Alex100
Oksana, right here
Irina.A
ksyusha1997, I do not know how to insert links, try through the search engine "Mtsvadi - kebab in eggplant" Alex100, Thank you!
Alex100
Irina. A, not at all) By the way, how much time did you cook?
Irina.A
I won't say for sure, but somewhere in the region of half an hour, I didn't time the time, at that time the second portion was being prepared in the airfryer
marinastom
I got my frying pan too. I collected, examined and fell into bewilderment: there were two orphan bolts left, where to attach them, I don’t know? She fixed the black outlet inside, fixed the handle, but where are these?
And another question: who keeps how? Maybe there are some smart solutions, except how to empty the shelf in the closet?
Admin

There should be no extra bolts and screws
One screw goes to the socket, two to fasten the handle to the lid - and that's it! So the rest were sent as a bonus!

I keep it assembled, in a closet in the kitchen, in close proximity, since I use it often.
Recently I baked pork ribs, today fish. The frying pan is in demand.
A.lenka
Quote: Admin
There should be no extra bolts and screws
One screw goes to the socket, two to fasten the handle to the lid - and that's it! So the rest were sent as a bonus!
I also had two extra bolts. Maybe it's spare?
A.lenka
A big request to all owners!

Please write down the diameter of the burner in cm, on which you are installing. I'm interested in a specific experience, not a manufacturer's recommendation.

And more ... Has anyone encountered the problem of "walking" the GG on the stove? My GG is very unstable on the middle burner. Who solves this problem if it occurs?
Admin

Based on the manufacturer's recommendations, I put the pan on a 5.5 cm diameter burner. (Measured in fact) so that the pan is just in the center of the fire.

The frying pan will walk on the stove - this is normal, since its bottom is so arranged, with a hole inside, and round edges. I have a second grill gas and also wiggles around the burner.
Way out: I put a large rack for pots on the burner, and I already put the pan on it - everything is ok! Nothing dangles as the area becomes large under the pan.
The stand has already been shown somewhere in the subject, along with a frying pan. An ordinary kitchen support for pans, pans for hot.
As an example, I can recommend looking at the coasters in the airfryer - about the same.

marinastom
Tatiana, thank you!
Already made cutlets. I didn't have time to try it myself, I ran away to work, but people liked it.
I did it on the smallest burner (I have a Mora stove, Slovakia), its grates also have a peculiar configuration. When I put it, it dangled a little. But I saw that on the lower pallet outside there are a number of protrusions-pimples, I twisted the pallet and everything stood steadily, the edges of the lattice just between the pimples fell comfortably.
A.lenka
Tatiana, Marina, Thanks for the answer!

Quote: Admin
The stand has already been shown somewhere in the subject, along with a frying pan.
Have you shown in this thread?
Admin

Yes, Lena is somewhere here
Anyway, I will cook in a pan and take a photo of the stand
Olechka.s
Elena, see Reply # 150 Feb 26. 2015, 09:41 on page 8
Admin
Olya, thanks for the help and long search

Miracle frying pan grill gas D-512 with glass lid

This is how I put the pan on ANY wire shelf so that there is a stable surface under the pan.
And this one, on the legs, turned out to be even better and more stable, leaning on its legs.
kortni
Girls, tell me, may such a grid be needed for the frying pan discussed in the topic?
Miracle frying pan grill gas D-512 with glass lid
Admin
No! Grill-gas frying pans must have a hole in the center for access to fire-heat.This cover can be solid, closed. And the lattice with a hole and a big hole in the center
marinastom
If only this plate is used without a lid, well, like, as in the next topic they discussed the pribluda from China.
ELENI
Can you please tell me if it is possible to somehow place this wonderful frying pan on a gas stove "domino" (a 2-burner stove built into the tabletop, burners with a diameter of 10 and 7 cm). Maybe someone has experience with this frying pan on such a stove or it's impossible.
Anyutok
I wrote on the wrong topic
ELENI
ANYUTOK, buda you are very grateful for the link "on that topic", if my question was asked "on the wrong topic"
Anyutok
ELENIit's me about myself
marinastom
ELENI, something everyone is silent ...
Have you already tried it or are you just planning to buy a frying pan and doubt whether it will stand steadily?
Do you have a gas panel, with grates or what?
A.lenka
I first substituted the oven grate under my grill gas for stability. So she burned out! Lattice, that is. Now I'm putting on a cast iron grate from the old stove.
ELENI
marinastom, I'm just planning to buy such a frying pan. I already ran around with a centimeter near my built-in "domino", well, a frying pan with its dimensions does not fit on my stove. Either the diameter of the burner will not fit (burner 10 cm), or on the small burner the pan will rest against the gas supply knobs. So I thought, maybe someone, having this stove, somehow adapted, or you can somehow put this frying pan on a large burner.
marinastom
Maybe I'll write nonsense. And if you try to remove the handles after ignition and setting the flame? ..
And all the same, it seems to me, you can. After all, there are pans of 30 cm in diameter and they are set. Should, anyway.


Added Thursday 23 Jun 2016 03:29 PM

I can suggest the following: I'll see what we have in Eldorado from the hobs and try to come to them with the bottom of the pan, since the store is across the street from me. But I don't know when I can, we are now all living in the country.
Admin
Quote: ELENI
somehow adapted, or you can somehow put this frying pan on a large burner

In household goods stores there are special coasters for gas stoves, so that specials can put pans of different sizes on them - look.
Or you can just put a grid support for the pan, a small round one - I do this for any dishes, including small ones.

The grill gas is designed for a 6-7 cm bottom burner.
ELENI
marinastom, I will be very grateful to you. Of course, it is better to try on the bottom of the pan in practice than my measurements with a tape measure near the stove burner.


Added Friday, 24 Jun 2016 03:38 PM

marinastom, I have a built-in two-burner gas panel Whirlpool
Admin

Demonstration Frying Pan Grill Gas Part 1



Demonstration Frying Pan Grill Gas Part 2



Demonstration Frying Pan Grill Gas Part 3



Grill Gas Frying Pan Demonstration Part 4



Gas Grill Frying Pan Demonstration Part 5



Frying pan "Grill-Gas". Grill meat.



What can be cooked in a gas grill pan.


All recipes

New recipe

© Mcooker: best recipes.

map of site

We advise you to read:

Selection and operation of bread makers