Washer-dryer

I have Iobe brooms (PMM and SSM) - Electrolux. Moreover, the dishwasher is even older.

I like washing wool, mohair. You can't do that with your hands!

You washed the wool. car?

And mohair too. There is a program. There is also for fine fabrics. And most importantly, there is a choice between three degrees of drying - from completely dry (for synthetics) to slightly damp (for bed and table linen).

our LG F1496AD3 does not jump, everyone is happy

I want to buy the same one. Please tell us how long you have been using it and whether you are satisfied with its operation.

For those who do not have extra money.

A modern household washing machine (CM) is designed to rotate during the warranty period. Additionally, it can wash and even dry within the specified period.
And, the more modern it is, the less durable it is.

Basically, the longevity of the CM is determined by the design of the bearing assembly and cheap capacitors in the power module.
With electronics it is easier, the elements can be bought and replaced, the firmware of the microprocessor also lends itself.
And the access is easier.
And with rotation it is worse.
For the average layman, as always, the number of megapixels per minute is sold

Yes, at high speeds the laundry will squeeze out better, but at what cost?

A small educational program, anyone interested.

Two options for the horizontal bar:
1. Scrap is embedded between two parallel walls (top-loaded CM);
2. The scrap is cantilevered in one wall (CM with horizontal loading). The embedment depth is proportional to the guarantee.
Which is more durable?

So, in narrow CM this embedding is smaller.
The load on the bearing (p / w) unit is proportional to the square of the speed. So count the difference at rpm 600/800/1000/1200, etc.

Bottlenecks in this node:
1. Oil seal. It flows when the shaft beats (wear of the p / w or the neck of the shaft under the p / w), wear of the sleeve itself or the sleeve on the shaft, "woodiness" from time to time, exposure to chemistry;
2. P / W. Afraid of oil seal leaks. From them corrodes, "hits" (increasing leaks and breaking the shaft);
3. Shaft. Not made of the best steel. Afraid of stress, breaks at the landing site (avalanche process).

At step 2-3, the user hears noise. At item 2, first - a rumble, at item 3 - a metallic knock.

It is checked by raising (swinging) the drum edge.

If the car knocks at an early stage, it is recommended to immediately make at least a diagnosis by disassembling it.

A month ago I climbed into my own (1200 rpm).
P / N were ideally (in general, they stand with a margin for unstressed load). I tried on spare p / w on the shaft. And then he was subdivided. And this shaft cannot be easily pulled out of the car, since the metal tank is non-separable.

And this disease is treated indiscriminately with Loctite or kernels (the latter is not for long).
It is treated with analysis by a doctor-turner.

For accelerated mechanical aging of the SM, a soft shaft and an unsuccessful radius edge on the shaft sleeve, with which the oil seal contacts, were invented.

This is very short. I will not overload with information.

In the repair business, careless areas are interesting:

1. "Diagnostics". A "repairman" arrives, without looking, calls zeros for repairs, you refuse and pay for "diagnostics";
2. Swollen capacitor for 10 rubles. CM doesn't work. Further, - either "diagnostics" or selling to a repairman for 300 rubles;
3. Hammering Chinese p / w with a sledgehammer

When choosing a CM, do not get fooled by the tinsel of marketers.
Read reviews.
Please note that there is a DRUM cross on sale (not a tank).
This suggests that the tank is collapsible (it does not need to be sawed and expanded) and carried by the turner to a large machine.

Bearings are only recommended by SKF.

Washing machine Xiaomi Mijia Internet Pro goes on sale
Designed for 10 kg of laundry, has 22 washing and drying modes, supports air updates.
The price is $ 425.
--------
The price was good. But we don't sell them like that?

🔗

Peace be with you, dear Bakers! I was puzzled by the purchase of a new machine and found an offer for a Daewoo washing machine (assembly Korea) for 12 kg with drying, direct drive, foam generator, steam washing.

Respond, happy owners of Daewoo washing machines! Are you satisfied with such an assistant or what makes you sad?