Grater Burner (2)

Damn, I stopped by! Here zhezh, eh! I saw Svetka, forgot about everything in the world!
Girls, Muscovites, maybe some of you know, in the Capitol shopping center on Sheremetyevskaya, where Auchan is, is there a Burner store on some floor? I was impatient with Carly's grater (salad grater), but for some reason I didn't take it when I ordered my Profu. Now I'm toiling ...

I read, I read ... It seems that I no longer need V-I will accept. There are many pribluds in it that I cannot find. She turned her gaze to Prima. + It is both cheaper and the most basic thing in it. How do you like it?

Lenochka, thank you !!!
I have a Trend. And I also took it due to the fact that it was possible to buy 1.6 insert additionally!
But he certainly isn't as stable as the Pro!
Okay! You can calm down for now, but I will probably change it in the future!
When there will be no wishlist and it will become boring!

Well, right, Svetul!

Good evening!
Sorry, but you can ask a stupid question, I have been reading the topic for a long time, say in the bushes and bought a Berner, only a classic, because I have never had such happiness.
And in this regard, the question, found an insert called it V-prima, will the classic fit in the set or not?

[Natalia]

, I found an insert called it V-prima, will the classic fit in the kit or not?

Natalia, I'm afraid not.
In general, they have everything cleverly done - there is definitely something missing in each set. And having bought the Classics, you can no longer expect that any inserts from Prima or Trend will fit it.
When I was choosing a shredder for myself (well, this is too loudly said - I chose, rested on one and that's all) I quickly caught these nuances. Everything there is built according to the principle: "If you want to have everything, take two different sets!"

Elena, thank you very much for your answer.
That's because !!!! I thought there would be a catch
I'll have to practice what I have, while I have a lot of waste and everything flies in different directions))))

[kat-rin-ka]

kat-rin-ka, Katya, compatriot, I am cutting daikon. And also a delicious guacomole salad.

I'll have to practice what I have, while I have a lot of waste and everything flies in different directions))))

If everything flies, maybe it makes sense to buy additional vessels? Chesslovo, now I can't imagine my life without him!
The rectangular one fits the Classics. At the expense of waste ... I think you will get used to it and you will have less and less of them. I have practically nothing left, so thin butts from vegetables.

I look at the sudoku with great interest, but I didn't know if I needed it or not. Now I will definitely buy it.
P.S. If it's convenient, you can call me

And having bought the Classics, you can no longer expect that any inserts from Prima or Trend will fit it.

Come on, tell me, gray, Lenka, what are the inserts of Prima and Trend, which are not or are not purchased in addition to the Classics? Unless the shape of the inserts is different, yes! And the thickness of the slicing on the flat insert in the Classic current is two. But insert 1.6 from Classics to Prime will definitely not work!

No, wait ... the man just said he found an insert from Prima. Does it fit the Classics? Yes, it will not work!

Wait, it's not about a specific insert, but about the V-Prima model (I also have one). I'm talking about the fact that in terms of functionality, all inserts are the same. And in form they are not interchangeable.

I look at the sudoku with great interest, but I didn't know if I needed it or not. Now I will definitely buy it.
P.S. If it's convenient, you can call me

How convenient!
Natasha, if you buy in the store, then just for every fireman, take the Classics there and stick it in the vessel to be 100% sure that it will fit. And then if it dangles, then this is not the case.
Although now, probably, girls who have the Classics will either confirm the convenience of this vessel, or refute it. And everything will immediately become clear.

will confirm the convenience of this vessel

Yes confirm. I almost always work with him.

that in terms of functionality, all inserts are the same. And in form they are not interchangeable.

And that's exactly what I meant. I just mixed everything in one post and I got porridge-malasha.

Yes confirm. I almost always work with him.

Actually, yes! Why go far? Lorik is here - she has a FSE!
Lorik, I adore thee!

Ah, well, that's the same! And then, after reading this

And having bought the Classics, you can no longer expect that any inserts from Prima or Trend will fit it

I was surprised - why buy Primov bets for Classics, although everything is the same there?

No, well, only I wanted to write: "Take off your snowflakes, summer is on your nose, they say, you see, I also undressed my face!", And she is already right there - all in smoke and without snowflakes!

Good evening!
Sorry, but you can ask a stupid question, I have been reading the topic for a long time, say in the bushes and bought a Berner, only a classic, because I have never had such happiness.
And in this regard, the question, found an insert called it V-prima, will the classic fit in the set or not?

Natasha, to tell the truth, if I, like you, had read Temka for a long time, I would never have bought the Classic. As it has been written here many times, its quality is not German, and the frame is flimsy in comparison with the same Trend, which is, in fact, an improved Classic. But, perhaps, the reason for the purchase is the cheapness of the Classics, and you can save money for other items. Well, it's your choice. But unfortunately, inserts from other vegetable cutters - Prima, Trend, Pro, are not suitable for it. Only from the Classics are the same as in your kit, if the native insert suddenly breaks or becomes blunt. For the Classic, there is not even an insert-blade for the blades on sale, so you will have to do with only two cutting thicknesses laid on the knifeless insert from the kit.

Tanya, Mona, what is true is true: the current Classics and the first are day and night, or rather the opposite. But this applies equally to all Berner - for some reason the quality deteriorates over the years. As for the purchase of inserts from other models for the Classics: I am again at a loss - why? As well as in bewilderment that he can become blunt. Berner? Is he dull at someone? Definitely a fake! The plug is good, but not the most necessary part in a vegetable cutter. Two thicknesses, of course, are worse than three, but only by one. I repeat, I have VIP, but more often I am strict on the Classics. But there is no wonderful insert 1.6 in Prime!

Berner? Is he dull at someone?

Don't be blunt, bastard! For the second decade he has been plowing and at least henna!
Therefore, my Vipchik is moving to my mother, she really needed it.

Well, yes, any Berner is good, but about getting blunt ... I just don't trust the Classics of today more than the rest of the vegetable cutters .. Because the rest are almost sure that they are made in Germany, but the Classics are not made in Germany now, but they do where something - under a German license. It's good if I'm wrong and with careful handling, the grater will last a long time faithfully. I can only advise (this applies not only to the Classics, but also to other graters and knives - do not wash in hot water. But only in warm or cold water. The blades become dull from hot. You can not believe this, of course, but I believe.

do not wash in hot water. But only warm or cold. Hot blades dull.

It seems to me that the instructions do not advise washing in hot water not for this, but so that the attachment points of plastic and metal do not "loosen up" from heating, since they have different thermal conductivity.

What kind of boiling water should be used to boil them to "loosen up" these very compounds?

Why boiling water? It's just that metal and plastic expand in different ways from heating. But the metal simply does not grow dull from heated water.

Laris, yes I am, being ironic.
And the girl Natasha, it seems, just confused the inserts. They are similar in outlines and an ignorant person can make a mistake.

Natasha, to tell the truth, if I, like you, had read Temka for a long time, I would never have bought the Classic. As it has been written here many times, its quality is not German, and the frame is flimsy in comparison with the same Trend, which is, in fact, an improved Classic. But, perhaps, the reason for the purchase is the cheapness of the Classics, and you can save money for other items. Well, it's your choice. But unfortunately, inserts from other vegetable cutters - Prima, Trend, Pro, are not suitable for it. Only from the Classics are the same as in your kit, if the native insert suddenly breaks or becomes blunt. For the Classic, there is not even an insert-blade for the blades on sale, so you will have to do with only two cutting thicknesses laid on the knifeless insert from the kit.

thanks for the answer
The choice fell on the classic cheapness and I never had a Berner, so if you don't like it, then put it down and forget and not regret it.

Girls! So I have a question! It seems not a beginner, but I can't understand!
There is a stub on Trend! As I understand it, it is for safe storage of the frame!
But somewhere I read that somehow this plug can be cut into slices of medium thickness!
Understood nothing! What is it like???

With her, both sides can be used: one to cover the blades, on the other to plan slices.

Berner? Is he dull at someone?

In my case, it fell apart in due time, but it was not blunt unambiguously. The very first classic to appear in Russia.

Shl. And the prima has 4 slicing thicknesses on a slicer, look. A 1.6mm and not very necessary insert, like 10mm.

Girls! So I have a question! It seems not a beginner, but I cannot understand!
There is a stub on Trend! As I understand it, it is for safe storage of the frame!
But somewhere I read that somehow on this plug you can cut into slices of medium thickness!
Understood nothing! What is it like???

Just flip this insert upside down, insert and rub. Thickness - the average is obtained between the two that are already there.

In my case, it fell apart in due time, but it was not blunt unambiguously. The very first classic to appear in Russia.

Shl. And the prima has 4 slicing thicknesses on a slicer, look. A 1.6mm and not really a necessary insert, like 10mm.

My very first Classics are already closer to 30 years old - as sharp as on the first day! U Primy are not 4 cutting thicknesses, but four insert positions, the fourth - zero, plug, vot. And about the uselessness of 1.6, you can argue to the point of hoarseness, but for many it is irreplaceable.

look. A 1.6mm and not very necessary insert, like 10mm.

I can't agree ... for 10 and only on it I cut apples for strudel - neat long sticks, conveniently fit into the strudel, do not flow / because they are coarsely chopped /, quickly, so I have 10 och in demand

By the way, 10 mm is also a very valuable insert, right, Lena!

! U Primy are not 4 cutting thicknesses, but four insertion positions, the fourth is zero, plug

No, 4 slice thicknesses and 5th position - plug.

[Marina]

Marina, Tanya, girls, thanks !!!
Then you have to order, I don't have this !!!
And I thought, why do I need a stub ..... here's a cluck .....

No, 4 slice thicknesses and 5th position - plug.

This means that we have different Prims. I have a VIP-4

[Seven-year plan]

Seven-year plan, Sveta, Tanya-Mona1 instructed me when buying my Trend, and all the rest of the Burners that I have. Only here is the Combi-Chef - I chose the Compound myself, but so far I have nothing to do with it. Well, okay, Schaub boo!

[Marina]

Marina, and Tanya-Mona1 also instructed me when buying my Trend, for which many thanks to her! I have never regretted this purchase.

VIP is the previous model, Prima is still the last one, and it has a different markup.

No matter what model we take, they are not interchangeable, and the inserts and graters for cutting are almost the same. Insert 1.6 I use for slicing onions into minced meat, insert 10 I use for cutting potatoes for frying, 7 I use for potatoes for soup, the most popular is 3.5-I cut carrots, beets, onions for everything. I like everything. I cut cabbage on a thin insert without a knife, cook boiled vegetables on a Pizza-grater. Honestly, I don't understand Wafelka, where can I go? I probably have a Trend-Decor, it seems to me that the thickness is large there, and in general I don't understand why everyone is praising it, I took it, but I won't find an application. I also want to take a Korean one. There is Curly, I make a salad of raw vegetables - the width is unusual, but I like it

I don't understand the waffle, where can I go?

I use it to cut potatoes for an air fryer. And vegetables to decorate salads.

Thanks, I'll keep it in mind

Honestly, I don't understand Wafelka, where can I go?

Oh-oh-oh, how can you? Favorite decorator!

Laris, well, where is such beauty?

[marinastom]

marinastom, gala10, girls, well, what is it, I immediately felt like an ancient aksakal. "We've been sitting here for a long time," as in "The White Sun of the Desert."

[mowgli]

mowgliNatasha, well, how is it - where? Go to food! Potatoes for the air-fryer, carrots for stews and soup, cucumbers for garnish. After all, it is so prettier, which means it is more appetizing! The waffle is constantly in use, I love it dearly!

[dopleta]

dopleta, truncated! At the first opportunity, I buy !!!

Please tell me on the Berner's website there is no possibility of "cash on delivery", were there any misunderstandings. It turns out only an advance payment through the online store, there is no way to purchase by courier. I really wanted to buy