Grater Burner (2)

Monich, I have Roko. The carrot is a bit heavy on it in length. And I have already become addicted to carrots. I'll try 1.6 - maybe it will go easier. I no longer need a runoff, the carrot itself. Well, if 1.6 is not easier than on Roko, then there will be another felt in the house. I have few of them, you panim

Tan, all this can be said in short: Shob bulo.

Tan, all this can be said in short: Shob bulo.

That otozh I painfully want a pizza-grater, but I hit myself on the hands: Carlos will rub the same cheese no worse, and even prettier. So far, fatite is 1.6 mm, but there is a boom to see

That otozh I painfully want a pizza-grater, but I hit myself on the hands: Carlos will rub the same cheese no worse, and even prettier. So far, fatite is 1.6 mm, but there is a boom to see

And pizza grater is cheap. Take it at once in one go. And then you will dream until you buy it.

I read the whole topic until I got to page 58. Tell me, but carrots for frying, what graters are you rubbing, by Berner or others?

[Tan]

Tan, from and carrots and onions for 1.6 grated (hopefully seen)

Annushka, fried carrots on a 3.5mm insert - a sweet deal!
Mon, it's not about cheapness, it's about necessity. Will lie dead weight, I know from myself. 1.6 may come in handy, maybe not, but the pizza will be a lot, because it practically duplicates the more expensive (and more functional for me) Carlos.
And if the shop was just lying around - so I'll buy another pressure cooker. The current space for felting will require more, of course, than for a pizza-grater Eh, who would I pistons inserted Dohtur set his brains in place, where you are, I'm tired of waiting for you

I read the whole topic until I got to page 58. Tell me, but carrots for frying, what graters are you rubbing, by Berner or others?

I'm on Roco Tru, I don't have insert 1.6. And here is Ksyushino's photo from above. There is a carrot on the 1.6 insert. And I make onions for frying on insert 3.5. At 1.6 too much it grinds into porridge, burns quickly.

Ksun, what are your carrots in wide thin slices? I still wait for thin straws from her for carrots. Duc sho, it's not for me, is it coming out? So Monk's rights are pizza-grater beams want?
No, you tell me. This hto called me yesterday, they say, I confuse people's minds, put them into a stupor? And hto just turned on my oscillation? Right now, IRRka will come running - again it will start to swear that I have shaken everyone here

Ksun, what are your carrots in wide thin slices?

Why? There are tonesinki sticks. True, not all are uniform, but sticks, such as straws. There are no tama records

And to me they look flat, but rather wide. I forgot - do you have a Trend or Prima? In Prima, swoop I remember, there are two positions on each width: thinner and thicker. Mabut, because of this?

Xun, do you have Roko? And what do you like more - her or 1.6? Mine needs something, tell me!

fried carrots on a 3.5mm insert - a sweet deal!

I need to fry everything for a long time. But for a stew, meat with vegetables, yes, only 3.5.

I'm on Roco Tru, I don't have insert 1.6. And here is Ksyushino's photo from above. There is a carrot on the 1.6 insert. And I make onions for frying on insert 3.5. At 1.6 too much it grinds into porridge, burns quickly.

And I’m not just 1.6 for the soup. Then I fry no more than 3 minutes, until soft.

And to me they look flat, but rather wide. I forgot - do you have a Trend or Prima? In Prima, swoop I remember, there are two positions on each width: thinner and thicker. Mabut, because of this?

I have a Trend.And the wide ones probably because of the sho kada you rub, they fall stuck together in the basket, so they fall in a straight layer. And I didn't stir them up to fry them.

Xun, do you have Roko? And what do you like more - her or 1.6? Mine needs something, tell me!

There is also Roco. But it is more convenient for me, perhaps even easier, in terms of less force I have to apply, shuffle on insert 1.6. Then Roko's hands hurt, the carrot goes taut.

Ksun, what are your carrots in wide thin slices? I'm waiting for thin straws from her for carrots. Duc sho, it's not for me, is it coming out? It turns out Monk's rights - the rays of the pizza-grater want?

No, Tan, there are no cubes in the pizza-grateer, there are noodles so flat with a width of about 4-5 mm. I cut the cheese with it on the chicken on top, when I bake it or when I need to crush a few tomatoes into mashed potatoes, and the skins so that they remain unused. So the grater is necessary for me.
Again, many make a herring coat on her. Boiled vegetables do not stick to it, it is plastic.

In! It means that I am not the only one with carrots on Roko. She's prettier, no doubt about it, but the pens are noncomilfo
Ksyunya, are you doing a carrot? If so, do you rub on Rock or 1.6?
Monychko, I'm trying on pizza not for the sake of carrots, but for the sake of excitement. And then I'll take and get both!
Figurines! It's not mine, I'll save on a pressure cooker. IRRka told me, now I am obliged to buy Deksik, the shop people, through my fault hid in the bushes, came out white

Ksyunya, are you doing a carrot? If so, do you rub on Rock or 1.6?

Korean? On Roco. Well it is prettier and more square (equilateral) straw comes out. And for every day in the soup there or somewhere else, then by 1.6.

It's not mine, I'll save on a pressure cooker. IRRka told me, now I am obliged to buy Deksik, the shop people, through my fault hid in the bushes, came out white

Well, she’s special, so you don’t hesitate.

Korean? On Roco. Well it is prettier and more square (equilateral) straw comes out. And for every day in the soup there or somewhere else, then by 1.6.

Yeah, so the loin 1.6 won't fountain? Well, nafik is she tada to me? I'm 3.5 for frying just right, I don't like smaller ones.

Well, she’s special, so you don’t hesitate.

Do you think? That is not. My vibrations will reach her equally anywhere

Yeah, so the loin 1.6 won't fountain? H

Yes, no, normul turns out. If the issue of visual aesthetics is not in the first place. Although Roco does not always walk smoothly. It depends on the strength of the hands. My hands are weak, nada is easier for me.

Yeah, so the loin 1.6 won't fountain? Well, nafik is she tada me? I'm 3.5 for frying just right, I don't like smaller ones.

Well, you see, and Roco is worth 2 Pizza graters. Well, sho, can I seduce?

Well, you see, and Roco is worth 2 Pizza graters. Well, sho, can I seduce?

You are not comparing the prices! The question is between 1.6 (75 UAH) and pizza (60 UAH). The difference is not great.

You are not comparing the prices! The question is between 1.6 (75 UAH) and pizza (60 UAH). The difference is not great.

And it's still cheaper!

Well, you can argue with this figs. But the difference is not critical to be guided by.

Well, you can argue with this figs. But the difference is not critical to be guided by.

Do you remember when I once uploaded a photo of my Chinese grater with several replaceable attachments? I don’t give Borner to my husband, he’s rubbing that carrot for pilaf. So, it is just 15 UAH. worth it. And right now, the most needed nozzle has broken on it and I need to buy a new grater. Only now 15 UAH are superfluous right now. You all know where I'm going right now. So this difference is not so sometimes and not critical.

I already bought one wooden one for the loin - I immediately sent it to the trash. No, fatite!

I read all the pages, yes, it's hard to choose between Prima and Trend, when I didn't see them in my eyes, these knives, inserts, millimeters.I mainly need it for cutting onions into cubes for frying, I do a lot of it at once. And potatoes for stewing, baking in a slow cooker. So I think, can I just buy a Combichipser with a fruit holder, he also cuts onions into cubes and potatoes into cubes, carrots into pilaf? Although cabbage will soon ferment. At first I wanted Trend, but I didn't find something where I could buy so that the plug was available, I want it right away. Then I read about the Nisers and got confused. It seems that Irr has a Combichipper, tell me.

I did not find where to buy so that the plug was available, I want it right away.

A trend immediately with a cap is a Pro, but it is much more expensive, because in a metal guise. I bought a Trend with additional attachments for 1.6 and 10 mm + a cap + a classic sudok + multibox + a box for inserts + Rocko + Carly + Waffle and is still cheaper than the Pro. And it doesn't even matter that I didn't buy everything at once, but for several years. Now on the off-site I calculated my entire set - it is more expensive than the Pro by only $ 8 (255 rubles). And in Ukraine it is even cheaper, the girls gave prices - they compared them.
But I won't tell you about the combichipser, I don't have it.

[annnushka27]

annnushka27 If the presence of insert 1.6 is not critical for you, buy Prima) Plug, 4 cutting thicknesses for knifeless, cubes, inserts for 7 and 3.5 have 2 positions ... * I'm tempted, yes * And insert 1.6 can be compensated by the second position inserts 3.5 or Roco grater)

[annnushka27]

annnushka27 If the presence of insert 1.6 is not critical for you, buy Prima) Plug, 4 cutting thicknesses for knifeless, cubes, inserts for 7 and 3.5 have 2 positions ... * I'm tempted, yes * And insert 1.6 can be compensated by the second position inserts 3.5 or Roco grater)

1.6 is it the thinnest? It's just that I don't know much about mm, the ruler is already next to the computer, I read about the next insert and look at the size of the ruler.

Yes, 1.6 mm is the thinnest cut in bars - straws.

I wonder if it's scary to order at Kidstaff, what if it's a fake? Has anyone ordered here? 🔗

I thought of taking the Trend, but I was looking for the plug to be available right away. Found only here 🔗
What do you think? Like an official representative.
Sorry for the long time, I just want to enjoy the purchase later.

Ksyunya, I remember right away, do you have a multibox for Trend? A question for filling: if you DO NOT put the main frame into it, but stick a couple of separate graters plus one or two inserts - will they enter? Let's say waffle + pizza + 10 + knifeless? And it would be nice to stick another 1.6. Will I shove? The holder does not have to push there.

Anyuta, it's right that you are asking questions. Until the graters are held in your hands, it is difficult to navigate what is what and what is more convenient for your hands.
With such a list of goods, STOD simply cannot have counterfeits. But do they work? I probably don’t remember, so I’m not going to argue, but six months ago, when I was picking up a purchase for myself, some point rich in choice was only listed on the internet, but in real life I could not find it. Contact them. If they are still on the market, I think it is quite possible to order from them, you will not find prices lower, they have recommended prices, that is, sellers cannot set prices below this level.

Anyuta, it's right that you are asking questions. Until the graters are held in your hands, it is difficult to navigate what is what and what is more convenient for your hands.
With such a list of goods, STOD simply cannot have counterfeits. But do they work? I probably don’t remember, so I’m not going to argue, but six months ago, when I was picking up a purchase for myself, some point rich in choice was only listed on the internet, but in real life I could not find it. Contact them. If they are still on the market, I think it is quite possible to order from them, you will not find prices lower, they have recommended prices, that is, sellers cannot set prices below this level.

I called up already, of course, they said everything is there, for safety reasons I want to order cash on delivery.
Thanks for the support.

So that's great! Order safely.There are two customer reviews on the site, read (at the very top of the page). The girls took it, they are happy.
Usually, you can run into a fake where there is a very meager choice. And here is almost all of Berner's products

[Tanyush]

Ksyunya, I remember right away, do you have a multibox for Trend? A question for filling: if you DO NOT put the main frame into it, but stick a couple of separate graters plus one or two inserts - will they enter? Let's say waffle + pizza + 10 + knifeless? And it would be nice to stick another 1.6. Will I shove? The holder does not have to push there.

Tanyush, I poke a mustache as you write. Just ask you to wait a little. Small restless, does not sit still. I almost fell off my chair. because to calm down, I will check everything carefully and write. OK?

I want a basic set + plug + insert 1.6 + insert 10 What else? Sudochk? What is it called correctly? And the peelers are really not very good? I have the usual, cheapest one, it seems to suit me.
Also while I was writing, the whole kitchen is strewn with cookies, the little one and the dog are having fun.

Annushka, don't take the peeler, unless it's really good for oranges. But as for me - it's expensive for oranges.
I have a gorgeous all-metal cleaner for 136 UAH, which I am super-happy with, and recently I could not pass by the most simple, obscenely cheap such cleaner
It's incredible, but the cleaner turned out to be awesome !!! Eggplant cleans better than my dear, while other eggplant cleaners are almost too tough. And besides cleaning vegetables, this little thing perfectly cleans ... fish !!! I have long wanted to tell about her here, but everything was not up to that. And then by the way I had to.
And I will share my experience about the dish. It certainly comes in handy when cutting in small quantities. But it's not uncommon for me to have large portions. Therefore, I no longer use my basin. I now have a very spacious cutting board, so it turned out to be more convenient for me to cut right on it. But in principle, the basin is really comfortable

I want a basic set + plug + insert 1.6 + insert 10 What else?

Does winter cabbage take up a lot of space on your menu? And most importantly, in what form? If in the form of fresh salads, I highly recommend Carly. She is dear, an infection, but without her it would be bad for me. In general, for myself, I consider its price more than justified.
They say the pizza grater is very good (I plan to try it on my own in the near future).

Just about I have exactly the same, only a maniac color. I bought it at the market. I also really like it, maybe because there is nothing to compare.

No! As I say, I have an expensive cleaner, I have already written about it in detail. And she's absolutely gorgeous. I will not say that it is inferior or superior to this cheapest one, they are just different (cheap with a serrated edge, expensive with a smooth one, so they cut differently), but they are both surprisingly good!

And I really like the Berner vegetable peeler (y) Yes, it's a little expensive for an ordinary one, but I can't peel it with anything else. But the one in the photo is owned by my parents, and when I cook with them, it doesn't suit me, doesn't fit in my hand, and my dad, on the contrary, doesn't like mine. So, to each his own

OK, dear! I still don't order anything yet. I estimate the current. Trying to distract myself from sad thoughts.

And everything fits in my multi-box.

And everything fits in my multi-box.

Monchik, I remember about your multi-box. But I need something very, very compact, so that it doesn't get in the way. The dytynka came to comfort us and caught fire with a grater. So I am looking for the best solution for her both in terms of equipment and placement.

[azaza, Tanyusha]

azaza, Tanyusha
Have you already held a seminar with your daughter on the safety of this special Sharp device?

[azaza, Tanyusha]

azaza, Tanyusha
Have you already held a seminar with your daughter on the safety of this special Sharp device?

No, I didn’t have time yet - it was only yesterday evening that the Seminar was ahead, but it is inevitable !!!

[Tanya]

Tanya and so, let's go.I have documented everything
I don't have pizza, but I have Roko and Krali. They can be inserted into a multibox only facing backwards - to the insertion cells. otherwise not included.
Carly

Roco


For any of them, you can insert a bladeless

Or a stub

But 10 mm and 1.6 mm also fit, if you put them with their "nose" down, then to get it out - not to cut yourself.

Inserts for inserts freely accommodate inserts of 10 and 1.6 mm (i.e. both additional inserts)


And by putting, for example, a ten (by 10 mm) with knives again back (not towards the main compartment), then you can stick on it (ten) at least a knifeless insert, at least a plug (and any other can stand as I showed above)
Without knife insert

Plug

And this design is pretty stable.

But I managed to stick the waffle only like this

But so she dangles as you know what and where. But it is quite possible to keep it that way.

Well, in general, in the end, in the multibox at the same time I was able to push: Rocko (or Carly) + 10 mm + 1.6 mm + knifeless + stub.

If something is not clear (and sorry for the quality of the photo, I quickly clicked) call write ask.

Ksyushik, thanks !!! The current is not nata to me for Roko and Carly (by the way, are they not included together? They fit well on each other), I nata there Pizza plus Waffle. One waffle dangles like a pencil in a glass (oh, how delicate I am), and what about pizza? She's smaller than Carlos and Roco? And if two of them are stuck together in a large compartment? There are no questions with small for stubs: ten and 1.6 are what you need. Do you have a pizza grater yum? If there is, please try to stick the waffle and pizza together.

Ay-yay-yay, Tanya, don't you read carefully

I have no pizza

Pizza, which is classic - smaller, and which Trend is the same size as Roco (Carly). Both of them (Roko + Carly) only climb up to the level of knives, then they do not puff and then taste a little tough.

I tried to fold Rocko (Carly) and the waffle - they don't. Spit everything. Whoever has Pizza and waffle and multibox, you need to ask them for a drink, maybe they will pass. In my combination - no.