Blender

[Ksyushk @ -Plushk @]

Ksyushk @ -Plushk @, did you accidentally hit the cover or what? How could something fly off?

The fact of the matter is that it did not hit. I washed it very carefully and wiped it off. My daughter asked to be an assistant, did not allow her, she did everything herself. That's why I don't know how it happened. I didn’t sleep at night, I kept thinking, the milk began to decrease. I decided not to ruffle my nerves, I will try to fix it and I fixed it. But I will order a new cover, then, somehow ... it works. The husband will come, we can still do something sensible.

The fact of the matter is that it did not hit. I washed it very carefully and wiped it off. My daughter asked to be an assistant, did not allow her, she did everything herself. That's why I don't know how it happened. I didn’t sleep at night, I kept thinking, the milk began to decrease. I decided not to ruffle my nerves, I will try to fix it and I fixed it. But I will order a new cover, then, somehow ... it works. The husband will come, we can still do something sensible.

And you can have a photo of how exactly it broke and how it was repaired, it will suddenly come in handy.

That's what broke off.

Judging by the pictures, again drawn, from the instructions, quite a lot has fallen off. But I did not find any pieces of plastic either in the sink or on the floor. Now in the photo I have already considered that there is still a crack. Maybe he has already come to me. I do not know. And I don’t want to figure it out anymore. Already today, Markovka has rubbed a whole bowl. It works and okay. For that kind of money, it’s good that it’s not paper.
Here's how I slipped a toothpick so that the flag fuse.

If you haven't thrown away the combine box, look for this plastic part in it. If it is in a box, then they brought it already broken
In the presence of the courier, I reviewed all the details, checked the working capacity of the combine and blender, and only then gave the money. The courier said that for the first time he saw that the goods were checked so meticulously upon delivery

I'm so meticulous myself. This time a small one arrived, all so nervous. My child and burst into tears, seeing the uncle, I let him down from my hands to review everything, and he was a beluga. Okay, I think, to hell with him, I quickly checked the completeness and gave the money, signed it. I drove the blender away that evening, but the harvester did not become (what is that?). Yesterday I decided. I rummaged through the box, there is no debris. Yes, and I already slept with it the night and calmed down. My nerves are dearer to me, and I also need milk so that it doesn't go to waste. My husband won't be at home for another week, and he's still working. Now I crumbled the onion for the soup. And this is the main thing. We now have half of the equipment "completed" after the purchase.

The pimp on the lid is like this

It works and okay, I still didn't have enough nerves to spoil myself because of household appliances Well done, that they guessed to adapt a toothpick to unlock the engine, I would not have thought of that.
Today I made chicken terrine with the help of a food processor and dough for oatmeal cookies. I am very happy, because there is a minimum of effort, and the result is excellent.


And Brown did not make bread with crusts on crumbs, no matter how hard he tried. I had to use a glass blender from the Bosch combine, he did everything in ten seconds

[Daffi]

Daffi,
and terrine is something like a pate?
Is it convenient to do it in a blender bowl or with your foot?

[Daffi]

Daffi, mmmm !!!! Handsomely!!!

Daffi,
and terrine is something like a pate?
Is it convenient to do it in a blender bowl or with your foot?

Yeah, and I'm wondering what it is and how to do it? Looks delicious! Can you have a recipe for cookies too?

Terrine is something like meat bread, I cut it and put it on sandwiches instead of sausage. The recipe is approximate, because I do everything "by eye".
Chicken fillet without skin and bones (700-900 g), 1 egg, salt, pepper, spices to taste, a few cloves of garlic, milk 1/2 tbsp.Today, in addition to the minced meat, I added a couple of slices of white bread soaked in milk. Grind everything like minced meat into cutlets, mix, add milk to make it a little juicier.
I line the terrine mold with foil, grease it with vegetable oil, spread the minced meat, level the top with wet hands. You can sprinkle with paprika, then put pieces of crushed paprika and a little sprinkle with sesame seeds. But you can not sprinkle anything at all, it does not affect the taste, only beauty
Cover the form with the terrine with a sheet of foil and put on a baking sheet with sides, pour water into the baking sheet. It’s supposed to pour water up to half the height of the terrine mold, but I don’t do that. Bake until tender at 180-200 degrees. When the delicious smell has gone and the terrine has already "grabbed" in appearance, I remove the top sheet of foil and stick in the thermometer for baking the meat, put everything back into the oven until the thermometer is 92 degrees. Then the form with the terrine can be removed from the oven and allowed to stand so that all the liquid is absorbed into the terrine. Cool slightly, turn onto a plate, remove the foil and turn over again, upside down on a plate to store in the refrigerator. Before putting it in the refrigerator, I cover the terrine with cling film so that it doesn't dry out.

[Daffi]

Daffi
Is there a special form for him?

I also made oatmeal cookies "by eye".

200 g oatmeal
100g sugar
50 g wheat flour
salt, vanillin, cinnamon, soda
2-3 st. l sunflower oil
50-75 ml of water

First, I threw the cereals into the bowl of the combine and chopped them, added sugar, wheat flour, salt, added a pinch of vanillin, and put in cinnamon as much as I wanted, put soda (on the tip of a knife), mixed on a pulse mode. I poured sunflower oil (I poured it on the eye, so I don’t know exactly how much of it there), again on the impulse I twisted it so that the oil seized with the flakes, added water, and quickly stirred it on the impulse.
It turned out to be such a sticky mass, I spread it straight with my hands in piles on a baking sheet. The cookies blur when baking, so I laid out the piles at a distance so that the cookies would not stick together.
Baked in an oven preheated to 180-200 degrees until tender (about 15 minutes, maybe a little more). Oatmeal cookies are specific, they do not need to be baked until golden brown. I poked my finger, thought it was still raw, and when I tried it, I realized that it was already ready. When ready, immediately remove from the baking sheet until they stick. Allow to cool and eat with pleasure

[Daffi]

Daffi
Is there a special form for him?

In the sale of these forms in bulk in every supermarket they are (we definitely have). In this form I bake muffins, bread and terrine. I have it made of glass, but you can buy an inexpensive metal one. You can even in a round oven, you will say that this is a meat casserole
So I found a photo in the internet of an inexpensive form so that they knew how it looks. Next to the photo I found an interesting recipe for terrine


The Internet is full of terrine recipes, they are made not only from chicken, but also from rabbit, pork, beef, vegetables are put there, you can't list everything. Chicken terrine is considered dryish, so the form should be lined with strips of bacon, and then spread the minced meat. Surely you can put melted chicken fat or butter in the minced meat. This will most likely be tastier, but I don’t do it, because I don’t like fatty foods and I don’t eat lard, so I have such a dietary option.

[Daffi]

Daffi, Thank you! Terrin - I will definitely try. Looked at the site doing a lot of them. And thanks for the cookies!

Try it, terrine is easy and simple, especially in baby Phillips. Only the minced meat is not all at once, but it is necessary to grind 2-3 times, otherwise the combine will not pull large portions, according to the instructions, it has 200 g of meat or 300 g of chicken fillet.
By the way, about 300 g fillets in our instruction is not written, but in another instruction, which is intended for the Baltic countries, Slovakia and Hungary, it is written, there is generally more information and recipes. And our instruction is somehow not completed yet

... And our instruction is somehow not completed yet

What is true is true!

Girls! Ken's husband gave me 724 today! I'm so happy
Now I have to go to cook the soup - I want to try fresh potatoes and carrots in a chopper. Isn't it too hard for him? Well, for a festive dinner, of course, mashed potatoes

Girls! Ken's husband gave me 724 today!

read ONLY the first line and laughed heartily! I almost wrote "Didn't you buy a Barbie?" ))))))))))))))

congratulations on the new thing! (and with such a wonderful husband))))

Girls, tell me who uses the Kenwood HB891 blender with graters, how does it work? Is the bowl too big if you grind 1-2 onions into soup and grate 1-2 carrots? That is, I want a device for a small volume of products, but it has the smallest 1L bowl of all, I didn’t seem to find others, and it looks stylish. Or take a simple shredder for these purposes?

, and looks stylish in appearance. Or take a simple shredder for these purposes?

I confirm the handsome man - you can't take your eyes off
Especially red
I think it will be cooler than just a chopper.
But it's very interesting to read reviews from real users.
What you are doing?
As a result?
How easy is it to wash?
The latter is not unimportant.
Keshi pleases me with the ease of washing and cleaning after use.

girls who have Braun MultiQuick answer me! I have Braun MultiQuick3. The question is, what can you grind in a medium chopper (solid foods like sugar, etc. can you?) And what is this super fast chopper? Look at him. I looked for a photo in the internet, but did not find it

Girls, I live in Lipetsk. Was yesterday in the Mediamarket, there are huge "stacks" with 724 kenwoods of 3000 rubles each. If anyone needs to buy. Maybe they were brought not only to our Mediamarket, but are there also in other cities?
After reading this thread, 3 months ago I bought 714 for 2600 rubles, and now I regret that I was in a hurry. The blender is really super. But in 724 there is a chopper, and I constantly need it, the old one broke down.

Girls, I live in Lipetsk. Was yesterday in the Mediamarket, there are huge "stacks" with 724 kenwoods of 3000 rubles each. If anyone needs to buy. Maybe they were brought not only to our Mediamarket, but are there also in other cities?
After reading this thread, 3 months ago I bought 714 for 2600 rubles, and now I regret that I was in a hurry. The blender is really super. But in 724 there is a chopper, and I constantly need it, the old one broke down.

Completely forgot!!!
Now Kenwood has released a new blender 723. It is not entirely clear what is the difference between it.
But the most important thing
In Media Markt Dybenko 724 was 2600 !!!!, and 723 - 2990.
Obviously a marketing ploy.

I looked in the Yandex market. There is an uncountable number of Kenwoods: 710,713,714,723,724, etc. They are distinguished by the presence or absence of: turbo mode, several speeds, a complete set of nozzles and weight
For every taste and budget

And I bought a DEH blender yesterday. The price is ridiculous 250 UAH. Power 600 W, 6 speeds, turbo. The blender leg is made of iron. The glass is high. Whisk + there is also a Glass with a chopper.
Today I tried a whisk - whipped up the whites. Whipped well, until thick. So cheaper doesn't mean worse.
The seller said they are buying a lot.
So DEHU respect

[Keti]

Keti and which of the DEXs did you choose? and where did they get it?

And I bought a DEH blender yesterday.

Keti, I also have Dex, but I'm still afraid to test the whisk. In this regard, the question is: is it somehow fixed in your connector, or is it freely entering and exiting? I looked in the instructions - there shouldn't be any clicks or tricky locks. In the illustration, the whisk is simply inserted into the connector in a straight line, without any twists. Does it fall off while working? Well, it hangs out quite freely! Develop doubts, pliz!

azaza yes no, it sits tightly, does not dangle, I don’t remember the click, but when I beat the whites and already disassembled it, I barely figured out how to remove it, it seems like you need to press the buttons on the side. Next time I will whip it, I will definitely pay attention.

Ahh, I understand, you probably forgot to put on one more thing - a small cap for inserting a whisk.At first, I also tried to stick the whisk into the blender, and then I remembered that there was still an additional cap there.
In general, of course, I like it more when there are 2 beaters (like I have in a mixer), and it is somehow unusual to beat with this whisk, it is very light, but in excuse I will say again that the whites are whipped very well.

[Keti]

Ahh, I understand, you probably forgot to put on one more thing - a small cap for inserting a whisk.

Urrra, inserted !!!
Not, Keti, I immediately inserted it exactly where it was necessary, but did not completely put it on. I thought that it’s already all the way, there’s nowhere to go, but no. I pressed harder - everything clicked perfectly. And she was about to change the unit
People who else will buy Deksika - feel free to put the whisk into the connecting device all the way, do not be afraid to make some effort - the whisk will stand up like a glove.
In general, the blender is excellent. As I said Keti - 600 W, 5 speeds, turbo, and complete set: metal leg, chopper, whisk, glass. The only thing missing is the glass lids, but this is not critical. The buttons are very comfortable to press. And the price is three times lower than that of a similar set of Brown. That being said, Brown has a 1-year warranty, and many blenders die shortly after it ends. Dex has a 2 year warranty. If he dies after it has passed, you can buy another one for ridiculous money. But I hope that he will live happily ever after. I already have three Dexes: a cartoon, a blender and a yogurt maker. All three units are of excellent quality and at a ridiculous price. Recommend.

azaza, did you like the blender leg in your work? And the chopper?

[Keti]

Keti, leg - definitely liked it! I used the blender solely for the mayonnaise, so the "leg" is the most important thing about it for me. Mayonnaise makes one or two - less than a minute. Earlier in the stationary I had to sausage for half an hour. Whisk and chopper are nice bonuses, so to speak.
Choosing a blender, I came across a couple of reviews that Dex sprinkles great. Of course, I haven't tested it a lot yet, but I can say about the leg: no splashes! I made mayonnaise in a glass - so I did not find a single drop above the level of mayonnaise, the glass is clean, as if the mayonnaise had already been poured into it. So my main fear was not confirmed.
And this is all that I have used for now. I can't say that my blender will be very busy. The family is small, and now my husband is away, and I alone, as it turned out, need very little. Will be back soon, then I'll check the chopper with a whisk - just the guests have already been invited, there will be a reason to use a new assistant. I will definitely share my impressions - so that people know whether to take cheap equipment. Itself has suffered in search of reviews about it. If not for my beloved mule, I would hardly have dared to take the pig in a poke. But the mule of the same name is so good, it was she, one might say, who made the choice for me.

Does anyone else have an inexpensive blender to use other than Dex? I read reviews on the Internet, bad reviews about scarlets, Vitek and Orion.

Why doesn't Dex fit? I just used it. Well, very good, and even for such a price! The whisk does not splash at all, the chopper crumbles remarkably. Well, a leg - mayonnaise in a minute. Caring for him is minimal. What else is needed, especially if you are not chasing brands.

I just want to check all the options, suddenly someone will give additional information. Have you been using Dex for a long time?
I have a dilemma. A blender (even without attachments) asks to buy my mother, for the amount that we have, you can buy a Gorene 451 model (just one iron leg for 400 W or let's say Dex for 600 W with a bunch of attachments. than all of them have approximately the same drawback - poor-quality fastening between the drive and the attachments.Either the plastic melts, then crushed by friction, etc. I regret that I did not keep a generalizing post dug on the Internet, where the assumption is made that all inexpensive blenders unreliable, made with a defect.

I also spent a long time choosing which one to buy.After reading the forums, I came to the conclusion that nowadays expensive brands are no longer as reliable as they used to be, very often they "die" exactly at the end of the warranty period. And the point is to lay out a lot of money for the name, if the reputation is specifically tarnished by numerous breakdowns? And I don't need Kenwood, praised in this topic, with a nozzle for mashed potatoes - I don't eat potatoes.
In general, I decided on Dex. Warranty 2 years, power, full set, and even the price - a song! If he flies immediately after the end of the guarantor. term - for that kind of money I will buy another one of the same. However, the decisive factor was not Dex's cheapness and not a 2-year warranty. I have a cartoon Dex, which I am very happy with. And, apparently, I'm not the only one who is happy with Deksik. I hoped that Dex's blender was okay too. By the way, these yogurt makers are very much praised. I was thinking about buying a Zelmer blender for 505 UAH, but in the end I bought a blender plus a yogurt maker for 400. I am more than satisfied with both apartments. But I have been using it quite recently, so, of course, I cannot give a head for cutting. Any technique is a lottery, whether it's cheap or expensive.

all have approximately the same drawback - poor-quality fastening between the drive and the attachments.

That's just Dex's mount at height!

So I think about the same, but still decided to collect information for a couple of days.

I like DEX more and more. I chopped the hardened carrots in a chopper - in half a second! Good girl.

Girls, and I trudge (for a week now) from Bamix! I couldn't even think that such a small thing could replace a whole combine, and it does!

I like DEX more and more. I chopped the hardened carrots in a chopper - in half a second! Good girl.

Keti, yeah! And most importantly, for absolutely ridiculous money

Does anyone else have an inexpensive blender to use other than Dex? I read reviews on the Internet, there are bad reviews about scarlets, Vitek and Orion.

I have Saturn for two years. Complete set: leg, whisk, chopper, graters. I do not use graters, because there is BOSCH for this. The only drawback for me is the lack of a glass.

do not write the model? I heard about dull knives from Saturns ...

do not write the model? I heard about dull knives from Saturns ...

ST-FP1065 Impressio. Chops raw, boiled meat. I use my foot to make mayonnaise, pates, grind raspberries for the winter, etc.

[vera100865]

I went to see them at the office. site, there prices are biting, the cheapest blender is almost 5690r. Wow

vera100865
You're right, my Bamix-a costs the same as my kitchen. Kenwood 760 machine.
Swiss quality, and these are not just words, I am convinced of this every day. This is my sixth blender, and I think Bamix is ​​everlasting.

[vera100865]

vera100865
This is my sixth blender, and I think Bamix is ​​everlasting.

6th bamix ???
What about the aluminum leg?
This is the first thing that really turned me off from bamixes.
A question for you as a user.
How do you change attachments? How can you take them off?
They are tiny and attached from below.
And how can he replace the harvester? ?

6th bamix ???

Are you twisting?

What about the aluminum leg?

Who told you that?

A question for you as a user.
How do you change attachments? How can you take them off?
They are tiny and attached from below.

Fingers, lightly and silently.
But, to be honest, at first I did not succeed until my clever husband intervened.

And how can he replace the harvester? ?

Like all harvesters, it performs many operations!

Are you twisting?

Who told you that?

Fingers, lightly and silently.
But, to be honest, at first I did not succeed until my clever husband intervened.

Like all harvesters, it performs many operations!

about the sixth Bamiks - you didn't specify - so I asked.
As for the aluminum leg, I repeatedly touched it, felt it and, accordingly, personally saw it.
Moreover, some kind of aluminum does not inspire confidence.
They killed the nozzles outright - the poem is interested in how the users cope with this.
I just can't figure out what can be done with bamix - so that it becomes a combine.
Sites viewed
I read a lot - and I don't understand yet
Why so much money ?? !!!!!!!!
I saw a similar blender from someone from well-known brands.
Already with a removable leg and it seems like the price was closer to the people

[Zvezda askony]

Zvezda askony
My first bamix, before it there were blenders from other manufacturers, the engines gradually weakened, unable to withstand daily use. The last one, Ken 724, was given to her daughter as a new one, otherwise I would have quickly finished him. In Bamiks, the axle and transmission are made of high quality steel, and only the guard is made of aluminum (many other manufacturers are made of plastic). Why not stainless steel? I think the manufacturer tried all the options to get the best quality blenders. And if the stainless steel would show itself from the best side, we would now have Bamiks with a casing (leg) made of stainless steel. I think the difference in price between stainless steel and aluminum is not so significant.
First, let's understand what a harvester is. This is a unit that performs more than two operations. Bamix makes them much larger: chops, chops, grinds, whips, mixes and much more. I have already tried all this, although he is only 10 days old. The day before yesterday I was preparing Bird's milk. The bird's milk turned out to be amazingly lush and tasty. I've never gotten such a bird before. Usually, after adding butter and condensed milk, the fluffy mass of whipped protein settled significantly, here - nothing like that. Before, to make a cocktail, I added up to 10 (!) Ice cubes, in Bamiks - not a single one! A fluffy cocktail is obtained even from ordinary milk, a thick soufflé is obtained from chilled milk, and if you add frozen berries, you get real ice cream. It takes exactly 20 seconds to make the mayonnaise, I timed the time. The shredder consists of 5 graters, shreds perfectly, as smoothly and beautifully as Berner.
From the nozzles, I generally trudge! Every recipe has its own attachment, made of excellent steel!
Zepter has a similar MixSy blender, but they still failed to produce the same speed as Bamix, and even more so. The other day I saw in one of the online stores Bamiks of the maximum configuration for 9.5 thousand, the minimum for 4.250.
What do we pay for when we buy an expensive product? Of course for the quality. If I had bought Bamix earlier, I wouldn't have wasted money for previous blenders. Experienced people say the truth: - We are not rich enough to buy cheap things.
I will try to "report" annually on the state of Bamix-a.

Shl. I forgot to write about the grinder mill. Now I know what it means to grind to dust. It is into the dust, if desired, that the mill grinds from bamix. Although there is a mill attachment for the Kenwood combine, I don't like how it grinds, not into dust.

When ZVEZDA buys Bamix - then I will believe that he is super duper.
All that deserves attention - she has.
And so - as the classic used to say - I do not believe!
About the dust.
And what needs to be crushed into dust?
And where can you contemplate how bamix does it?
If there are more than two actions, this is what the cache does perfectly (the one that is 724)
Anything can be broken.
Unbreakable Bamix - I guess - will not survive the "meeting" with the floor.
And if aluminum is so wonderful - why do other manufacturers not obstinately follow the example of Bamix manufacturers?
I am not because I find fault
I just sincerely want to understand - and well, it just doesn't work out.
And how will I hold it in my hands again ...
Filipochek with cubes is even closer.
If it is at a reasonable price, I will definitely buy it.
He even makes cubes. and the leg is narrow - though I haven't tried it on - will it fit into a standard 800 g jar?
As far as I understood, the only thing - from the uniqueness - that bamix makes is cold foam made from 0.5% milk.
I tried the milk itself - well, oh-oh-oh-h-e-n for an amateur.

If it is also whipped, it is unlikely to be tasty.
All the rest -
ice - to be honest, it is not necessary - therefore I did not do it on anything.
Shredder in 724 - excellently chops everything you need.
Mash nozzle - Keshiks have more convenient and more pleasant cleaning. again so - no need to remove the dirty piece of iron with gentle hands - and no need to think about how to do it better.
I will buy bamix with pleasure - if I understand why it is so unique and believe in it.
Bye - it reminds me a lot of the infamous Kirby vacuum cleaner

Hostess, recommend the hand blender model in the $ 100-130 price range !! The main purpose of use: shredding, grating, making cocktails, soup puree. I saw a new model of Phillips-cube, but there were only knives in a small bowl, but I would like to make potato pancakes and minced meat. In principle, I can buy a diser for cubes, what is more important to me is what I indicated above !! Thank you girls who will respond to my request for advice))))

When ZVEZDA buys Bamix - then I will believe that he is super duper.

Are you sure that Zvezda doesn't have it? Me not.
Moreover, I saw on our forum, in one of the photographs with a culinary work, in the background MixSy. Many people have Bamix, but they just don't want to write about it. And they are right, good technology needs no advertising.

And what needs to be crushed into dust?

For example, I ground sugar into powder; coffee to make tiramisu; cinnamon sticks for pie. Great job, I tell you!

And where can you contemplate how bamix does it?

I can't even tell you where! But, definitely, it is better in real life!

Anything can be broken.
Unbreakable Bamix - I guess - will not survive the "meeting" with the floor.

And which unit will survive the meeting with the floor, maybe you know? I think that testing blenders for impact resistance would not enter the head of any normal person. Although I am sure - Bamiks will safely endure it!

And if aluminum is so wonderful - why do other manufacturers not obstinately follow the example of Bamix manufacturers?

Why should they?
Although who knows, maybe they are, but we do not know who, besides Zepter, followed their example.

I just sincerely want to understand - and well, it just doesn't work out.

And I can't understand you, why do you need it?

Filipochek with cubes is even closer.
If it is at a reasonable price, I will definitely buy it.

It is your legal right to buy what you personally like.

As far as I understood, the only thing - from the uniqueness - that bamix makes is cold foam made from 0.5% milk.
I tried the milk itself - well, oh-oh-oh-h-e-n for an amateur.

Milk beats up absolutely any fat content. Every day I am convinced of this. And very tasty, I assure you! Cappuccino with whipped cream or milk, thick soufflé with berries, ice cream that I make in just a minute. This is a minuscule amount of what he can do.

Chopper in 724 - perfectly chops everything you need.

So let him grind, who is against it?

Mash nozzle - Keshiks have more convenient and more pleasant cleaning. again so - no need to remove the dirty piece of iron with gentle hands - and no need to think about how to do it better.

Poor tender hands ... and a dirty piece of iron ...

I will buy bamix with pleasure - if I understand why it is so unique and believe in it.

I very much doubt this, so much negativity from you spills out on this blender, why did he so offended you.

Bye - it reminds me a lot of the infamous Kirby vacuum cleaner

And why is he sad? I know the owners of such a vacuum cleaner, they are very satisfied!

No need to pounce on everyone who comes into the topic with a post about Bamiks, do not be like a Cerberus.
It would be very good for you to go through and read, perhaps you will finally understand how your posts look in the eyes of the reading people.