KitchenAid Mixer

[marlanca]

marlanca, that is great! And the master took my mixer, promised to see it by Tuesday.

[marlanca]

marlanca, that is great! And the master took my mixer, promised to see it by Tuesday.

I think everything will be fine too ...

especially if the dough is very hard, such as a recipe made in 21 seconds in a food processor.

I only use it. From grains. Well, it's not very solid.

Well, girls ... be careful with a glass bowl in a water bath

[Svetlenki]

Svetlenki,
Svetlanka, what a pity that ... ..., I read in the reviews about the water bath and the broken glass bowls ...

I read in reviews about the water bath and the broken glass bowls ...

Pancake! And I have never met such a review !!!

Oh, Brightwing! How pathetic ((((
Well, don't be upset😘😘😘

[marlanca]

marlanca, Irina F,

Thank you girls! Amazon is at its best - it compensated me for the purchase amount. But science for the future - no water baths with this bowl. I mistakenly assumed that if it is possible to use the microwave and freezer, then a water bath is also possible. But no!

[Svetlenki]

Svetlenki,
Svetlanka, at the office. the site says so:

“KitchenAid 4.83 L glass bowl is standard on the KSM156 mixer.

Bowl, volume 4.83L, with removable base and silicone lid. The bowl is made of durable glass and can be washed in the dishwasher, freezer and microwave. There is a special drainage chute. The bowl is marked with metric and non-standard measuring scales in cups, ounces, liters and milliliters. The removable base secures the bowl securely in the mixer. "...

Svetlanka, at the office. the site says so:

Well, they didn’t write that the water bath NIZYA

I'm in love with her anyway. I will buy one more, how will I get compensation for this

Girls, it's me again ..... all upset, I have no strength (((They repaired my mixer, said that we could have broken it ourselves and now I understand that it was so. When we got it, it had a whisk , and so he touched the bottom of the bowl. And all the other nozzles too. Is this how it should be? Tell me, is it not right? I decided that something was wrong, began to twist this planetary thing, which apparently should not be done in any case Sometimes it didn't spin, but I continued anyway. As a result, he stopped biting his head, but the plastic gear broke. The price of the issue in America is 250 rubles, we have more than 2 thousand in all their centers !! The difference is 10 times !! ! Well, this is generally unthinkable simply ..... I found it for a thousand, I urgently needed and plus work. Now everything is spinning and it's great.
BUT again, these nozzles reach the bottom, that is, the mixer seems to be nodding. And a thing that is not speed, but does not allow it to open from both sides to the end, moves, and before that it did not move to the end. Either something interfered with her and the master repaired, or, on the contrary, broke it. Here's what to understand, tell me how you are?

[Rina27]

BUT again, these nozzles reach the bottom, that is, the mixer seems to be nodding.

I suspect that there is a need to adjust the screw that is responsible for the distance between the nozzle and the bottom of the bowl. It is difficult for me to write in Russian, since I only know this terminology in English.

This is actually done in the factory for every mixer. But you can also at home, of course, yourself. You need to look on YouTube, there is a video about it - here it is






Rina27, I sympathize that it happened. But the main thing is that they fixed it! Or you can call the master, explain the problem to him and he will certainly tell you how to do it

[Svetlenki]

Svetlenki, Thank you! I think it's really about the screw. Yesterday I started looking in the internet and came across instructions. There is just about this screw ...And I immediately calmed down) otherwise I was already beginning to think that I got an obvious marriage. This is her fault, the instructions must be read! And at first glance it seems that nothing complicated ..... Here is my not very good lesson for someone to help avoid mistakes.



But she didn't call the master and it was good that she did so) I thought that first you need to find out everything

Joined the ranks of the Kitchen Aid!
Last Sunday my lovely 5KSM175PSEMS - Artisan, 4.8 l of the color "silver medallion" came to me. A meat grinder and a dough sheeter were a bonus.
The meat grinder was immediately tested and did not cause any complaints (ground crackers for breading and chicken fillets for cutlets). The next experience is a biscuit. Yesterday I kneaded the dough for cottage cheese muffins, I really liked the process and the result.
In the process of looking, getting to know and feeling, I discovered that one of the blades - with a silicone rib - does not want to be put on the shaft. It rests on the ledge and then on nothing. With the rest - a whisk, a spatula and a hook for the dough - no problem, they can be put on and taken off easily. In bewilderment ...
I can't insert a photo (

[Ferry]

Ferry, Larissa, congratulations on your wonderful helper, let him serve for a long time to the delight of the hostess. The color is beautiful!

It rests on the ledge and then on nothing.

a photo ... Did you look inside the nozzle? Maybe some kind of hangnail prevents the nozzle from getting up to the end?

Friends,
I am looking for TWO like-minded people - who want to jointly purchase a transparent bowl for KitchenAid 5qt for 3,585RUB (or $ 57.99 if paid in dollars) with delivery from the USA to Moscow for 615RUB ($ 9.95) for all (the order condition of $ 150 must be fulfilled, that is, delivery will cost slightly more than 200RUB)

Did you look inside the nozzle?

Yes, I looked in and poked around inside. I did not find any crime. It looks no different from the others, but it feels like the shaft rests on something. Spun it this way and that, I don’t want to exert force, it should be easy to dress. They delivered it to me from Minsk to Gomel, so I won't be able to go to the showroom and try on a spatula for other copies.

[Ferry]

Ferry, Larissa, and the scapula exactly for your model? Well, it's clear that it's probably a stupid question, but did you look at the packaging of the scapula? Is the model specified? Or at least some scapula model?

Friends,
I am looking for TWO like-minded people - who want to jointly purchase a transparent bowl for KitchenAid 5qt for 3,585RUB (or $ 57.99 if paid in dollars) with delivery from the USA to Moscow for 615RUB ($ 9.95) for all (the order condition of $ 150 must be fulfilled, that is, delivery will cost slightly more than 200RUB)

They were out of stock for a long time, but now they appear again ..

Well, or I'm looking for a company to buy out who has an order for $ 92 at least on ruelala

Svetlenkii, Sveta, the spatula was included, that is, it was not in a separate package, but built into the foam packaging of the mixer itself. For the 175th model, an additional 3-liter bowl is relied on and this paddle, whether it is wrong.

[Larissa]

and this spatula, be it wrong

Larissa, calmly, without panic. Inhale, exhale, rest and once again go to the shoulder blade. Well, it can’t be that I don’t put on. Or call the store, consult them. Put on this attachment directly by phone in real mode. I think you can figure it out!

I went to your gallery. In addition to the photo of your general beautiful kitchen, I did not find a photo of the nozzle. Load it up as you try to put it on - I'll pull it out here.

Put it in the gallery, only it is rotated. Photo from the phone.
I tried to get help from a consultant online, wrote a message, silence in response. Nothing, we'll figure it out, I hope)

[fedan]

fedan, delivery 9.95 from $ 100.

Here is a photo



Yeah ... And it doesn't go on ... It's amazing ... You have to call the store and try to figure it out on your phone. Apparently the marriage of the nozzle is a narrowing inside the nest, if it does not let you put it on the pin further ...

I will try to contact the store. I'll see what happens.

Upd: I contacted, they answered that this happened, is subject to replacement.Bring a spatula, a warranty card, we will send it to Moscow for replacement.

They were out of stock for a long time, and now they reappeared

They appear every 10-12 days. And they hang on the site for 5 days. Then they disappear. And they appear again. I have been monitoring the site for Kitchen for a long time

[fedan]

fedan, delivery 9.95 from $ 100.

Thank you) exactly, it is!

They appear every 10-12 days. And they hang on the site for 5 days. Then they disappear. And they appear again. I have been monitoring the site for Kitchen for a long time

Strange somehow .. I ordered a mixer and wanted to add. bowl, but the bowl was not available, only a mixer was brought ((so the purchase of the bowl had to be postponed until.

[Ferry]

I contacted, they answered that this happened, is subject to replacement. Bring a spatula, a warranty card, we will send it to Moscow for replacement.

Ferry, Larissa, great news. Now wait patiently. I got a replacement manual mixer Kitchen ... I sent it to the seller, and then waited 10 days - they do not immediately send a replacement. As I was told on Kitchen's hotline, the seller sends them, and then they send a replacement.

Then tell us about your impressions of the small 3-liter bowl. It is very interesting to me

[Svetlenki, Sveta]

Svetlenki, Sveta,
The 3L bowl is the first thing I tried. I ground the rusks into it, poured it and put the minced meat into it. She mixed it in it (there was meat - two large chicken files). It is quite easy to use.

Strange somehow .. I ordered a mixer and wanted to add. bowl,

Mixers are whistling constantly, and accessories and other equipment will disappear and appear

Girls, I want to order such a mixer for Rulala. Please tell me how to order there)))

Girls, I want to order such a mixer for Rulala. Please tell me how to order there)))

Choose the mixer you like, put it in the basket and place an order ..., all the windows fall out sequentially ...

Girls, good afternoon! Yesterday they brought me Artisan, started trying of course :) a question arose about the speed switch. On the mixer, 10 speeds are declared, but the fact is that the toggle switch makes only 6 switches .. That is, from 0 to 2 speeds, jumping the intermediate ones. Does everyone have this or just me?

[GardeevaDi]

GardeevaDiseems to be all. It is strange why in America they didn’t think of a lawsuit over this?

The instructions say: "The speed control lever can be set in an intermediate position between the speeds listed above in the table to achieve rotation at speeds 3, 5, 7 and 9, if more precise adjustment is required."
That is, 10 speeds are counting intermediate positions.

[GardeevaDi]

GardeevaDiseems to be all. It is strange, why in America they didn’t think of a lawsuit over this?

It is not clear of course

The instructions say: "The speed control lever can be set in an intermediate position between the speeds listed above in the table to achieve rotation at speeds 3, 5, 7 and 9, if more precise adjustment is required."
That is, 10 speeds are counting intermediate positions.

Oh, I didn't see it. That is, do I understand correctly that everyone's toggle switch switches 6 times instead of 10?

I am very happy with the Kitchen grater attachment. For a long time they stood with me and waited in the wings, because Kitchen is standing in the corridor and dragging him, you know. But here I had a difficult job - to rub the cheese with 10% fat. With my hands I knew for sure that I would get a messy crumb. She brought in kitschen. What a smart guy he is! At first speed, excellent curls, the drum did not heat up, did not melt cheese, there was practically no waste

Well, today I was rubbing a pumpkin. Rubbing a spring pumpkin is a pleasure. I just cleaned it and my hands were shaking with fatigue, and Kitchen did an excellent job of rubbing it. I turned it on and quickly rubbed everything. I also changed the bow to the heap, the drum was changed. Everything is very easy. Again, there is little waste.

Wash quickly.

I lamented that the coolest kitschen drums were put in an additional set (for cheese, for example).But with the drum included in the standard set, it turned out just the way I need it! Hurrah!

Girls, do you think the mill attachment is a worthwhile thing or not? Something's eye fell on her, I think whether to take it or not ...

[Viky_sik]

Viky_sik,

There will be no flour in the store. Only if you filter out half. Extremely
rarely used device. But when it feels like it, I love him)).

Hello everyone. I almost lost my peace and sleep. It turns out that the grinding sieve exists for Kitchen ... More precisely, it was produced and then Kitchen discontinued it. Now it is very rare on ibey for some crazy money

Here she is a beauty

[Svetlenki]

Svetlenki,

What for is she to you ?!)))

[Scarecrow]

Scarecrow,

That's why Nata wrote that she "almost" lost ... I would have at least one hundred square meters of land planted with raspberry bushes

Well, let me raise the level of knowledge of members of the forum on Kitchen I suppose no one has ever seen such a nozzle.In any case, I first met this rarity

[Svetlenki]

Svetlenki,

))) I saw. And there are mills of previous models and something else, if I remember - I'll write)).

Wow, what a nozzle. But I want to say that the auger juicer-meat grinder is cooler.
Recently I processed 15 liters of meat at a time. I just put a big saucepan under the juice, and a large bowl under the cake.
I can't imagine how many times it would be necessary to clean the tudy-court sieve.

Also, this auger crushed raspberries and pears last year. I love Kitchen!

[Twig]

Recently I processed 15 liters of meat at a time. I just put a big saucepan under the juice, and a large bowl under the cake.

How good! And you don't need to look at this sieve for crazy money

Wonderful. Wouldn't show a sieve Twig, would not tell how the berry is processed. All of you need to drag ticks - no to come and boast / share experience

Sveta, I probably wrote several times how it is cool to process raspberries and currants on an auger! I don’t throw the cake into the freezer, and in the winter on the compote.
And the graters are cool, I love them very much. Do you remember when you looked after the little combine, I told you not to be lazy to use Kitchen

[Twig]

Twig, Veta, by the way, I listened to you about a small harvester

I probably wrote several times how raspberries and currants are cool to process on a screw

maybe I didn't have kitchen then, in general, I'll look closely then at the auger

[Svetlenki]

Svetlenki, Sveta, I just wrote about the auger attachment for a meat grinder, and not a separate auger juicer. By the way, I'm not happy with the juicer.

And here is more detailed, please! ))) I looked towards the auger juicer attachment, counted zeros in the price, grieved. I read negative reviews, cooled down. But I want to wipe raspberries and juice
Is this one that is put on a meat grinder?

[Ferry]

Ferry, she!
I bought a set right away, a meat grinder plus a screw. If you buy separately, most likely there will be no meat grinder base, that is, Kitchen implies that you already have it. Check this point when buying.

From soft pears puree comes out, from apples - juice with pulp, that is, a third of the jar with sediment.
Black currant and gooseberry puree, red currant and raspberry - liquid puree.
I really like the continuity of the process, and watch how the cake flies out like a sausage.

Red currants can be directly with twigs, well, the cake after it can be thrown away, the compote from the cake comes out bitter because of the seeds.