Steam brush

Thanks for the support! Sometimes it is very difficult not only to make a choice, but also to relive the events associated with the choice, delivery and operation. It's so good that there are YOU, caring companions in the fight for a better future !!!!

Girls, I also received a parcel notice today. I'll be with a steam brush tomorrow too.

I received the package . Before work. The most difficult thing remains - to live until the evening, unpack and check. How to survive?

Here I got my beauty. I hope it won't disappoint.

[Alenka212, irman]

Girls Alenka212, irman congratulations on the brush. I hope you enjoy your work

Here I got my beauty. I hope it will not disappoint.

Congratulations
Where is the beauty from? Chinese?

Yes, they are all made in China.

Something I got a copy of Russian, there is even such a warranty card with seals on the sale.

Congratulations
Where is the beauty from? Chinese?

I meant where the goods were bought with a brush, because I want to

Girls Lena, Irina, how did the brush go through, why are you silent?

It is on sale in Moscow 🔗) Now 🔗, but the price tag is completely different.

Les, I took this on Avito for 1400, a new one.

[irman]

irman , so this is the kind of brush that is sold in Ukraine? Or is it an analogue of another company? You can look for them on Avito .... thanks for the hint!

Yes, everything is the same, only for different countries under different names they sell.

See what I found. Do you have such? 🔗

I have been a steamer from 🔗 I use it. Absolutely different sensations from ironing are now, somehow it became easier, hung up and run with steam, but it differs

[novelty]

I have been a steamer from 🔗 I use it. Absolutely different sensations from ironing are now, somehow it became easier, hung up and run with steam, but it differs

How did you manage novelty use it for a year?

Something I got some kind of Russian copy, there is even such a warranty card with seals on the sale.

IRMAN. Where did you order the brush, how much did it cost?

girls, why is there a clothespin? who used it? and how do you iron - press the surface against the fabric or iron at a distance?

girls, why is there a clothespin? who used it? and how do you iron - press the surface against the fabric or iron at a distance?

Tanya, this clothespin is for very thin fabrics such as nylon, etc. I don't press against the fabric, but I soar a little at a distance.

Girls clothespin for making arrows on trousers.

Thank you!

Thank you!

IRMAN. Where did you order the brush, how much did it cost?

Les gave a link to him 🔗, and I bought on Avito (new) for 1400 rubles.

but you can completely model, I will also look, by the way, the link does not open

but you can completely model, I will also look, by the way, the link does not open

They changed the address 🔗 - travel steamer STEAM HAND.

Does it cope with heavy curtains?

Leska, and how much does the brush cost according to your link, I didn't find something

Leska, and how much does the brush cost according to your link, I didn't find something

2500 RUB

[Anechka-Qween]

Here I am the brake, I saw this Temka, but did not go in, who knew that the "steam brush" is a steamer, I thought - since I have a steam generator, why do I also need some kind of steam brush
Yesterday I stopped by at Epicenter, but did not know about this miracle yet, and in the evening I again stumbled upon Temko and decided to read it. And this morning I went there again and bought

Above there were open boxes, I took out one - the button sank, climbed deeper, took it out from the bottom, it is clear that the box had not yet been opened - I got an excellent copy, nothing rattled. The manager boy denied, but I raped him and forced him to check with water.
Neither the handle nor the button gets too hot, comfortable in the hand

I am very pleased, as I do not digest small things to iron
It comes to the ridiculous - I don’t wear beautiful sundresses with ruffles, I store them, because I don’t have the time and energy to iron them, and now it’s ready

Anechka-Qween - what a young fellow you are with this Temko, you thoroughly found out everything and brought it to us, a huge human thanks to you

Yulia, honestly, it's so nice to read your kind words. I am glad that now you, too, will steam your things at the expense of times. Use it to your health!

Yes, with the advent of this brush, you look at the wardrobe in a completely different way. Or rather, what can be worn at the moment, especially when there is no time to iron beauty such as ruffles with an iron. And the fact that the brush is instantly ready to work on any surface is also a huge plus.

this is exactly the purpose of the word, they stopped frightening me, I just love them very much and there are things that I wore once, when I bought, but washed and mustache ... ironing is better to shoot. so now I have added things from the closet!

Wow, what a Temka, just saw! Cool unit !!!
And along the way I remembered that somewhere on the mezzanine I had a steamer from the USSR gathering dust - a completely red plastic iron with holes in the sole, steam was pouring from there! Then I sewed, it was very comfortable with him. I forgot ... I will definitely get it!

I also have this Soviet red.

I also have this Soviet red.

Are you using? Or should I not get it?

Girls, iron the tulle like this brush, share your impressions?

Girls, I also bought such a brush. I steamed 3 suits for the guys by September 1, the brush did a great job !!!
That's just the question, the handle, the button does not heat up, but the head itself, where the holes for the steam have heated up strongly, and cools down for a long time, is this so necessary? And sometimes instead of steam, a trickle of water slips, is this the norm? I am worried about having time to pass it within 14 days, if that.

Yulechka, the head of the brush is heating up from the hot steam. You sent a lot in one go, that's why she's so hot. In my brush, if not immediately after the button lights up, release this same button, then there may be a little water instead of steam. I would say that these are a few drops, not a trickle.
I recommend watching this moment with the button.

[1. Whether the thread is shaking inside the brush.2. Check the pump and brush heating.3. Steam outlet outside and be sure to check whether the on button is heating up or not. off]

Something a long time ago I have not been in our Epicenter ... perhaps we should take a walk, even though we go far!
The instruction was memorized as our father ... just in case, and there is always some water in your purse!

So who will buy this brush, be careful,do not be lazy bring some water with you and check the brush in place. So what to check
1. Whether the thread is shaking inside the brush.
2. Check the pump and brush heating.
3. Steam outlet outside and be sure to check whether the on button is heating up or not. off
Happy purchase of a working brush everyone

Anya, thank you for the Temka and for the answers - advice! I'll see it again. I ironed the entire tank at a time, and then another half. The brush handle was not heated, the button too. And I discovered that the head itself was very hot, and almost an hour had passed, and it was still warm. Is it the same for you? And a trickle of water skips occasionally, splashes and steam again. Can really be connected with pressing a button.
And so very happy with the purchase! And he collects the hairs, and steams - and does not strain with the creases from the iron))) (it's a pity yesterday I ironed the arrows with an iron, otherwise I would have tested the clothespin today)

Today I almost got a heart attack
I'll tell you so that you are prepared for the fact that this can happen.

I bought an extension cord from the same Expert firm together with a steam brush, with each outlet disconnected with a separate button, and through it I actually turned on the brush.I like to turn it off with a button, and then when it gets cold, I unplug it and put it in the locker.

But this Expert differs from Maxxtro and Logitech - they do not have a common button that turns on the extension cord itself, there, if you plug it into an outlet, it is already considered ready to work - you can press the buttons. This is Makstro:



And the Expert has an additional button that includes it in its entirety. And in general - it is much smaller in size, that is, it is more convenient to carry it around for different needs.

So today I inserted a plug from the brush into a new extension cord, then turned on the extension cord button and ... bang - the steam brush in my hands shuddered from a powerful spark inside the device
Knocked out the entire line.
It's good that we have done it wisely - everything is grounded. Let's go turned on everything back on the dashboard.
The extension cord survived.

The brush began to be afraid to turn it on again, half an hour passed in thought - how reluctant to go to this Epicenter, to take it, they will change the figs, take them to their SC for inspection, but the brush is needed, I can’t live without it. But then I decided to turn it on directly, without an extension cord. And lo and behold - she turned on
As a result, it worked again, and I steamed everything I needed.

We sat with our son, thinking, thinking - what is to blame and like a dog is buried:
- or a brush "well done"
- either an extension cord

Julia, I didn’t even know that there are extension cords of this company in the Epicenter.
I was just about to order a Maxxtro extension cord with separate 3m switches on the outlet. I see you have both now.
I'm going to Epicenter now, I'll look at these extension cords. Can you compare to me which one is better to take? When I still get to the Epicenter-question, I'll go to a completely different area. If I take anything, I don't like to mess with shipments, or is it better than Maxxtro? I have to go to the kitchen.

Here I am the brake, I saw this Temko, but did not go in, who knew that the "steam brush" is a steamer, I thought - since I have a steam generator, why do I also need some kind of steam brush
Yesterday I stopped by at Epicenter, but did not know about this miracle yet, and in the evening I again stumbled upon Temko and decided to read it.

Exactly the same story! And at first, Temka was not interested, and I just was at the Epicenter, but I had no idea that this happens there. And now I accidentally came here and already want, want, want !!!!! Could it be a photo of the box to know what to look for and how to ask?

[Qween]

I started reading the topic from the very beginning, Qween, I'm bastard from thee !!!! I imagined how you came to the store with the "odeagu" in your arms and began to steam it

Before that, I went to the store three times with my clothes and soared there. And before I came and said that I would try the device in action, no one else had tested the steamer. The sellers were very surprised that I wanted to steam, but agreed.

[Yara]

Yara, stop dying - go to the Epicenter for a steam brush thing

[nila]

nila
I answered in Temko on extension cords

Extension cords, pilots, etc.
https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&topic=110323.0

[Yara]

Yara, stop dying - go to the Epicenter for a steam brush thing

Ira, do you already have? And you are silent?
I just saw this topic, just started reading. Are you saying worth buying? And what, and ask: give a steam brush? And sound the price?

[Yarchik]

Ira has long been - Yarchik, scroll through the topic - there I demonstrated ironing of breeches
The price was when I bought it - 199 UAH, then it seems they became at 179 UAH, now it seems like that. I like her - all the problem clothes are now on her - with pockets, seams, ruffles, etc.
They are in the Epicenter, in the department of household appliances - that's what they call the Expert steam brush

And sound the price?

Now 179 UAH

Ir, now I'll read everything, and tomorrow I'll run to buy. It is a pity that I did not know before, otherwise today I was already there. If what, I will ask you

Now 179 UAH

Thank you!!!!!