Kenwood kitchen machine: working with attachments

[Prus - 2]

Prus - 2, Lyubochka, thank you! At the same time I read the kitchen machine and the attachments. Now it's all disconnected and not without loss, of course. And sometimes it is difficult to understand a lot. And including about the grater for potato pancakes is also difficult to understand, down to which set of graters it is from, whether from a 7-disc set of a high-speed grater, or from a set of food processor graters. So I'm trying to figure it out.

[Masha Ivanova]

Masha Ivanova, Lena, there is no such high-speed disk for potato pancakes at all, only the processor.

[LudMila]

LudMila, Lyudochka! Now, with your help, I understand. I have a food processor, but no high-speed one. And outwardly, in the high-speed one there are graters similar to a grater for pancakes, even two graters. In the morning I watched the next video. So I get confused in them. It's one thing to watch videos, and it's another to watch them live. But thanks to the consultants! Now I'll get to the truth!

only the processor.

Nope .. at low speed yet !!

[Olya]

Olya, well, Lena asked about the disk.))

And I have a question - did anyone find a saber knife for the KAX950.ME meat grinder?
In the discussions, I found only information about the knife for 955.
So I haven't received a meat grinder yet, but I want a new knife.))

[LudMila]

LudMila, Luda! Have you found a meat grinder somewhere 955? You can then link me in PM! You are welcome!

[Masha Ivanova]

Masha Ivanova, Lena, no, I ordered the 950th in Okey, that's why I'm asking about a knife for her.

[LudMila]

LudMila, it is clear, Luda.
By the way, I haven't really seen the differences between 950 and 955 meat grinders in the subject. Maybe I just haven't read everything yet.

I did not see the differences between 950 and 955 meat grinders in the subject

As I understand it, they differ in diameter, the 955 has a little more grilles. Maybe there are other differences.
I found it, Olga wrote:
Kenwood kitchen machine: working with attachments # 2210

[LudMila]

LudMila, Luda! Thank you again. Just then, like 955, literally three or four people bought it. And therefore, I did not find anything about any differences in the work of the 950th and 955th.
It's just interesting to read, even about what you can't buy now. I increase the level of self-education during the period of self-isolation.

And how is the saber knife different from the usual one?

Here on the site you can see how a saber-shaped one looks, its edges are sharp (I don't remember how to insert links to pictures).

Oh, what I found for the AT950:
🔗
What do you think will do?
WHAT and AT differ only in the type of pin for the socket?

[LudMila]

LudMila, Luda! So, according to your link, this is the knife for the 950th?
Is there a 955? It seems to me that I saw a knife and a couple of other details somewhere. It's just that now I read and collect all the information into my daddies .. But I don't have time to collect everything right away, and then it's hard to find it.

[Ludmila]

LudmilaWhat a gorgeous link! That is, you can buy everything there for our Kesha? There are also large grilles - my dream is striped! Well, the knife is sickle-shaped to a heap (by the way, why is it better than the usual one?)

is this a knife for the 950?

It is written that yes, for the AT950. But it is complete with a grate, and theoretically one knife is needed.
Interestingly, this one is the same as in the kit? ... He does not have any mention of 950 in the description, but it looks very similar (square 10, for a grid of 62):
🔗
About 955 - I need to look, I don't need it for 955.))
There is also:
🔗

By the way, why is it better than usual?

They say that it is noticeably sharper. I remember Olga VB's delight when she bought a similar one for her 955.

There are also large grilles - my dream is striped!

This?
🔗
I also laid my eyes on her.))

[LudMila]

LudMila, Luda! Probably, in this store I saw 955 This is generally a great store. We still have to see what these knives are made of. I remember. that everyone was looking for Axion from stainless steel. We need to look at these, and at the knives, and at the large grates, what kind of metal they are. Now I just quickly looked, I didn't even read what they were from.

[Ludmila]

Ludmila, She. Only here delivery is Moscow. I wonder if you can trust them and pay in advance? I need in St. Petersburg

This store has a department on Dubrovka, I work there nearby. But now at a remote location, in Moscow I do not visit (and I do not want to).
This garbage with a crown will end, I'll go there for reconnaissance.))

Dear members of the forum, good afternoon everyone.
There is a desire to buy a nozzle for making pasta.
There is Kenwood 8300 S CHEF XL TITANIUM.

As far as I understand, there are two nozzles for pasta. KAX 910 and KAX 919ME.
Which one will fit my Kenwood? I met a mention that you can take any one, since Kenwood has the same socket for this nozzle.

you can take any one, since the socket for this attachment is the same from Kenwood.

Girls and boys!! Today in OKeya I saw such an attraction of unprecedented generosity !!

Olya, what else is there? I did not find anything about the promotion on the site

Does this smiley mean any?
I just can't find a nozzle on sale in St. Petersburg. I will order from another city. I don't want to miss :)

Irisha, hello! We fasten the disk to the prepared piece of wood (the hole in the middle, so that the central handle enters; grooves for needle holes - everything is as in the photo), fasten it with thorns down. And then in each hole - we bale a grater with a clove to make it bigger. And now those thorns become larger and open more powerful! And she rubs after that, like a beast! When we thought about the best way to grate, we conducted an experiment with Almond - we compared graters with Boshevskaya for potato pancakes. In Boshevskaya, the holes are slightly larger and the thorns are more open. So Mindalkin's husband thought to fix the grater like that! And after that, one of the girls and the pictures laid out how to make a wooden base. I'm just happy that my son-in-law put the grater in order so easily! In short - with thorns to a piece of wood and carnations from the inside out and bale on it. Just make sure to make grooves, as in the photo and a hole for the central handle! The disc is thin, if it does not fit tightly to the piece of wood, it can lead it.

Lyuba, did you do that to yourself? I will not go anywhere to get a wooden disc with a hole or what can be adapted instead. From the moment of purchase, the disc was not used, he just chewed the product, and so the child wanted to make airy carrots, well, not to mention potato pancakes.

I didn't find anything about the promotion on the site

And this, it seems, is not a promotion now, just discounts.
For Kesha, only a meat grinder and a set of three pasta attachments.
Here in Moscow:
🔗

I didn't find anything about the promotion on the site

Sorry to get in.
There is nothing on the site (at least in St. Petersburg). I also wrote a couple of pages ago about the same action (in fact, the action itself with stickers and a 50% discount was in winter, then it was on the site), in the last Okey catalog (until April 22) there was a small picture about the Kenwood sale -60%, and now they are selling off the rest. In our Okey today there was a lonely gutted meat grinder and several mixers with a full price tag, although when checking the prices they show a discount of -60%. I really hoped that a low-speed grater would be pulled out of the bins, but no.

------------------
And at the same time about potato pancakes. Just today I made it from the cake obtained in a juicer. I liked it very much) This thought tormented me for several days, but I look - on the Bread Maker and there are two recipes with this idea)

There is nothing on the site anymore.

In St. Petersburg there is a set of pasta attachments:
🔗

In St. Petersburg there is a set of pasta attachments:

Yes, I see it now. And last week they had nothing.

[Prank]

Prank, Nadia, of course I did! The son-in-law took a piece of chipboard, made a central hole and grooves for the teeth and punched it.The disc has become - a song! Rubs lightning fast! Well I wrote - no worse than Boshevsky!

[zvezda]

I didn't want to, but I bought a typewriter + a meat grinder, a grater. There was also a pasta attachment, but I have an elephant. I had to take a separate blender, here it is definitely cool, but - but. ... All this "wealth" has nowhere to put, that's absolutely. Boshik turns out to be very tiny, and everything was in it. (those attachments lay separately, on the countertop only the base). Eh, zvezda, zvezdaWhat are you doing to people ...
Girls and boys, is a cube cutter suitable for this machine?

Is a cube cutter suitable for this machine?

On kMix? Yes, it is put on the low-speed nest, where the meat grinder is.

Eh, zvezda, zvezda,

I wrote to you that attachments do not go to this car !! Who needs it, I repeat! I can go tomorrow - buy - send (if left, of course) who needs a meat grinder of article AT, then with pleasure I will sell at such a price !! This is from MVideo, there is a promoter of them ,,,

[zvezda]

zvezda, Olya, everything fit perfectly. I measured everything in the store.

everything fit perfectly.

Come on ... I'll take a look ... are you talking about the car in OK ??

Yes. Both the grater and the meat grinder stood up like family ("how" can you remove) Those rolling out for the pasta that I did not take, also fit. I am very sorry that I did not go earlier. They say that there was still some kind of attachment. I would like a cube cutter, and something else. (My toad presses, but dreams)

[Oksana]

Aaaaaaaa ... forgive me at all .. in my mind I was thinking about a blender, but it turned out to be a dough sheeter ... of course they fit and you can! Sorry to mislead anyone ...



Oksana, we didn't have a grater, only a meat grinder ..

Going to complain about Okay. They didn't bring my meat grinder today ...
Kinda postponed delivery to May 1, and the comment is out of stock. And it is no longer on the site, but yesterday it was still ...
I remember my epic with the mill, when instead of the discounted one they issued a new one, because while I was texting with the manager, they managed to sell the first one. But once they promised, you must keep your word! And even there was no prepayment.
It is surprising that Okey does not book the purchased goods.

Okey does not book the paid product

Wow !!!

Good afternoon, can you please tell me if it makes sense to buy a blender bowl for Kenwood? who has?

[Oksana83]

Oksana83, Oksana! You mean a glass jug?

Yes, he is the most

[Oksana83]

Oksana83, if there is no other blender, then it has!
I didn't buy, Kenwood stands next to Ninza from me. I have enough blender in Ninza. Although, if the action comes across it will be possible to take, probably

[Oksana83]

Oksana83, Oksana! I agree 100% with Rita's opinion. The blender is very good. And this type of blender is needed in the kitchen. But if there is already a detached one, then I would not buy to Kenwood. Very often people generally sell these blenders. So you will be determined depending on your needs.

The fact of the matter is that there is no, and I think its power is enough for solid products?

for solid foods?

I mean, for which solid ones? Grind grain, coffee?

Rice for example

[Oksana83]

Oksana83, Oksana! I won't say anything about rice, I haven't tried it.
Tell me, how much can you buy this blender for? And how are you with the place in the kitchen? If a blender for Kenwood is expensive, then it is definitely better to buy a freestanding

Rice for example

I'd rather buy glasses for rice. That is, I just bought them, plus a smoothie attachment. A blender replaces all this for me, and although there is a separate one, I completely stopped using it.

Tell me, how much can you buy this blender for? And how are you with the place in the kitchen? If a blender for Kenwood is expensive, then it is definitely better to buy a freestanding
[/ quote]
Stand alone if you take a good one about 15,000, and a bowl of 5,000

I'd rather buy glasses for rice. That is, I just bought them, plus a smoothie attachment. A blender replaces all this for me, and although there is a separate one, I completely stopped using it.

and what foods have you tried?

I'd rather buy glasses for rice. That is, I just bought them, plus a smoothie attachment. A blender replaces all this for me, and although there is a separate one, I completely stopped using it.

What kind of cups

[Oksana83]

Oksana83, Oksana! We must wait for a response from other members of the forum who tried to crush something solid there. In terms of money, the situation is clear. Five, by the way, is also a pity to spend. So we still need to think.
And the cups are another attachment. Also costs money almost like your blender. Multi-shredder AT320 Someone is delighted with it, someone does not like it. And in any case, the volume there is small. For rice, maybe for herbs, for a little sauce, mayonnaise, etc.

There are no comrades for taste and color. But to take a detached one for 15, when can a nozzle be for 5? Whether you need it or not, only you can decide. You need large volumes, for example, for cream soups, take a blender. I have enough nozzles for this smoothie (but they gave me one as a gift). If not, I would have bought a blender. But I would definitely not crush rice with a blender.