Steam brush

Thank you, Irochka! I'll know. She does not spoil things without attachments. Distilled water. already bought it in a steam generator after reading girls' reviews about suffering from wig breakage.

Girls, I ran to the Epicenter SC. A seemingly sensible guy consulted me and told me everything.
The steam generator pump hums and growls in my brush and this is how it should be
The steam from all the holes does not go evenly, since the water is supplied inside in a thin stream and soars mainly from the central holes, and into the outer ones, as it gets.
Steaming pauses are short, but this is normal due to the design of the appliance.
So everything is in order with my brush and it remained with me. I'm happy!
Once again, thank you very much for the guidance and advice on the purchase and operation of the brush!

Alenka212,
How much does your China steam brush cost including shipping?
The steam brushes sold in Moscow are also Chinese.
I think where to buy, which one will come out cheaper.

I bought on aliexpress. At that moment there was a discount and the price was $ 38.85. I paid through the qiwi terminal. There is still some conversion from rubles to dollars. Everything was about 1300 with -1400 kopecks. Together with the shipment. The seller was not rated at all. After a while, my link was not found at all. So I took a chance and "I'm worried" now.

Alenka212, thanks, you can give a link to your seller. The price turns out to be almost half the price.
So I did not use the tundra kiwi terminal. Where are they at least?

I would love to, but this link does not open the page now. I was looking for a similar one from the pictures. Specialists say it is better to pay through a card, so that if something happens, run to the bank and write a statement about the interruption of the money transfer. And through kiwi in case of dishonesty of the seller and if you miss the deadline for opening the dispute, you can not get money. It seems so, I have not really penetrated yet.

Hello everyone! Girls, read here admiration about this brush, went and bought. So what? I just tried to iron my husband's shirt. And she first gives me steam, and the chkrz spits water for two seconds! And not just spits, but pours well from it. It does not matter in a horizontal position or to hold it vertically, it still pours water. Was it like this for everyone, or do I urgently need to change it while still under warranty? How long should the water be allowed to warm up? You can iron as soon as the light goes out or wait 10-15 minutes (this is what the consultant in the store told me).
I urgently ask for help from the audience, otherwise my husband will find out and I will be sooo sad (the second brush will be useless, but I buy everything).

Pinky, what are 10-15 minutes ?! What kind of consultant is so illiterate?
The red indicator is on when the brush is heated to the desired temperature. As soon as it goes out, you can hover. As soon as it lights up, stop. Otherwise it will spit.
Use it with pleasure, the brush is cool!

Girls, please tell me the model number of this brush. I'll try again to go to the Epicenter. I probably already got them, because I was asked to say which model, they will call and find out themselves.

Yes, I, in fact, do so - the light went out, I float, I burn, I stop. But, when I am soaring, that is, I hold the button, the water sprays directly in a stream. And the time between the on / off light is literally a few seconds in total. And on the box it says that the steam is constant. Probably I got some kind of left brush, and the box was opened, and there were no instructions in it, and there was no clothespin. Tomorrow I'll try to adapt again. And if it doesn't work out, I'll go change, complain. The release of the brush in 2012, maybe this is just the same defective batch I came across? It's terribly insulting.

yara, the box says: expert steam brush EWe-SB03 Art .: 31006011.
Good luck!

Pinky, I only get splatters when I float with the red button on.
And the intervals for ironing and mine are very short. I ran to the Epicenter SC, just in case, they checked it and said that everything should be so. Mine was released in March 2012.

Lenochka, thanks! I will try again tomorrow (I will send my spouse to work and how will I start ...) My brush is also released in March 2012. Perhaps I just need to adapt to it. Confuses me that the box was without instructions and a clothespin. Maybe someone already handed over, but they shoved me? Although, it is her own fault, this consultant rinsed my brains out, I did not check the box, and they refused to check my brush on the spot - they have no water for these purposes, you see.

Aha, they also refused to check with water! They looked at me as if I was crazy, like as you can !!
By the way, there is no instruction there, they explain nothing plainly. But! It is stamped with a guarantee! And where was your signet slapped?

In general, girls, you can buy a brush, and then go to the counter of the Service Center and let them check it themselves. They have water there. But if something goes wrong, immediately, without leaving the store, you can change.

And they didn’t put a seal on me, they told me to keep the check and, if necessary, they would make a replacement or repair at the service center on the basis of the check.

Girls, remember I wrote that my brush shook and knocked out electricity, and after that I even worked it normally once.
But all the same, now I am very afraid to use it, and a work colleague suggested that I take it apart to look at it.

Initially, one wire was very bent and the insulation was severely damaged at the break.
To all this was added the fact that the water passes into the holes through a mass of plastic adapters, and the very last of them, which is right in front of the heater - it turned out to be leaky, it already turned black on one side - the water leaked out and got onto the bare wire - from this babakh even made a hole in the heater!

So this brush would not work for a long time, the last time I was able to steam it off only because 2 hairs from the entire vein remained alive in the damaged wire, and the water that had seeped inside had already evaporated after a short circuit. Plus, I tried to keep the brush exclusively vertical, so the water did not spill over and over, and I was able to work a little more.

Now there are 2 main tasks:
- put the adapter for water supply in front of the shade on a thermo-sealant, so that it is guaranteed never to leak
- replace the damaged wire

I asked to take pictures, when it will be repaired, if someone needs it, I'll post it.
The most important thing is that there is nothing complicated in the design, everything is repairable, but I was so worried ...

When I bought it, I tried three pieces and rejected it because of spitting water - I remember they wrote about the dignity of this brush exactly what just floats. I already thought the whole batch was defective, but I was lucky to take it. But the troubles did not end there. At home, I pressed the button with such force, it seemed to me all the time that the stronger, the better the jet of steam - it broke, pressed it so that it would not be pulled back. Without even finishing the first jacket. The husband disassembled, repaired. So the brush is perfectly repaired and, due to the simplicity of the design, this is not a problem.

The most important thing is that there is nothing complicated in the design, everything is repairable,

So the brush is perfectly repaired and, due to the simplicity of the design, this is not a problem.

+1

in the service, the guy said that there is nothing special to break in it (but it breaks through one) - inexpensive parts affect and yet some kind of under-thought of the design IMHO. When water + electricity is near, you still want some guarantees

.... the water leaked out and got on the bare wire - from this the bum even made a hole in the heater!

When water + electricity is near, you still want some guarantees

Something I'm already afraid of her,

I got a steam brush too! I am slowly mastering.

Anya, what kind of steam brush did you buy?

Of course, the brush is too heavy, but .... I still can't refuse the iron. Now in the morning I collect everything that needs to be stroked (for two members of the family, sometimes the third one sucks), sort and turn on the brush and iron at the same time. A brush for knitwear, synthetic blouses, ruffles, raincoats, and an iron for flat surfaces. This is somehow more convenient for me. And when I look at the mountain of washed bedding, I longingly think about the steam station ...

similarly! similar.

And when I look at the mountain of washed bedding, I longingly think about the steam station ...

And I read on the forum that many do not iron the bed, and I stopped doing it myself. And somehow it happened calmly. At first I stroked according to the Dachnitsa method - to fold it neatly and sit on it, and then I stopped doing that too. True, I have a washer with a dryer and I always turn on the drying for 20 minutes. Not to dry, but to straighten the folds from the hot air with steam after spinning.

And I read on the forum that many do not iron the bed, and I stopped doing it myself. And somehow it happened calmly.

So I, too, have not ironed bedding for a long time ..... Such savings in time, effort and electricity are obtained!

And I haven't ironed the bed for a long time!

And I! And I also read somewhere that the structure of the fibers is disturbed during ironing, so natural fabrics should be ironed very carefully, or not at all. (and so it became to me joyful from what I read, because it turns out that now I am not at all lazy, but on the contrary, I am doing everything right).

yara,

And I! And I also read somewhere that the structure of the fibers is disturbed during ironing, so natural fabrics should be ironed very carefully, or not at all. (and so it became to me joyful from what I read, because it turns out that now I am not at all lazy, but on the contrary, I am doing everything right).

Oh how! And I'm not a lazy person at all, but an advanced hostess

Oh how! And I'm not a lazy person at all, but an advanced hostess

Exactly!!!!!!

Yes, in theory, I also know everything (hygroscopicity, etc.), but the family is already accustomed (first by the mother-in-law and mother-in-law, but fixed by me.) should I sleep on this? " One salvation is wrinkled linen (just not coarse calico): after washing it looks pretty decent without ironing. The construction will end, I will definitely buy. Maybe by that time it will be out of order and the need for a steam station will disappear (Damn, why did I buy a high-quality one!) But for now I'm ironing ... It's true not all at once. I wash our and my daughter's towels and sets one by one. And I iron, though dry, one or two things in the morning along with the clothes I prepare for going out. Tggda not so boring

Alena, did the brush come from China by parcel (box) or parcel post (package)?

The package was called "small package" in the documents. The branded box (with foam inside, as it should be) was pulled from above with some kind of transparent polymer material. Even the drawing on the box was visible. There was a Taobao sticker inside. (I'll take a picture). I bought on Aliexpress. But it looks like the seller has a small business: he buys on Taobao, and then resells it for a little more. Found one here ( 🔗). But delivery there, mamadorroooogaya how much will be!

Delivery by parcel is very expensive, parcel post is cheaper.
The weight of the parcel is no more than 2 kg. "Small packet" is like a parcel post.
Alena, don't you remember the weight of the small package?

I don’t remember, but probably less than 2 kg, because the brush + foam + cardboard box and polyethylene are still light. And it was referred to as a small package. On Ali, the shipping cost is already included in the price of the goods (if delivery is free). that is, in the $ 38.85 I paid.(excluding the conversion of rubles into dollars) included the cost of the brush and delivery.

Now the cheapest brush with used / delivery costs 69 dollars.

[lega]

I have a washer with dryer

legaGalya, what kind of washer you have, otherwise you need my candy in the trash. 7 programs do not work and the warranty has just ended

[lega]

legaGalya, what kind of washer you have, otherwise you need my candy in the trash. 7 programs do not work and the warranty has just ended

Answered here, otherwise we are in steam brushes about washing machines.

girls .. as I understood .. brushes in Russia need to look for .. so that the price is no more than 800r was .. and the power is not less than 1500 ... and if 1000 in total .. then it is useless ... will not steam?

o

Cheaper than 2500 rubles. I have not found it in Russia.
I ordered it on Taobao, while I paid 780 rubles.

that's what I found

🔗

Name of product: Steamer IRIT-2352 (steam generator) 1500W, 1.0l
Power 1500W
Heating time: 90 sec
Steam consumption: 30 gr / min
Water tank: 1 L, steam supply: 30 min / 1 L, steam hose: 1.6 m, wire length: 1.8 m, thermostat protection: 145 ?, thermal protection: 216 ?, weight 2.3KG / pc, included: steam hose, clothes clip, brush, nozzle with 9 holes for steam spray, steam temperature 98 degrees. Compact and lightweight. 1200rub.
🔗
Name of product: Steam electric brush for clothes IRIT IR-2303
Power 900W
function
increased steam release
Water tank volume 70ml
function vertical steaming,
increased steam release,
cleaning rod,
free rotation of the cord,
work indicator light,
hanging loop
Electric steam brush for IRIT IR-2303 clothes 750 rub.

🔗

Category: Garment steamers and steam brushes
Name of product: Steam electric brush for clothes IRIT IR-2302
Power 1000W
steam ironing mode
Teflon-coated outsole
Water tank volume 50ml,
steam ironing mode,
dry ironing,
work indicator light,
vertical steaming, 690 rubles

o

Cheaper than 2500 rubles. I have not found it in Russia.
I ordered it on Taobao, while I paid 780 rubles.

and what power is there?

anina, good luck!

🔗 Here is an interesting brush of 1200W power, they called it a steam generator.

🔗 Here is an interesting brush of 1200W power, they called it a steam generator.

found on yulmart! but reviews ..: girl_red: of course you are better off (shocked .. tried it out) ehhehe ... it can be seen through online stores such things are better not to buy ..

anina, good luck!

Thank you!

girls and you can't watch this video ... you use your steam brush like this .. or not? or you have something else .. video below ..

🔗

virgins .. well, please answer .. this is how the steam should come out or not .. so that there is something to compare with ... my sister ordered this one on Biglion ... 🔗

to at least know what to pay attention to ..

Larissa, well, something like this. With our brush, you can both float horizontally and on weight. Only the intervals when steam is on are very short. The steam is not very strong, but it will steam out both jeans and a raincoat. I unbuckle the container with water, if not all of it, just in case, and store it separately. Somehow like this.

I just bought a slow cooker and again the same thing ... I read and think, can I take it?