanyulya
Quote: Suliko

Tatyana, the pastries are beautiful and appetizing
It's good that the cousin liked it, maybe we'll wait for the video! Maria also promised a video with her cousin
The video is filmed, edited. 3 pieces (video) however
amargar
Quote: Ava11

Virgo, please tell me how to stew cabbage, program and time.
I stew on a slow cooker, 40 minutes
Suliko
margarita, are you cooking with a stirrer?
Antonovka
Yyyyyyyy, I'm reading the topic, while on page 87. I keep thinking - it is not necessary. But in the end I thought of it - an advertisement for Yulmart popped up (and I trust this store). There is now Delongy, however, white at 16,310 rubles, but I liked the black one more. Well, I think - an official guarantee, we must take it. I'll fill it out and think, maybe I won't go for the order. And there is still some kind of action Traffic light (-10%), hammered in a code word (and suddenly it slip through, there is just some strange description of the action), as a result, the price comes out to 14679 rubles - it's clear that you need to take)), albeit white
On weekends the price was high there))
Suliko
Lena, for such a price you should definitely take it! I also took in Yulmart, everything is of high quality there.
With a code word like that, the price of a robot vacuum cleaner became 10,000 less in Yulmart, I didn't hesitate, I ran right away
Antonovka
Suliko,
Ell, I already ordered))
marlanca
Antonovka,
Lenus, congratulations ..., ..... immediately order a bowl without a pin ...
Antonovka
marlanca,
Thank you, Gal)) I will definitely order))
amargar
Quote: Suliko
margarita, are you cooking with a stirrer?
Yes, by the way, the next model has already appeared in Germany, the difference is only in the form of a stirrer and there are no inscriptions on the front panel, but only badges.
innesss-ka
Quote: amargar
it differs only in the form of a stirrer and there are no inscriptions on the front panel, but only icons.
There are 8 of them. The very first icon is a grill. Apparently, they added the 8th program. And it looks like a grill grill included.

Multi-oven DeLonghi FH1394. Multi-oven DeLonghi FH1394

Ava11
amargar, Margarita, Thank you so much!
Mirabel
margarita, Is there a link to it?
amargar
Quote: Mirabel
Margarita, Is it possible to reference it?
you're welcome 🔗
Mirabel
Thank you!
Price, as the saying goes, our neighbor's local baby mom is expensive!
amargar
Quote: Mirabel
Price
can be found a little cheaper, I've met for 258


Added Monday 28 Mar 2016 11:11 PM

Quote: innesss-ka
There are 8 of them
exactly, but I didn't even notice
Belka13
While I was thinking, arguing, I need, I don't need, buy, don't buy, everywhere cheap Cousins ​​ran out. And for 25000 it is expensive What a bad luck! There is, however, a "Burunduchok" store, but it does not inspire confidence in me at all.
Antonovka
Belka13,
Ol, delivery "gray", store warranty - 1 year. I called there. I don't think that you have service centers in the city from them ((It's a pity that we missed Kuzya in Yulmart ((
Belka13
Lenaand there was a discount at 003 too. And I slowed down. Now I am suffering.
And the reviews about this store are not very good. So there is nothing to risk. But the current price, in my opinion, is also too much. Good though.
I left a request on the Yulmart website, but the price is unlikely to be the same. And I want more white, although in the end it makes no difference.
Antonovka
Belka13,
So the price for me, even with all the discounts, is a little expensive ((My Kuzya is already at the pick-up point, and I'm still toiling - I don't need to, because I want to and pricks
Rituslya
Belka13Olik, I found a cousin here.
🔗
I won't write anything sensible about the delivery, but I personally ordered a nozzle for Ken from them.
Natalia K.
Quote: Antonovka
My Kuzya is already at the pick-up point, and I'm still toiling - I don't need to, because I want to and injects
Antonovka, Lena, why have you changed your mind to buy Kuzin
As if I would not regret later that I did not buy it
Belka13
Rituslya, Thanks for the link. It is somehow scary to make a prepayment to a not very well-known store. What if they don't have it? And with a guarantee it is not clear what.
Rituslya
Belka13, with delivery and with a guarantee, unfortunately, I will not tell you anything.
I ordered a product that was out of stock, called back and confirmed, and after a couple of days they brought it.
It's easier for me, yes. Nobody asked for an advance payment.
Antonovka
Natalia K.,
Natasha, I haven't changed my mind yet. Tomorrow I will go with my husband to the fence point, what he will say. On the weekend I will start raking unnecessary devices
Natalia K.
Lena and right. Change your mind nenada
amargar
and I ordered the latest model for myself, I completely lost my mind
Antonovka
amargar,
Quote: amargar
and I ordered the latest model for myself, I completely lost my mind
So, sir, then we must definitely take it! When will the latest model reach us !!!
Belka13
Yes, it turns out that it's cheaper for me to buy on CU than in Russia.
Masinen
And for me, the coating was torn off in a bowl with a stirrer ((
I didn't breathe on her, I did everything to avoid it, and all the same. There were two scratches to the metal. I cooked chicken wings, but the wings themselves turned out to be crazy
Tanyulya
Mash, were the wings mixed?
Everything is fine with my coating!
Masinen
Tanyulya, so I had half a year all is well.
Over time, the coating becomes thinner, and then scratches appeared.
Well, yes, with wings, the fries were hammered on the mixer and that's it)
Well, I was waiting for this, I kept thinking, when will it happen))

In principle, I was not upset, I don’t cook those liquid dishes in it, but for potatoes and wings it will do.
natalia27
Maria, I very rarely used a mixer and for a year the bowl seemed to be normal, and recently I decided to fry the wings and when I marinated them, I added mustard seeds. And after that I got a bowl with a very strongly, as it were, erased coating, At first I thought that I had washed it badly, but alas ... Such an expensive device, and the coating in the bowl is penny. Sad
Masinen
natalia27, Natalia, yes, the coating sucks, but not even the coating, but the shape of the mixer.
They had to do as in Tefal AktiFray. Here at Tefal, an excellent mixer will not clog anything under it.

I also fried with sprinkles))
BUT I don’t regret it, maybe it would have been ripped anyway, sooner or later.

All recipes

New recipe

© Mcooker: Best Recipes.

map of site

We advise you to read:

Selection and operation of bread makers