Food processor Gamma

[Lanna]

Lanna, honestly, I don’t know ... I still have my own knife alive. Maybe the girls will tell you.

Tell pliiz, who uses the mill included in the kit, how does it grind grain and cereals, if you constantly use it, and is the degree of grinding regulated? I think to buy only because of the mill, because there is a different meat grinder, and I don't want to be mistaken

write who took Gammu in recent years? NOT disappointed ?!

[BOEZ69]

BOEZ69 in order to be disappointed one must pin special hopes. What I expected when buying was an electric meat grinder, which I did not have. And I got it. It is not very powerful, but the meat twists and turns itself. I bought a juicer for her, made tomato juice, used the mill only for checking - it doesn't grind into flour.
I use the can opener only on occasion, the shredder is also rare - there are other adaptations.
In general, I was not disappointed.

[BOEZ69]

BOEZ69 I used the mill only for checking - it doesn't grind into flour.

tell me, but does it grind very badly? are grains obtained? you can't ask to take a photo, for example, grinded cereal. I wanted to buy this device only because of the mill. and now I don’t know what to do (((

as far as I know, the grinding fraction in the mill is regulated .. just need to understand

tell me, but does it grind very badly? are grains obtained? you can't ask to take a photo, for example, grinded cereal. I wanted to buy this device only because of the mill. and now I don’t know what to do (((

I ground cereals in large fractions, yes, there are grains, but when added to bread, everything is fine.

Do you have a Gamma7-1 electric meat grinder? how do you like her?

ElenaMart thanks, although I doubt it, but I will take it, a full-fledged flour mill is a little expensive to buy - until I master this one. I used to grind on a coffee grinder, but it is already in the scrap

I also doubted, but now I use it and everything suits me.

Prompt when buying Gamma 7-1 (set # 1) there were no kebbe attachments and nozzles for making homemade sausages. Question: from which email. meat hands fit nozzles to her

[BOEZ69,]

BOEZ69,
Victor, I was also very disappointed to receive Gamma without a sausage attachment. It turns out that the plant changed the complete set of this nozzle long ago not in any modification Gamma is now, and it used to be. : pardon: Attention: pictures on Yandex-Market do not correspond to the actual set!
I immediately wrote a letter to the plant, tearfully asked ... and they sent it to me. Money, funny, some penny. It is very disappointing that because of such nonsense the manufacturer will lose potential buyers ... There are nozzles on the Ki website (for ordinary and thin sausages-2 types), so solve the problem.

We also bought a Gamma 7-01 combine (thanks a lot to everyone who shared their impressions) I found out about the existence of this device on our forum and I am very happy with my purchase. I checked the miller, even disassembled it, although there is a warning in the instructions that it is not advisable to disassemble it. The millstones are heavy, powerful, everything is done very carefully and thoroughly inside. I set the grinding degree to the very minimum - I decided that I would have it only for cereals and for powdered sugar. I was surprised that the harvester itself turned out to be light and compact (I store the attachments separately), expecting something bulky, like the old Soviet meat grinder of my parents. Loved the shredders. Attachments for manual meat grinders are perfect for this meat grinder, I checked on knives, now I am looking for a sausage attachment that is for manual meat grinders, I think it will fit.I also plan to buy a juicer attachment, while I have not seen it anywhere in our stores. I will not order at the factory, because I don’t want to contact our mail.

.... I also plan to buy a juicer attachment, while I have not seen it anywhere in our stores. I will not order at the factory, because I don’t want to contact our mail.

If, you still need a juicer attachment, that is, here 🔗

Hello! I also have such a combine. I'm happy. Coffee grinds just awesome, powdered sugar, like in a store. Graters are also what you need.

I even have the instructions, but here's the problem, I bought a dishwasher and I don't know if it is possible to wash the attachments in the dishwasher?
Tell me please

I don't risk it.

Girls, on Avito Moscow, sell the 7-01 gamma for 800 rubles, it looks like second-hand, there is a nozzle for sausages in the kit. I was at a loss: I want to, and my husband will not understand .. And I would have dragged her to the dacha ... In general, take whoever needs it, otherwise it will just disappear ... While I am going to my thoughts ... 🔗.

Girls!
And where is the service center of the Gamma meat grinder ?!

And where is the service center of the Gamma meat grinder ?!

Does the Lepse plant produce gamma? Then service centers (by city) can be viewed here 🔗

Hello, please tell me, does the juicer attachment make juice from apples, carrots and oranges?

My tip for statistics ...
Three months after the purchase and infrequent use, the meat grinder stopped turning meat altogether. It looks like the knife is completely dull. I didn’t get there. I put it on the closet for a year. Now in the summer I wrote to the manufacturer, asked to send 2 more knives. The package arrived pretty quickly. Then I will write with a request to send a juicer. The price pleases. But...
I also have a Panasonic meat grinder. In comparison, Gamma has everything flimsy, the metal is softer on the sieve and knife, it oxidizes very strongly, although Panas also has these parts - not stainless steel ... The screw is thinner ...
Even in the same package I ordered a slotted grater nozzle, because after the second use for shredding cabbage, this nozzle fell apart ... And I bought it because of it. Shred cabbage.
In general, in my opinion, cheap and cheerful. After reading good reviews, I decided to support the domestic manufacturer. Now I regret a little, but do not throw it away.
Their good - a coffee mill like it. I began to drink coffee.))

And I dream of buying Gamma here, in Russia, in memory of the one who remained there ... I was happy with everything in her!

[Ukka]

Ukka, so it is on the Internet and on the Lepse website itself in their online store.
I wrote to them yesterday to send a juicer. And another grater for potato pancakes.)

And no one knows, for Gamma there is no dicing grater?

[300]

and looked at Gammu from behind the mill.

I am reading. But it's embarrassing that the rated power of Gamma is 180 watts for the one that is a combine with a bunch of attachments, where there is a mill (I want to grind spices and cereals for bread).

I decided to "play" with Gamma 7-01 ...
I looked for a boo on "Avito" and "Yule", I managed to assemble almost a complete set of 1 (the coveted mill is available) and two motors, one of which is clearly knocking, from parts for 1000 rubles.
Naturally, the plastic turned yellow .....

I tested a meat grinder on a broiler breast, onion and bread (the knife is dull and the grate is dull), and there was no pusher.
I can confirm that the meat grinder sucks in slices of loose broiler breast 4 cm wide and 12 cm long at second speed, but when it starts chopping meat, it does not push, but buzzes louder.

I tested it on a shredder, the shredder turned out to be sharp, carrots can be shredded into Korean carrots, and salted, as it rubs with medium stripes (that is, narrower than on a standard large shredder).
I chopped the cabbage on a slice, cutting for sourdough, I liked that you could chop the second time if you got large pieces during the initial shredding. But if there is experience in the arrangement of cabbage, then there are very few large pieces (a couple of spoons) per 800 gram head.
And the pusher must be careful, otherwise the grater can "chop" it (although it was the same in the other meat grinder)

I will test the mill on herbs, but later, because it was for them that I wanted it (first of all) ...

I'll see in a month how the device works.

I took a boo so as not to pay 3500 for a new one (I was very afraid to be disappointed in the power of 130 watts), I gave it up for everything 300 (meat grinder) with motor+500 (loose motor with shredder, grinder, dough roll for dumplings and can opener)+150(three new bushings)

Added on Tuesday 24 Jan 2017 02:11 PM

And no one knows, for Gamma there is no dicing grater?

It is worth writing to the Lepse plant! What if they there in Kirov come up with a nozzle for cubes ??