Unit pressure cooker rolls around the table like clockwork

I wrote to two moderators yesterday, but did not receive an answer. Unit 1010D pressure cooker users, please tell me, do you have rubber feet on the bottom (outer)? The fact is that I put mine on the table, and she rolls on it like clockwork. Yes, this is not surprising, since there is no adhesion to the tabletop and the plastic slides on it very much. And there are grooves for rubber feet. I called Auchan, they said that the one at the exhibition also had empty recesses.

moderator's note: there is no need to write to the moderators in PM on such issues, ask directly on the forum

moderated If this is not so, who is not difficult, tell me HOW. You, as I understand it, do not want me to answer this simple question either? Where I bought the pressure cooker, I called. They said that there was a pressure cooker without rubber bands in the window. But this is AUCHAN, and there can be anything you want. And for me to open a new pressure cooker to see if there are rubber bands: spiteful: or not, no one will be honored ... The question was for the users of the UNIT 1010D model!

Who bought it - that's where you need to ask.

And the fact that I called Auchan is not enough?

I wrote to two moderators yesterday, but did not receive an answer. Unit 1010D pressure cooker users, please tell me, do you have rubber feet on the bottom (outer)? The fact is that I put mine on the table, and she rolls on it like clockwork. Yes, this is not surprising, since there is no adhesion to the tabletop and the plastic slides on it very much. And there are grooves for rubber feet. I called Auchan, they said that the one at the exhibition also had empty recesses.

Buy the self-adhesive plastic feet separately. Look for furniture fittings or the basement radio market.

Here is the sequence that preceded the visit to your site. Googled all google. The bottom of the photographed pressure cooker is not found anywhere on the Internet. Has anyone seen it? There is still no answer from the off-site of the device (and I think that there will not be) and I have already congratulated myself on such support from the manufacturer. I called Auchan.
Yes, maybe out of habit (comparing moderation from other sites) I wanted a lot, but now this is understandable (which is a lot)
So, your site has become the last hope to find out how things are with my question from UNIT1010 users.

Buy the self-adhesive plastic feet separately. Look for furniture fittings or the basement radio market.

Well, about the furniture headset still all right, but what does the radio market in the basement have to do with it? Or is it humor like that? Congratulations...
Somehow you begin to respect Russians with renewed vigor. They forget to put something important in the box with the goods, but we always turn on the Kulibins and spit on these problems. I myself have more than once bought eccentrics for furniture, screws and bolts, veneer, and only because I am ashamed and broke to go to the other end of the city for such trifles. And they use it! And once I said to myself, stop going to the radio markets in the basement, and sometimes give a shake-up to these brothers who did not report there, overlooked there, they sold an illiquid product ... but everything we have is so trifling ... please forgive me for this offtopic ...

And you try to call any other store where they are sold and ask the seller for a complete set, maybe they will prompt you there.

Yes, in our city (judging by the Yandex-market) there are not so many of them (Units). In general, I was aiming to buy Redmond 4504, but then (by chance) I came across this one, and I decided, so to speak, to save some money ... Okay, thank you all for your participation, otherwise everyone is tired of these rubber bands ...

Well, about the furniture headset still all right, but what does the radio market in the basement have to do with it? Or is it humor like that? Congratulations...

no humor. It's just in the workshops (apparently, there was a typo - not a radio market, but a radio workshop) that you can try to find anti-slip rubber blotches - they are often additionally glued to TVs, receivers, music. centers, etc.

Especially for you, I looked at the bottom of my LandLife, which is quite possibly riveted in the same factory as the unit - there are no rubber blotches. There are "legs" with pimples along the perimeter, but they are made of the same plastic.

P.S. If, for example, I am a moderator in the multicooker section, this does not mean at all that I am the owner of each of the models discussed in the section. My kitchen is not that big, and there are not so many mouths in the family.

P.P.S. To solve the problem of sliding technology on the table surface, I can advise you to purchase silicone baking mat and put a pressure cooker on it. In any case, this is how I solved the issue with my bread maker.

Itself one of these days in Auchan bought the same unit1010. There is nothing on the legs (well, in the sense of rubber bands), but he does not roll on the table either. And now it stands on the ceramic plate, also rooted to the spot. In it is weight-mother dear !!

There are no rubber feet on UNIT, but there are plastic pads in the pimple - I looked especially for you

no humor. It's just in the workshops (apparently, there was a typo - not a radio market, but a radio workshop) that you can try to find anti-slip rubber blotches - they are often additionally glued to TVs, receivers, music. centers, etc.

Especially for you, I looked at the bottom of my LandLife, which is quite possibly riveted in the same factory as the unit - there are no rubber blotches. There are "legs" with pimples along the perimeter, but they are made of the same plastic. More details: https://Mcooker-enn.tomathouse.com/in...on=com_smf&topic=167903.0

Thank you for the clarification. Of course, I understood what this was about. I myself (I repeat) kulibnich for any reason, thanks to our and not our industry. Didn't know that there are very few owners of this pressure cooker or they rarely visit this site. I repeat that, by analogy with other sites, I thought that the moderators in the topic at least at the end of the day check the mail on the sponsored site and at least have the model that they are the moderators of the topic about.
And I have this plastic on the tabletop like on ice ... already, of course, put the rubber bands, but how did the manufacturer imagine THIS without adhesion to the table? It's a pot of boiling water ...

Itself one of these days in Auchan bought the same unit1010. There is nothing on the legs (well, in the sense of rubber bands), but he does not roll on the table either. And now it stands on the ceramic plate, also rooted to the spot. In it is weight-mother dear !!

And how does a nut user have overlays?

There are no rubber feet on UNIT, but there are plastic pads in the pimple - I looked especially for you

Thank you briefly and clearly.

[Unit]

Unit , I'm wildly sorry, but at the bottom there are no lining, but something like legs in a semicircle with pimples - that's for you to see

And how does a nut user have overlays?

And I have not such, I have 4 of them, also in a semicircle, probably 10 centimeters. And nakreki in the center, that this unit is not present-straight Chinese China !!

And I have not such, I have 4 of them, also in a semicircle, probably 10 centimeters. And nakreki in the center, that this unit is not present-straight Chinese China !!

I can't insert a photo. As I understand it, you need to press additional functions. I press, nothing happens to me ...

Thanks to everyone who responded. The topic can be deleted.

Dear moderators! As I did not figure out how to upload photos here, I still don’t know how to delete my themes. Or is it enough to block it? My theme has a very scary name ...

[How to insert a photo into your message]

Normal name, no need to delete it. Suddenly someone will have the same questions.
How to insert a photo into your message

[How to insert a photo into your message]

Normal name, no need to delete it.Suddenly someone will have the same questions.
How to insert a photo into your message

Thanks a lot for the link. As for the topic ... It has not yet been fully clarified whether my equipment is standard or not. Everything is complicated, as I understand it, by the fact that the pressure cooker I bought or is not as popular as many others (everyone already knows these brands) I, for example, need to take only two steps from home to examine in great detail any of these brands, and to look at Unit once again, you have to go to the other end of the city. Something like this...

I have a Brand, and also no silicone on the legs. At first it strained, then quickly adapted and stopped noticing. But all the same I will buy overlays.

I can't help asking everyone who reads it. Here you cooked the soup. And what, for storage, you need to pour it into a separate pan? Somewhere at the very beginning of the thought of buying a pressure cooker I read that nothing can be stored in your own saucepan. Although, why not ... The usual, after all, Teflon saucepan. Yes, and why I leaned towards Redmon, because they produce pots with ceramic coating. And to others?

I'm pouring. I need SV all the time. And I think it is possible to store, otherwise why do the heating up to 13 hours (this is probably in all SVs).

I'm pouring. I need SV all the time. And I think it is possible to store, otherwise why do the heating up to 13 hours (this is probably in all SVs).

Basically, I mean refrigerated storage.
Owl? :) As I understand it, it is deep night in Nizhnevartovsk ...

I'm pouring. I need SV all the time.

It's the same for me, Yunyushka 10 is always at work.

What about the refrigerator unit , then I would be right in this saucepan and put it, only after cooling it down. Although why in the refrigerator, as I correctly noted Pogremushka this miracle technique has heating for 13 hours, as they say, do not pull the plug out of the socket and for 13 hours you have hot soup! Opened - ate - closed!

I wrote to two moderators yesterday, but did not receive an answer.moderator's note: there is no need to write to the moderators in a personal message on such issues, ask immediately on the forum

One moderator answers
I do not have this saucepan!
I use MV Panasonic and Cuckoo, and these sections are only moderated

It's the same for me, Yunyushka 10 is always at work.

What about the refrigerator unit , then I would be right in this saucepan and put it, only after cooling it down. Although why in the refrigerator, as I correctly noted Pogremushka this miracle technique has heating for 13 hours, as they say, do not pull the plug out of the socket and for 13 hours you have hot soup! Opened - ate - closed!

Did you not notice (if you keep food on the heating constantly) how much the power consumption has increased? Logically, probably a lot ... and the soup (I'm really an amateur in cooking) can be overcooked, perhaps ... or am I wrong? although there is not much to hide there. If for two, then soup for two passes.

Owl? :) As I understand it, it is deep night in Nizhnevartovsk ...

Yeah, I like to chat at the Bread Maker when the family is already asleep. We live by GMT + 5, Moscow +2 hours.

Although why in the refrigerator, as I correctly noted Pogremushka this miracle technique has heating for 13 hours, as they say, do not pull the plug out of the socket and for 13 hours you have hot soup! Opened - ate - closed!

I didn't really mean it. Since the manufacturer has foreseen the possibility of keeping the dish hot for such a long time, and hence the contact of food with the pan, it means that there should be no harm to either the food or the pan from storing in the same container. In any case, I would like to hope that this is also taken care of.

Hello! This is the first acquaintance with Unit. I decided to prepare a pressure cooker before my wife arrived. The mind was enough for that. that it is necessary at least to boil water with lemon juice (somewhere I heard that it is necessary to boil a lemon for the first time) I pour the floor of a pot of water. I bet on porridge, minus one minute (to check if the time uv / mind works).After 5 minutes, steam was poured out of it. I waited about 15 minutes, I think, and what kind of porridge would I have? Picked it up and turned it off until all the steam came out. What did I do wrong?

By the way, can I write in the wrong place and ask in the wrong place? Maybe there is a separate topic for dummies for us?

You just haven't closed the valve. There are two positions - to close the valve, it must be turned by the letter "Airproof" to a small ledge.

You just haven't closed the valve. There are two positions - to close the valve, it must be turned by the letter "Airproof" to a small ledge.

And so he did. I put a small ledge on Airproof (as in the instructions) ...

Or maybe you need to turn the valve on the contrary, there in the figure it looks like some other model (at least the lid looks different)

Hello! This is the first acquaintance with Unit. I decided to prepare a pressure cooker before my wife arrived. The mind was enough for that. that it is necessary at least to boil water with lemon juice (somewhere I heard that it is necessary to boil a lemon for the first time) I pour the floor of a pot of water. I bet on porridge, minus one minute (to check if the time uv / mind works). After 5 minutes, steam was poured out of it. I waited about 15 minutes, I think, and what kind of porridge would I have? Picked it up and turned it off until all the steam came out. What did I do wrong?

Good evening. Do you have a Touch Control Unit? I used this pressure cooker for a whole year without much enthusiasm, until some minor malfunction happened, in general, they fixed something for me there for 300 rubles and asked how I use it, as it turned out, I did NOT use it correctly, although at first with the master in the service, she argued and argued that he did not know how to use the pressure cooker correctly
in general, as I understand it, you have a similar problem, apparently a crooked instruction.
when you start cooking, you put the valve in a certain position, the pressure cooker starts to boil, you need to wait, well, maybe a minute and turn the valve to the second position (it seemed strange to me, I argued with the master about this), and then the pressure cooker stops hissing wildly, gains the required pressure and the countdown begins and it turns off as expected and goes into heating mode. I also bought an outlet with a timer, because if you leave the house for a while, not every dish can be heated for a long time and the timer on the outlet works and the pressure cooker turns off completely.
I hope I helped you
if anything, my skype is nat-spirina. if not online - write a message, we will call you

[🔗]

Are we talking about this beauty?
🔗
If this one is a link to the official site, there is an instruction there.

She ... something slait didn't make me happy ...

no, my model is not my USP 1000D /

unit:

She ... something slait didn't make me happy ...

Go to their website, read the instructions - maybe you can figure it out.

She ... something slait didn't make me happy ...

uh, so I seemed to be trying to cheer you on the contrary, maybe I just wrote something incomprehensible? ask

Go to their website, read the instructions - maybe you can figure it out.

I already figured it out, albeit by chance the master in the service explained everything.

Immediately on the offsite and rushed after the purchase. There is a link to the instruction, and you press on it, there is one steam from the steamer Unit: crazy: I will write to the user-owner Akya. She seems to have the same ...

Oh "k. Although I think the principle of their work is the same, they only changed their appearance
but about the breakdown, I just wrote by the way, since it was the master in the service who pointed out my mistake in using the pressure cooker

Is it something scary to turn the valve at work ... or is it okay? Just in my case, as soon as it starts to hiss strongly, try to turn it around to silence the hiss ...? I already want to take this pressure cooker back

Do you also have a removable lid on the lid? Is she standing right?

no need to take it back, do not be afraid to turn the valve to the second position - and you will be happy that this moment was explained to me by the master, but I did not believe him - I argued with him, because I do not have information about this moment in the instructions.
exactly when you turn the valve, the pressure cooker will pick up the required pressure and the time will start
Believe and check, for a whole year I could not figure out that the valve just needs to be turned and that's it.
I didn’t come up with it, the master explained to me in the service, who repairs the pressure cooker and above you explained the same good luck !!

Of course, here I looked carefully ... and if there was no vacuum, then steam would have flowed from all the cracks ... I think so ...

Right now, girls (sorry for the familiarity) I'll try ...

do not twist anything. Immediately, the maximum pressure valve () rotating round) must be set to the "airproof" position when you close the pressure cooker with a lid. Rather, they first closed the lid and immediately turned the valve. Simply, a small valve (the bypass valve is slightly recessed in the lid of the figurine) lets steam through until it is supported underneath with sufficient force. Then it slams shut and the pressure cooker starts to build up pressure.

Climbing to a working boiling pressure cooker is actually dangerous, there a strong stream of steam can overflow.

Actually, the recommendation of the master regarding the electric pressure cooker is at least strange. This is the saucepan that itself cooks. What for, excuse me, then she has a delay in starting? What else would I set an alarm for myself when to come up and turn the valve? Illogical